CNC lathe

DAEWOO

Condition: used, Year of construction: 2000, operating hours: 16,672 h, functionality: fully functional, machine/vehicle number: 2S080254, turning diameter over cross slide: 250 mm, turning length: 400 mm, turning diameter: 250 mm, spindle bore: 50 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, Equipment: documentation/manual, Very fast lathe, used only for finishing. Highly precise machine. Redpfxjyi Abhe Al Iet

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 1,050 mm, feed length Y-axis: 360 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, Equipment: documentation/manual, Tiger FO 135 universal milling machine Description of the machine The machine was purchased new in 1994 and has only been in operation for a few hours. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition. good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a digital readout for the 3 axes, which makes it possible to work with cutter compensation and recurring measurement machining. Operating instructions are included with both the machine and the digital indicator. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic traverse path: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: Rodpfxsrqwbio Al Ijt ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ Direct current motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast feed ➢ Lengthwise and crosswise 3,000 mm/min Vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low-voltage electrical controls on the pushbutton panel of the side arm - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Machine dimensions (for transportation) ➢ Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accessories - Counter supports for cutting shaft - Cutting shaft ø32 mm Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully functional. Axis movements are smooth and the guides are in good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a DRO for the 3 axes, which offers the possibility of working with milling compensation and recurring measurement processing. Both the machine and the DRO come with operating instructions. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic travel: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed services: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast forward ➢ Longitudinal and transverse 3,000 mm/min ➢ vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low voltage electrical controls on side arm push button panel - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Dimensions of the machine (for transport) Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accesories - Counter supports for cutting shaft - Cutting shaft ø32 mm

Condition: like new (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1435, turning length: 648 mm, turning diameter: 420 mm, spindle bore: 76 mm, spindle speed (min.): 45 rpm, travel distance X-axis: 242 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 20 m/min, rotational speed (max.): 4,500 rpm, feed rate Z-axis: 24 m/min, overall weight: 4,100 kg, center height: 240 mm, Equipment: rotational speed infinitely variable, SOLD Machine is sold Very nice PUMA 240MSB With subspindle and driven tools Rodpfeywkwhex Al Iot And chip conveyor. Very few operating hours. 8000 hours power on Subspindle max 6000 RPM Control: 18ITS with Manual Guide Bar Feeder LNS

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 575 mm, overall weight: 7,500 kg, SPECIFICATIONS Rsdpew S E Ngjfx Al Iot Longitudinal travel: 1020 mm Cross travel (Y): 510 mm Vertical travel (Z): 575 mm CNC type: SIEMENS Table length: 1200 mm Table width: 500 mm Max. permitted weight: 800 kg Number of tools: 30 Spindle taper: ISO 40 Max. spindle speed: 8000 rpm Spindle motor power: 15 kW Dimensions (L x W x H): 3275 × 2948 × 2996 mm Weight: 7500 kg Year of manufacture: 2001

Condition: used, Manufacturer: CINCINNATI Rsdpowrpykefx Al Ist

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 170 mm, rotational speed (max.): 8,000 rpm, The machine is in good technical condition, connected and available for testing, with a 30-tool magazine and Fanuc control system. Rjdpfx Aey Ewwqol Iet

Condition: used, Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 330 mm, turning length: 548 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 580 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 25 m/min, rotational speed (min.): 45 rpm, rotational speed (max.): 4,500 rpm, total height: 1,740 mm, total length: 2,997 mm, total width: 1,670 mm, feed length X-axis: 205 mm, feed length Z-axis: 580 mm, quill travel distance: 580 mm, quill diameter: 75 mm, quill stroke: 80 mm, swing diameter over cross slide: 330 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 25 m/min, workpiece weight (max.): 350 kg, type of input current: three-phase, overall weight: 4,240 kg, spindle nose: A2-6, center height: 255 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, Daewoo Puma 230B CNC Lathe — Year 1999 Controlled axes: 2 (X – Z) CNC Control: Fanuc Series 18-T Max. swing over bed: 510 mm Max. turning diameter: 350 mm Max. turning length: 548 mm Bar capacity: Ø 65 mm Spindle mount: ASA A2-6" Rsdpfxsy D Higj Al Ist Chuck: Ø 210 mm — 3 jaws Spindle speed: 45 – 4,500 rpm Spindle motor power: 15 kW X-axis travel: 205 mm Z-axis travel: 580 mm Turret: 12 positions — no driven tools Tailstock: present (quill Ø 75 mm, stroke 80 mm, MT 4) Chip conveyor: included Machine weight: 4,240 kg CE compliance: yes

