Lead/traction spindle lathe

EMCO Maximat V 13

Condition: used, Year of construction: 1990, turning diameter over cross slide: 210 mm, spindle bore: 31 mm, turning diameter: 320 mm, center height: 165 mm, Machine can be tested under power, fully functional incl. accessories collet equipment is included Dujdewpkd Sepfx Abusn

Condition: new, Year of construction: 2025, High-class pallet jack with an accurate electronic scale and a load capacity of 2500 kg. It has double rollers made of polyurethane which ensures stable, quiet, long and trouble-free work. The pallet jack is designed to transport and control the weight of products in warehouses, shops, on construction sites or in delivery vehicles. Its reliability and lightweight design make it an indispensable helper in transporting loads up to 2500 kg. The SP2500 SUPER trolley is an ideal solution for logistics and warehouse workers weighing loads on a daily basis. Service departments often struggle with determining the weight for carriers. We met the needs with our modern model of a pallet truck with electronic scales. This is a solution that will significantly save time and facilitate internal transport. Machine characteristics: The trolley is equipped with exact scales, which allows you to weigh the load at any time. Swivel wheels and guide rollers covered are polyurethane which ensures light work, does not scratch or stain the surface. Pallet truck equipped with a hydraulic pump with a chrome-plated piston and a safety valve to prevent overloading the device. The model that we offer has the advantages of an ordinary pallet truck and is additionally characterized by an accurate weight. Djdpfevvkynex Abueun Large steering angle allows maneuvering in confined spaces. Weighing accuracy +/-0.5 kg, Accuracy level - III. Display and scale features: Backlit display Large letters/numbers displayed 6-digit display. Battery accumulator placed in a solid steel casing Charger included Specifications Maximum lifting capacity 2500 kg Distance between fork arms 570 mm Fork length 1150mm Fork width 170mm Length / Width / Height 1570x570x1205mm Weight 89 kg

Year of construction: 1988, condition: used, Voest Alpine DA 160 lathe year 1988 with three-jaw chuck , Multifix. , Ready for demonstration under power by arrangement. Dodpfxsma Snxe Abujun

Condition: new, TC 165 x 750V Illustration shows MIOTAL® TC 180 x 1000 Center distance: 750 mm Center height: 165 mm Swing diameter over bed: Ø 330 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. Chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 1/min Mechanical feed stages: 3 Duodpsir Igwjfx Abusn Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Face feeds X: (40) 0.022 - 0.98 mm/rev Metric thread: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 Gg/inch Thread module: (32) 0.4 - 7.0 Diametral thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner taper of quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Features: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with recirculating oil lubrication, precision bearing-mounted spindle, hardened and ground gears for long-lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric braking device (V models) - Torsion-resistant machine beds made of MEEHANITE quality casting, stress-free annealed and multi-ribbed for extremely smooth running - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Pulse button for main spindle - CE / IEC as well as German documentation and German service Basic equipment (standard accessories): - Machine stand with splash guard rear panel - 3-jaw lathe chuck - 4-fold steel holder - Foot pedal with mech. brake device - Coolant device - Chuck guard and spindle cover in accordance with European safety standards CE - 1 Fixed center point for main spindle - 1 Fixed center point MK3 - 1 Test report - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle Operating tool Available options for this lathe: - 3-axis digital readout - Quick-change holder system Multifix also available as a gearbox version

Condition: good (used), Year of construction: 1997, turning diameter over cross slide: 60 mm, spindle bore: 24 mm, spindle motor power: 7,500 W, rotational speed (min.): 30 rpm, rotational speed (max.): 5,000 rpm, total height: 1,660 mm, total length: 1,700 mm, total width: 1,240 mm, overall weight: 1,420 kg, Turning capacity Ø 200 mm, travel X/Z 180/400 mm, tools turret 8 places VDI 20 (16x16 mm), spindle 7,5 KW, 30 – 5000 rpm, spindle nose A2-4, chuck collet F38, bore Ø 32 mm, control FANUC Series T-20, manuals Djdpsvu Tvpjfx Abueun

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 838 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, spindle speed (min.): 50 rpm, quill travel distance: 127 mm, table width: 299 mm, table length: 1,245 mm, overall weight: 1,000 kg, input voltage: 400 V, warranty duration: 6 months, Rebuilt Bridgeport Milling Machine 2HP Variable Speed Fully Rebuilt Head And Machine Dedew Id U Hepfx Abueun Table has been reground on 3 Sides Bed ways have been reground and re scrapped in Brand New Lead Screws imperial X & Y & Z New Lead screw bushes imperial X, Y & Z Table Size 42” X 9” 50-4200rpm Brand New X Axis Powered Traverse Brand New Y Axis Powered Traverse Brand New 2 Axis Digital Readout ( X & Y Axis ) Brand New Coolant Pump & System Brand New LED Worklight Hand Pump Lubricated Ways ( Re piped) Reground R8 Spindle Taper Coolant Tray Power - 3 Phase 400v (original wiring & Motor Pre CE) Comes with a techno piu machine safety guard fitted as shown in the photo which is interlocked Fully Serviced Ready For Work Head has been fully stripped down and rebuilt new shafts, new bearings , belts & Super Precision Spindle Bearings Replaced Warranty Included

