ES 2550/500 KG

ENGEL

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,029 h, functionality: fully functional, machine/vehicle number: 51561, clamping force: 2,300 kN, screw diameter: 135 mm, injection pressure: 1,600 bar, opening stroke: 3,800 mm, tool height: 1,890 mm, TECHNICAL DETAILS Dsdpfxsy T Hx Hs Alzsch Clamping force: 2,300 kN Platen size (H x V): 2,900 x 2,500 mm Tie bar distance (H x V): 2,000 x 1,600 mm Minimum/maximum mould height: 700 mm/1,890 mm Maximum opening stroke: 3,800 mm INJECTION UNIT Screw diameter: 135 mm Shot volume: 8,870 cm³ Shot weight (PS): 8,071 g Injection pressure: 1,600 bar MACHINE DETAILS Net weight (with control cabinet): 113 t + 18 t Operating hours: 70,029 h

Condition: excellent (used), Year of construction: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with robot Clamping unit Parameter Value Clamping force 8,000 kN Platen dimensions (W × H) 1,620 × 1,500 mm Tie bar spacing (W × H) 1,120 × 1,000 mm Min. / Max. mould height 500 – 1,050 mm Maximum distance between platens 2,080 mm Mould opening stroke 1,030 mm Ejector stroke 350 mm Ejector force 139 kN Maximum mould weight 7,200 kg Dsdjwy U E Uopfx Alzsch Injection unit Parameter Value Screw diameter 130 mm Injection volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio (screw length/diameter) 20 Electrical-hydraulic equipment Parameter Value Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Dimensions and weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (auxiliary equipment)

Condition: ready for operation (used), Year of construction: 2011, operating hours: 61,666 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 90 mm, column diameter: 175 mm, injection weight: 2,520 g, opening stroke: 1,400 mm, The machine is in excellent condition; all hydraulic hoses were replaced in the fourth quarter of 2024! TECHNICAL DETAILS Clamping force: 6,500 kN Column spacing (H x V): 1,100 x 960 mm Platen size (H x V): 1,510 x 1,440 mm Tool height (min./max.): 650 / 1,150 mm Opening stroke: 1,400 mm Maximum distance between platens: 2,050 mm Maximum tool weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit (unit 5550) Screw diameter: 90 mm Maximum shot volume: 2,740 cm³ Djdpfxoy T Hfyj Alzjch Maximum shot weight (PS): 2,520 g Injection pressure (max./increased): 2,180 bar Injection pressure (standard): 1,910 bar L/D ratio of the screw: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticizing volume: 77 g/s Nozzle closing force: 150 kN MACHINE DETAILS Control: CC200 Drive and Supply Installed drive power: 90 kW Cylinder heating power: 56 kW Number of heating zones: 6 Hydraulic tank capacity: 1,000 l Installed drive power: 90 kW Operating hours: 61,606 h EQUIPMENT Robot: Viper 40 Key features: 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (mounted on the fixed platen)

Condition: like new (used), Year of construction: 2021, clamping force: 6,500 kN, Equipment: documentation/manual, ENGEL DUO 3660/700 ecodrive (2021) M017 Dcsdezb H Enspfx Alzeh CLAMPING UNIT • Clamping force: 700 T • Coining: NO • Max mold weight: 11000 kg • Max mold weight per plate: 7300 kg • Size between bars (WxH): 1100x960 mm • Min mold height: 450 mm • Max mold height: 950 mm • Max stroke open: 1850 mm • Centering ring FIX / MOVE: 160 / 200 mm • Fast clamping system: NO MOLD INTERFACE • Heating zones: 16 (16 pin TC, 16 pin PW) • Water cooling circuits: 12+12 • Hydraulic circuits (cores): 2+2 • Hot runner sliders hydraulic (nozzles): 8 • Hot runner sliders pneumatic: 4 INJECTION UNIT • Screw diameter: 70 mm • Nozzle face + thread: R??+M36x2,0 • Injection unit type: 3660 • Screw stroke: 360 mm • Max injection capacity: 1385.44 cm³ • Max injection pressure: 2300 Bar • Max injection rate: 296 cm³/s • Accumulator SW / HW: NO / NO ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: YES • Sockets 400V/16A: 6 • Sockets 400V/32A: 12 • Sockets 400V/63A: 0 • Robot type: Linear • Vacuum ports: 6 • Air pressure ports: 6 • User inputs / outputs: 16 / 16

