CNC lathe

Doosan Lynx 220 LSYC

Condition: used, Year of construction: 2015, TAKISAWA TS4000YS year 2015 CNC control FANUC 32i-MODEL B Max. turning diameter 315 [mm] Max. swing over bed 600 [mm] Max. Turning length 735 [mm] Fjdpfxewq Sf Ts Ab Uopr Stroke X axis 267 [mm] Stroke Z axis 840 [mm] Stroke Y axis -50 [mm] / +70 [mm] Stroke A axis 780 [mm] Rapid traverse rate X axis 30000 [mm/min] Rapid traverse rate Z axis 30000 [mm/min] Rapid traverse rate Y axis 10000 [mm/min] Rapid traverse rate A axis 30000 [mm/min] Spindle nose A2-8" Max. bar diameter 82 [mm] Spindle throughbore 94 [mm] Max. spindle speed 4200 [rpm] Spindle power 22 [kW] Counter spindle nose F140 Counter spindle throughbore 53 [mm] Max. counter spindle speed 6000 [rpm] Counter spindle power 11 [kW] Max. tool holder cross-section 25 [mm] Number of tool stations 15 Number of tool stations driven 15 Max. speed driven tools 6000 [rpm] Lubrication tank capacity 370 [l] Total power required 37 [kVA] Supply voltage 400 [V] Chip conveyor with machine 5 live tool holders Weight 6700 [Kg]

Condition: used, Year of construction: 2023, In the market for a Top of the Range Miyano? Then have a look at this one! 18 months old and just over 1000 hours on the clock…it is as new! Still on site where it can be seen under power. The following is from Miyano’s Spec sheet: The Miyano ABX-64SYY – is a Top of the range, twin spindle, twin turrets with Y-axis on each turret. The ability to machine simultaneously at the left and right spindles using the upper and lower turrets, both featuring a Y-axis function, means that complete front and back machining of products with complex shapes can be accomplished simply and in a short time. High rigidity and high torque with 40 Nm driven tools. The use of rigid 40 Nm driven tool drives capable of heavy cutting ensures stable milling. Two turrets with a total of 24 tool positions, all driven, handle complex machining just like a machining centre. This machine also features the optional parts conveyor, Hainbuch collet chucks on both spindles, high pressure coolant, probing and a steady rest that’s mounted on the lower turret. Machining Capacity and Chuck System Maximum Machining Diameter of Bar Work SP1/SP2 ø64/51mm Collet Chuck SP1/SP2 Stationary Power Chuck SP1/SP2 6″/6″ hydraulic drive Standard Turning Length 125mm Spindle Spindle Nose SP1/SP2 A2-8/A2-6 Spindle motor(30min./Cont.) SP1 15/11kW SP2 7.5/5.5kW Spindle Speed Range SP1 50 – 5,000min-1 40 – 4,000min-1 SP2 50 – 5,000min-1 Turrets(Upper L/R Turrets & Lower Turret) Type of Turret 2 x 12 Station Turret Shank Height of Square Turning Tool □20mm Diameter of Drill Shank ø40mm ø20mm ø25mm Slide Stroke X1, X2 axis 190mm Z1/Z2 axis 550mm/721mm Y1, Y2 axis ±40mm Zs axis 756mm Rapid Traverse Rate X1, X2 axis 16m/min Z1/Z2 axis 30/20m/min Y1, Y2 axis 12m/min Zs axis 30m/min Driven Tools Maximum Number of Revolving Tools 24 Rotation speed of Driven Tools 60 – 6,000min-1 Driven Tool Motor AC Servo 4.5kW Machine Dimensions Machine Height 2,222mm Floor Space 3,290×2,204mm Machine Weight 10,900kg Name of the machine: Miyano ABX-64SYY Fpsdpfjw I D Dujx Ab Uer

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Fjdpfxsifn N Ns Ab Uepr Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: excellent (used), Year of construction: 2022, Swing over bed 600mm, swing over carriage 400mm, 65mm bar capacity , machining diameter 350mm, Fodpfx Aswq Inqeb Uspr machining length 330mm, 12 position turret, Fanuc series I control, Spindle 4500 rpm, swarf conveyor, parts catcher, tool setter, tailstock

Condition: good (used), Year of construction: 2013, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 12 station turret, 22KW Motor, Main spindle 4000rpm, Fedpjxv Svmofx Ab Uspr sub-spindle 4500rpm, 3 jaw chucks, swarf conveyor, tool setter, magazine barfeed unit.