Condition: good (used), functionality: unexamined, machine/vehicle number: 10279, turning diameter over cross slide: 200 mm, spindle bore: 35 mm, turning diameter: 300 mm, center height: 150 mm, turning length: 750 mm, total length: 1,860 mm, total width: 700 mm, total height: 1,800 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 40 rpm, overall weight: 1,030 kg, - Operating voltage: 380 V Dujdev Irgtopfx Abujn - Connected load: 3 kW - Nominal current: 25 A - Frequency: 50 Hz Equipment: - Tailstock - Multifix type B tool holder - Three-jaw chuck (diameter: 160 mm) - 2-axis digital display from the manufacturer RSF

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, saw band length: 5,700 mm, saw band width: 41 mm, total height: 1,720 mm, total length: 2,600 mm, total width: 2,400 mm, feed length X-axis: 600 mm, cutting range round steel at 90°: 400 mm, cutting width (max.): 400 mm, table height: 700 mm, overall weight: 2,200 kg, cutting height (max.): 400 mm, Fully hydraulic high-performance bandsawing machine in extra heavy-duty design, with a horizontally and parallel moving saw band, for cutting profiles, pipes, and solid materials of all grades, including extremely hard-to-machine materials (e.g. titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide saw bands. Saw unit made of solid polymer concrete construction, ensuring maximum running smoothness and extended saw band life. Guidance of the saw unit via two vertical square columns (dual-column guide) with hardened and ground guideways. Hydraulic saw band tensioning and hydraulically preloaded carbide saw band guides. Material clamping via two horizontal frame clamping vises. Material feed through a non-driven roller conveyor integrated into the machine with twelve transport rollers, enabling easy transport of short remnants. Year of manufacture: 2004 Cutting range round: 400 mm Cutting range square: 400x400 mm Automatic material feed: 600 mm Multiple material feed: 99999 mm Cutting speed, stepless: 20-130 m/min Total drive power: 7 kW Saw motor power: 4 kW Clamping pressure reduction, steplessly adjustable Material support height: 700 mm Saw band dimensions: 5700x41x1.3 mm Shortest cut length in automatic operation: 6 mm Remnant length in automatic operation: 80 mm Voltage: 380V/50 Hz Dimensions LxWxH: 2600x2400x1720 mm Weight: 2200 kg Coolant system Full enclosure CNC control Idle time monitoring Dodpfjupvrxex Abujun Band tracking control Side guide rollers Height measuring system Light barrier

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: LZ280/3, turning diameter over cross slide: 190 mm, spindle bore: 43 mm, turning diameter: 330 mm, turning diameter over bed slide: 330 mm, center height: 165 mm, turning length: 670 mm, quill stroke: 90 mm, quill diameter: 45 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 30 rpm, GDW precision lathe LZ 330 V EconomyLine The LZ 330 V EconomyLine is a powerful lead and feed spindle lathe with stepless speed control from 30–4000 rpm. The standard paint finish includes RAL 7035 (light gray) for the housing and RAL 7016 (anthracite gray) for the substructure, splash guard hood and chuck guard. Equipment & accessories: ✅ 3-axis position indicator with 6" color display ✅ Quick-change tool holder Multifix A including 1 turning tool holder ✅ Coolant system & central lubrication ✅ Chip tray, splash guard & spindle brake ✅ LED machine light & collet board K32 ✅ Electromechanical limit switch device for thread/feed Dedpjv Dan Dsfx Abueun ✅ Tool cabinet with telescopic extension including operating tools Additional equipment package (optional): ➕ Three-jaw chuck Ø 160 mm (up to 4,600 rpm) ➕ Keyless drill chuck (3-16 mm, B16/MK3) ➕ Live center MK3 & drill bit holder ➕ 4 additional turning tool holders & 1 drill bit holder 📦 Delivery: ✔️ Disposable packaging & safe transport including insurance Perfect for precise and demanding turning operations in industry and trade! 🚀

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,000 h, spindle speed (max.): 2,500 rpm, overall weight: 1,800 kg, This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional pull and lead screw, infinitely variable speed adjustment, and a digital display. Key specifications include a turning diameter of 400mm, center height of 195mm, and a bed width of 1270mm. It also comes equipped with a MultiFix quick-change tool holder, maximum spindle speed of 2500rpm, and a motor power of 7.5kW. Weight is 1,800kg. Contact us for more information about this machine. • Control: Conventional with lead screw and infinitely variable speed adjustment • Readouts: Digital display for axes and digital spindle speed display • Operating hours: No counter; estimated 5,000–7,000 h • Turning diameter: 400 mm • Center height: 195 mm • Bed width: 1270 mm • Toolpost: MultiFix quick-change tool holder Additional equipment • 3x three-jaw chucks • 3 sets of claw jaws • Chuck wrench • Manual/operating instructions • Work area lamp • Digital dial indicator • 4 MultiFix tool holders • Various turning tools • Drill chuck (keyless) for tailstock • Coolant pump Dusdpfx Ajx D Nwdsbuen