Condition: like new (used), Year of construction: 2003, For sale complet MC 4 control for Krauss-Maffei machines, tested and full in function ! Dcsdpoikfmhsfx Alzjh

Condition: used, Year of construction: 2014, Clamping force: 600 t Screw diameter: 60 mm Distance between tie bars V: 910 mm Distance between tie bars H: 1030 mm Shot volume: 710 cm3 Type: Horizontal Drive: Hydraulic Cores 2 + 2 Dcjdpfx Alozb E Dpjzjh \+ Robot Viper 40

Condition: ready for operation (used), Year of construction: 1999, operating hours: 91,191 h, clamping force: 25,000 kN, screw diameter: 150 mm, controller manufacturer: ENGEL, This ENGEL ES 23050/2500 DUO Injection moulding machine was manufactured in the year 1999 and has 91191 production hours. It is equipped with an Engel control unit. The machine has a clamping force of 25000 kN, is in good condition and well maintained. Machine Benefits Qualitative Machine Benefits • The machine is in very good condition, with all the minor maintenances done by internal service and the most important ones done directly by engel. Technical Machine Benefits • Opening power: 1600 kn • Opening lenght: 3100 mm • Diameter of the columns: 360 mm • Dosing lenght: 720 mm • Max injected volume: 12725 cm2 • Rotational speed of the screw: 85 rpm • Specific injection pressure: 1410 bar • Heating potence: 120 kw • Heat zones: 7 Important note: Dcsdpfozb Emqox Alzjh The robot is not included in the price. Please inquire separately for the robot price as an extra option.

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 862-1053, Plastic Injection Moulding Machine | Mannesmann DEMAG - Ergotech 5000-2300 Clamping force [kN]: 5,000 Number of components: 1 Clamping platen width [mm]: 1,300 Clamping platen height [mm]: 1,200 Clear tie bar spacing, horizontal [mm]: 900 Clear tie bar spacing, vertical [mm]: 800 Centering ring diameter [mm]: 200 Minimum mould installation height [mm]: 400 Maximum mould installation height [mm]: 880 Maximum opening stroke [mm]: 810 Dcodpjygikwofx Alzeh Maximum ejector stroke [mm]: 230 Thread [M]: 24 Maximum mould weight [kg]: 6,700 Maximum mould weight, moving side [kg]: 4,400 Screw diameter [mm]: EE1: 60 Maximum shot weight [g] PS: EE1: 800 Injection unit configuration: EE1: horizontal Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Loaded free on truck (Butzbach). #Tags: Mannesmann-DEMAG | Ergotec | Ergotech5000

Condition: ready for operation (used), Engel GNM 5440 motor 24 V SN:J33134 ,used, normal traces of use, 100% functional, scope of delivery according to photos Dodpsi D Hvbofx Alzech

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine As shown in the pictures, its working condition is uncertain. Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Manufacturer: Engel Dodpfx Aeukn S Holzsch Type: ES 330/85 Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Condition: like new (used), Year of construction: 2007, operating hours: 27,000 h, clamping force: 6,500 kN, KraussMaffei KM650-3500 C2 injection molding machine for sale. The machine is in very good condition. It has only been operated in single-shift production and used exclusively for small batch and sample production. Dcodpfx Ajyn Sc Eelzoh A new hydraulic pump was recently installed (approx. 300 operating hours ago). - 27,000 operating hours - Year of manufacture: 2007 - MC4 control system - Core pulls on both sides - Tie bars and guideways are undamaged and in like-new condition - Robot with longitudinal take-out LR300 and conveyor belt - Proportional valves, HPS screw, bimetallic cylinder - Total weight approx. 30,000 kg - Opening stroke: 1,150 mm Adapter plates are also available from us. Inspection under power is possible. Other accessories such as Motan dryer, chiller unit, and much more available upon request. The machine can be dismantled and loaded by us upon agreement. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2014, clamping force: 7,000 kN, Equipment: documentation/manual, Clamping force: 700 t Dcodpszblkiefx Alzjh Screw diameter: 55 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 710 cm3 Type: Horizontal Drive: Hydraulic Core pullers 2 + 2 \+ Robot Viper 40