Condition: used, Year of construction: 2018, travel -x axis 1.050 mm travel -y axis 570 mm travel -z axis 510 mm control HEIDENHAIN - TNC620 Fpodpfsw Dgcajx Ab Uor number of spindle speeds 12.000 U/min tool taper BT 40 table dimension (L x W) 1300 x 570 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie Fodpsxcbvijfx Ab Uspr - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : DROITE - Tool probe : MIDEX BKS1S

Condition: used, Year of construction: 2019, operating hours: 2,704 h, functionality: fully functional, machine/vehicle number: MV0061-000879, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, controller manufacturer: Fanuc, rotational speed (min.): 10,000 rpm, operating hours of spindle: 2,704 h, mount diameter: 40 mm, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Doosan VC510 Twin Pallet Vertical Machining Centre with Doosan Fanuc i Series CNC Control, table size 2 x 860 x 570 mm, max workpiece height 520 mm, spindle speed 10,000 rpm, BT40 spindle taper, 40-tool ATC, X axis travel 762 mm, Y axis travel 516 mm, Z axis travel 570 mm, machine weight 9500 kg, various BT40 back end spindle tools. Fodpewv N Ntsfx Ab Uopr

Condition: used, Year of construction: 2011, For sale: 1 CNC lathe Doosan PUMA2100MS, year of manufacture 2011, including bar feeder, chuck, and tool holders. The machines are in very good condition, have been regularly serviced, and are ready for immediate use. Fodpfxsxdwayo Ab Uspr They impress with their precision, reliability, and compact design – ideal for series production.

Condition: excellent (used), Year of construction: 2024, CNC Lathe Manufacturer: SMEC Machine Model: SL 2500 ASY Control: Siemens 828 D Year of Manufacture: 2024 - Demonstration machine TECHNICAL DATA Work Area - Max. turning diameter (mm): 360 - Max. machining length (mm): 490 - Swing diameter over bed (mm): 650 - Swing diameter over cross slide (mm): 540 Travel Paths - X-axis (mm): 235 - Z-axis (mm): 580 - Y-axis (mm): 100 (±50) - B-axis (mm): 580 Main Spindle - Chuck diameter (mm): 210 (8”) - Spindle nose standard: A2-6 - Max. bar capacity (mm): 68 - Spindle bore diameter (mm): 78 - Motor power (kW): 10.5/19.95 - Max. torque (Nm): 443.7 / S6 15% - Max. speed (rpm): 4,000 Sub Spindle - Chuck diameter (mm): 175 (6”) - Spindle bearing inner diameter (mm): 90 Fpsdpfx Absw Rby Ee Ujr - Max. bar capacity (mm): 36 - Spindle bore diameter (mm): 45 - Motor power (kW): 7.5 - Max. torque (Nm): 67.9 / S6 15% - Max. speed (rpm): 6,000 Turret - Number of driven tool stations: 12 - Tool interface: BMT65 - Driven tool motor power (kW): 5.5/8.3 - Max. speed, driven tools (rpm): 5,000 - Max. torque, driven tools (Nm): 57.3 - Indexing time, station to station (sec): 0.2 - Indexing repeatability (mm): ±0.003 FEATURES + CNC control: Siemens SINUMERIK 828D incl. OPERATE + PPU290 (touchscreen) + Flat guideways on all axes + Coolant system with 10 bar delivery pressure incl. coolant gun + Oil skimmer with endless band for tramp oil separation + 3-color status light + LED work area lighting + Bar feeder interface for magazine connection + Chip conveyor, discharge to the right + Parts ejector at sub spindle incl. through-spindle coolant + Chuck blow-off device at main spindle + Parts catcher with collection box + Automatic tool measurement arm + Advanced operation features + DXF reader + 3-jaw power chuck Ø210 mm (8”) + 3-jaw power chuck Ø175 mm (6”) DIMENSIONS / WEIGHT L x W x H (mm): 3,643 (4,667) x 2,030 x 2,085 Height (mm): 2,085 Technical data and information subject to change and errors excepted.