Injection molding machine

ENGEL duo 5550/650 pico

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Hfjdpfjyw Aa Ujx Af Tof Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Hfjdperkgy Ujfx Af Tof

Condition: excellent (used), Year of construction: 2011, Injection Moulding Machine: ENGEL DUO 5550/650 pico Control System: CC200 Year of manufacture: 2011 Operating hours: 61,606 h 1. Clamping Unit Clamping force: 6,500 kN Tie bar clearance (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Max. daylight between platens: 2,050 mm Max. mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm Max. injection volume: 2,740 cm³ Max. shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar L/D ratio: 20 Screw stroke: 430 mm Max. screw speed: 148 rpm Plasticising capacity: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Cylinder heater power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: - 4 pcs. (installed on the fixed platen) 5. General Specification Two-platen machine (DUO series) designed for the production of large plastic parts. The design ensures high rigidity of the clamping system and allows operation with heavy moulds while maintaining a large opening stroke. Hodpfx Ajywrtwsf Tjff The CC200 control unit enables precise process parameter control and integration with automation systems and peripherals. If you wish, I can also prepare: - a sales offer version (more marketing-oriented), - translation into German or English, - or a market value assessment of this machine.

Condition: excellent (used), Year of construction: 2011, Clamping force: 650 t Screw diameter: 90 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 2740 cm3 Type: Horizontal Drive: Hydraulic VIPER 40 Linear robot available The machine has approximately 61,600 operating hours. Hfsdjyfh I Ejpfx Af Tsf 6 core pulls on the moving platen, 2 cores and 4 cascade valves on the fixed platen.

Year of construction: 2011, condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm Hsdpfxoh Di H Ds Af Tjff -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm -Weight 640 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, Manufacturer: HABERMEHL Anlagenbau GmbH Address: Hauptstr.1, 35510 Butzbach-Ebersgöns, Germany Type: EH 400/1 Serial number: 901 Hfjdpfjw Niuhjx Af Tof Year of manufacture: 2004 Voltage / Frequency: 400 V / 50 Hz Rated power: 3 kW CE-certified: Yes 🛠️ Device Description Industrial shredder or crusher (Shredder/Granulator). Notable features visible in the photos: - System with rotating knives (shredding unit) on a 2 mm shaft - 3 kW SEW motor and reduction gearbox - 8 mm screen (the screen is labeled “8 mm Sieb”) – determines the output particle size - Rollable, portable design - Material discharge container and lower motor drive system Machines of this type are typically used for shredding the following materials: - Plastics - Rubber - Wood - Light metal chips - Electronic scrap 📝 Technical information you should request If you require further details, you may request the following information from the supplier or manufacturer:

Condition: excellent (used), Year of construction: 2011, Prima Industrie Platino 1530 laser cutting machine only 4300 hours cutting hours Hodpfx Ajivg Hgef Toff This Prima Industrie Platino 1530 laser cutting machine 4,0kW CO2 was manufactured in Italy in the year 2011 and installed at the end of 12/2011. PRIMACH 20 L control unit.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 Hodpfxoud N Hde Af Teff ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm z-travel: 510 mm control: 3D Heidenhain i TNC 530 Hfedsw A I Uuspfx Af Tsf table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. tool changer with: 20 place spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Weight approx.: 3,6 t tool taper: SK 40 range of revolution per miute: 20-10.000 U/min Tool changer: 20-fach dimension machine xH: 3,0 x 2,0 x 2,15 m

Condition: good (used), Year of construction: 2015, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, 1 Horizontal machining center Make: STARRAG HECKERT, type: HEC 400D, year 2015, Control system, Siemens, type Sinumerik 840D, travel X/Y/Z = 650 x 650 x 650 mm, 2-fold pallet changer, pallet size 400 x 400 mm, NC rotary table 360x 0.001°, 80-fold tool changer, HSK 63 tool holder, spindle speed 15,000 rpm, IKZ 50 bar, belt filter, coolant temperature control, spindle cooling, chip conveyor, sound and control cabinets, operating hours Hfedpeuav H Nofx Af Tef 43,698, spindle hours 5,401