Portable Dust and Fume Collector & Extra

CORMAK FM350+FILTRY PYŁOWE

Condition: excellent (used), Year of construction: 2022,

Condition: excellent (used), SICAR Forte 400 thicknesser Working width 400mm Planing height 300mm Ksdpfxst Rp Hxe Anxenb Shaft with conventional knives Shaft with 4 knives Shaft speed 5200r.p.m Electric lifting and lowering of the work surface Main motor 3kw 3 feed speeds CE certificate

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/5 Belt width: 500 mm Knedpfsw Ad Rrex Anxsb Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Knsdpoudi Uzsfx Anxob Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. Ksdpfx Aszp Edwsnxjnb All specifications according to the manufacturer.

Condition: excellent (used), I will sell a DDR motor pump. - 800l/min Knedpfxjv Nrf Ej Anxjb - 28PS. - Very good condition.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM300 Dust Collector – High-Performance Extraction System for Professional Woodworking The CORMAK FM300 is a high-performance dust collector designed for intensive use in woodworking shops, furniture manufacturing facilities, and industrial production environments. Equipped with a 1.5 kW three-phase motor, a dynamically balanced steel impeller, and a robust steel frame, the unit delivers reliable extraction of sawdust, wood chips, and fine dust with an impressive airflow capacity of 2,530 m³/h. It is an ideal solution for professionals seeking durability, efficiency, and dependable performance. Key advantages High extraction capacity of 2,530 m³/h – suitable for operating multiple woodworking machines simultaneously. 1.5 kW three-phase motor (400 V) – delivers consistent power and reliable continuous-duty performance. Dynamically balanced steel impeller – ensures smooth, quiet operation with minimal vibration and extended service life. Large 150 L collection bags – reduce downtime by requiring less frequent emptying. Y-shaped inlet – configurable as 2 × Ø100 mm or 1 × Ø130 mm for flexible machine connections. Mobile steel base with four caster wheels – allows easy movement between workstations. Quick-release fabric collection bags – simplify maintenance and improve operator convenience. Construction and technology The CORMAK FM300 features a heavy-duty welded steel frame mounted on swivel casters, providing both stability and mobility. At the heart of the system is a high-efficiency centrifugal fan equipped with a dynamically balanced steel impeller, delivering powerful suction with low noise and vibration levels. The versatile Y-shaped inlet allows fast switching between single- and dual-hose configurations, making the unit adaptable to a wide variety of workshop layouts. Precision and performance Operating at 2,850 rpm, the FM300 generates strong airflow capable of efficiently extracting both fine dust and heavier wood chips produced by sawing, planing, routing, and sanding operations. The generous bag capacity minimizes interruptions, while the optimized fan design helps prevent clogging and ensures uninterrupted operation even under demanding production conditions. Applications The CORMAK FM300 is ideal for: professional woodworking and furniture workshops extraction from table saws, thickness planers, jointers, spindle moulders, and routers industrial production facilities requiring central dust extraction technical schools and vocational training workshops carpentry businesses and custom woodworking shops Standard equipment Y-shaped steel inlet (2 × Ø100 mm or 1 × Ø130 mm) Mobile steel base with four caster wheels Two fabric bags (filter bag and collection bag) Optional equipment Flexible Ø100 mm suction hose (custom lengths available) Galvanized hose clamps Knsdpfx Ajvu Atwenxjb Disposable plastic collection bags for quick replacement Technical specifications Parameter Value Airflow capacity 2,530 m³/h Maximum vacuum 1,800 Pa Noise level 70 dB Motor speed 2,850 rpm Motor power 1.5 kW Power supply 400 V / 3-phase Collection bag capacity 150 L Number of bags 2 (filter bag + collection bag) Suction inlet 1 × Ø130 mm or 2 × Ø100 mm Dimensions (L × W × H) 940 × 510 × 1960 mm Weight 56 kg User manual Included CE Declaration of Conformity Included

Condition: like new (used), Year of construction: 2004, WEINIG UNIMAT SUPER 4 planer – German production - very good condition – year of production 2004 – DTR TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools upper adjustable head 1) lower head 11 kW 6000 rpm 2) upper head 18.5 kW 7000 rpm 3) lower head 5.5 kW 6000 rpm feed motor 2.2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic clamp three upper steel-plated pulling rollers one rubber top roller grooved top pre-top length 1950 mm total power 37 kW central lubrication Knodpfxein Nrge Anxeb Transport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg

Condition: new, Year of construction: 2025, Suction nozzle diameter: 1 x 200, 3 x 100 mm Nominal air flow rate: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Motor power: 3 kW Noise level: 78 dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Ksdpehpmawsfx Anxsnb Weight: 178 kg

Condition: used, Year of construction: 2003, Filter area: 50 m² Exhaust connection: 300 mm D Kodpfxezb N T Us Anxenb Dimensions: 1650 x 1580 x 3550 mm Weight: approx. 500 kg Substructure with discharge screw: Motor: 1.5 kW Briquette press Schuko C 800 - 2 Connection value: 3 kW Throughput: approx. 35 - 55 kg/h, depending on the material With extinguishing system Weight: approx. 1200 kg Storage location: Nattheim