Condition: used, Year of construction: 1965, There are two WMW SU 315x3000 available, connected load machine 1/ 2: 12.6/ 12kW, weight machine 1/ 2: 8.2/ 9t, machines need overhauling. Rsdpjxg Ihgofx Al Iet

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 3,080 h, load capacity: 4,500 kg, lifting height: 6,050 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,780 mm, fork length: 1,200 mm, empty load weight: 7,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,700 mm, LPG forklift Load center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: normal Redpfovcf Rnex Al Ist Front tire type: Superelastic Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire condition: 0 - 20% Description: Thorough cleaning, new inspection with oil and filter change, new set of 6 black tires, overhaul according to FEM incl. approval. Side shifter, 3rd valve, front work lights, full free lift, twin tires,

Condition: good (used), Year of construction: 2006, Parts shown by hand not come with machine. Rodpfeyzyhqjx Al Ijt

Year of construction: 1985, condition: reconditioned (used), REFORM type AR 10 type 40H face grinding machine year of manufacture 1985 30 KW grinding motor Control Modicon Magnetic control 6-stage Rsdpfxed E Np Ee Al Ist magnet size: 1000mm300mm segment head diameter: 460mm segment dimensions: 90x38x180mm Number of segments: 1 set = 8 pieces Grinding motor infeed: 0,01mm - 0,1 mm infinitely variable Hydraulic pendulum drive New supply cable between machine and control cabinet

Condition: excellent (used), Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, 3000mm Between Centres, Swing 1030 mm Turning dia 900 mm Fixed steady included Chip conveyor Spindle motor 45 kw Power requirements 62.2 kva Rsdpfx Aloy Akdle Ist Dims 7.1 x 2.2 x 2.2 m 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Machine is in excellent used condition Videos can be sent on request

Condition: used, Year of construction: 1995, operating hours: 6,807 h, lifting height: 4,730 mm, free lift: 1,670 mm, fuel type: diesel, mast type: triplex, fork length: 1,190 mm, fork width: 1,040 mm, total height: 2,150 mm, total length: 2,610 mm, total width: 1,200 mm, color: other, Empty weight: 4.622 kg Lifting capacity: 2.500 kg - Year: 1995 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 15-01331 - Operating hours: 6807 - Lifting capacity: 2500kg - Lifting height: 4730mm - Overhead clearance: 2150mm - Free lift: 1670mm - Fork length: 1190mm - Maximum fork width: 1040mm Rodeyyqtbepfx Al Ist - Minimum fork width: 210mm - Number of wheels: 4 Wheels - Attachment: 4th valve to fork carriage - Options: Free-lift, Half cabin, Work lights - Mast: Triplex - Drive: Diesel - Motor brand: Daewoo - Transport dimensions: 2610mm x 1200mm x 2150mm (l x w x h) - Transport weight [kg]: 4622kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, grinding diameter 250 mm grinding length 500 mm dimensions of grinding wheel 400 x 50 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: Rsdpexzuyljfx Al Ijt - Tailstock - Various accessories Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2005, operating hours: 10,690 h, Type of fuel: Diesel Empty weight: 11.163 kg Dimensions (LxBxH): 365 x 209 x 386 cm Lifting capacity: 8.000 kg Lift height: 498 cm Fork dimensions: 990 x 2.010 mm - Year: 2005 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 00065 - Operating hours: 10690 - Lifting capacity: 8000kg - Lifting height: 4980mm - Overhead clearance: 3860mm - Free lift: 0mm - Fork length: 990mm - Maximum fork width: 2010mm - Minimum fork width: 310mm - Number of wheels: 6 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Work lights, Full cabin - Mast: Duplex - Drive: Diesel - Motor brand: Daewoo - Transport dimensions: 3650mm x 2090mm x 3860mm (l x w x h) - Transport weight [kg]: 11163kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Rsdpfx Ajyuxm Djl Ist VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom