Vertical lathe

DYE TV 5400

Year of construction: 1985, condition: good (used), machine/vehicle number: 04.2187, Hydraulic indoor broaching machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985 reconditioned Ksdoixntwjpfx Addodg Weight: 2t Model: RIW 10 x 1200 x 400 Machine No: 04.2187 Tractive force: 10.000kg at 3m/min clearing speed: hydraulically stepless adjustable from 1m/min to 7m/min return speed: hydraulically stepless adjustable from 7m/min to 30m/min maximum stroke: 1200mm Broaching tool clamping: universal drawing head for flat shanks up to 26mm width maximum workpiece diameter: Ø max. 480mm (due to oil and chip tray) table opening: Ø 70mm power supply: 380 Volt / 50 Hz / 5kW

Condition: good (used), Year of construction: 1998, table diameter 1800 mm turning diameter 2060 mm swing diameter 2000 mm work height max. 1557 mm power capacity - milling spindle 30 kW workpiece weight 12 t table drive 100 kW Kedpfx Adsw H Dkmodjdg gear box 2 Stufen grinding spindle drive 30 kW milling spindle SK50 with Grinding device

Condition: used, Year of construction: 2001, x-travel 2050 mm Kjdpfsrw Dknsx Addodg y-travel 1100 mm z-travel 800 mm Control Fanuc 18iM Super Cap II turning speeds 60-6000 U/min tool magazin: 60 tool taper BT50 total power requirement 26 kW weight of the machine ca. 23,6 t required space 6,3 x 3,3 x 3,8 m

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Kdsdpfohvml Iex Addjg Main Drive Motor Power 80 kW Weight aprox 40000 kg

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Technical specifications Measurement paths: X: 500mm Y: 600mm Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Kdodpfxjdyah So Addjg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h Kdedpfx Adsw Rl S Sedog X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.

Condition: used, Year of construction: 2000, x-travel 3.700 mm y-travel 3.050 mm z-travel 1.000 mm Control HEIDENHAIN TNC-430 PA distance between columns 2.300 mm 1.175 mm rapid travel x/y/z 25.000 mm/min feeds 15.000 mm/min tool taper ISO-50 - DIN 69871 table weight 20.000 Kg spindle drive 37 kW milling head -swivable +/- 45 ° milling head AB Achse 360.000 pos. Tools changer 30 fach/tools Kodswg Hrgopfx Addedg Chip coveyor Ink. Internal cooling system 20 bar table-size 4.000 x 1.800 mm weight of the machine ca. 42 t

Condition: ready for operation (used), Year of construction: 1978, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 2,066 rpm, table width: 1,000 mm, table length: 6,100 mm, overall weight: 19,000 kg, 3-axis Newall display with variable feed rate 50-speed head with continuously variable spindle speeds, max. 1,500 rpm Kdjdpovz Aydjfx Addeg 6100 x 1,000 mm table 4500 x 1,000 x 1,000 mm stroke 19-ton weight

Condition: good (used), Year of construction: 2009, feed length X-axis: 6,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 1,500 mm, controller model: HAIDENNAIN, workpiece length (max.): 6,000 mm, workpiece width (max.): 2,500 mm, table width: 6,000 mm, table length: 2,500 mm, Portal milling machine with 5-axis head Kdjdpfjvcqybex Addsg

Condition: used, Year of construction: 2000, Horizontal Boring Mill Manufacturer: TOS Model: VARNSDORF WHQ 13.8 CNC Year of manufacture: 2000 CNC control: Heidenhain 426 Completely overhauled in 2022 Report available Travel (X/Y/Z): 3,500 x 2,500 x 1,250 x B800 mm Number of axes: 5 Table length: 2,200 mm Table width: 1,800 mm Clamping area: 1,800 x 1,600 mm Table load: 12 t Number of tool stations: 60 Spindle taper: SK 50 Spindle diameter: 130 mm Spindle speed: 2,500 rpm Power: 90 kW Heidenhain handwheel Telescopic guard fully refurbished with new wipers. Dimensions (LxWxH) approx.: 7,500 x 6,950 x 4,000 mm Weight: 40 t Kodox A Ayiopfx Addedg 21126ä