Condition: excellent (used), Year of construction: 2016, clamping force: 6,500 kN, Equipment: documentation/manual, ENGEL DUO 2050 / 600* (2016) 🔧 *M006 CLAMPING UNIT • Clamping force: 600 T • Coining: NO • Max mold weight: 9500 kg • Max mold weight per plate: 6300 kg • Size between bars (WxH): 1030x910 mm • Min mold height: 400 mm • Max mold height: 950 mm • Max stroke open: 1750 mm • Centering ring FIX / MOVE: 160 / 160 mm • Fast clamping system: YES → Dimension: 560x560 mm → Cylinder diameter: 70 mm MOLD INTERFACE • Heating zones: 32 (16 pin TC, 16 pin PW) • Water cooling circuits: 6+6 • Hydraulic circuits (cores): 2+2 • Hot runner sliders hydraulic (nozzles): 6 • Hot runner sliders pneumatic: 8 INJECTION UNIT • Screw diameter: 60 mm • Nozzle face + thread: R20+UNF 7/8" • Injection unit type: 2050 Dcsdpfx Alozbdcwszsh • Screw stroke: 300 mm • Max injection capacity: 848.23 cm³ • Max injection pressure: 2400 Bar • Max injection rate: 705 cm³/s • Accumulator SW / HW: YES / YES ELECTRICAL / ROBOT • Mold ejector clamp: YES • Sockets 400V/16A: 3 • Sockets 400V/32A: 7 • Sockets 400V/63A: 1 • Robot type: Linear • Vacuum ports: 4 • Air pressure ports: 6 • User inputs / outputs: 18 / 16

Condition: ready for operation (used), Year of construction: 2010, operating hours: 60,159 h, clamping force: 5,000 kN, screw diameter: 90 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. It features a clamping force of 5000 kN and a maximum shot weight of 2084 g, making it suitable for high-quality injection molding applications. With a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine offers robust performance. Consider the opportunity to buy this Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Contact us for further details. • Clamping unit • Tool weight: DS 3950 kg / AS 5260 kg (total 7900 kg) • Min. tool diameter: 560 mm • Opening stroke: 1170 mm • Tool installation height: min 480 mm; max – Dcodpfx Ajyg Hz Holzoh • Max plate spacing: 1650 mm • Mounting plates (H × V): 1270 × 1200 mm • Clear column spacing: H 900 mm / V 800 mm • Centering ring diameter: 200 mm • Ejector • Stroke: 250 mm • Ejection force: 95.4 kN • Retraction force: 48.6 kN • Pneumatic ejector: yes • Core pulls / controls • Core pull control: 2 (AS) + 2 (DS) • Closing nozzle: 2 hydraulic / 0 pneumatic • Process control (SPC): yes (Kistler, p=2 / t=0) • Printer interface: no / 12-port USB • Hot runner control: no • Injection unit 1 • L/D ratio: 20 • Screw diameter: 90 mm • Max. stroke volume: 2290 cm³ • Max. shot weight (PS): 2084 g • Injection pressure: 1839 bar • Plasticizing rate: 185.8 g/s • Screw speed: 270 rpm • Nozzle bore: 6 mm • Pump power / Heating power: 90 kW / 44 kW • Other • Max. crane load: 10 tons • 2K-capable: no • Filter nozzle/mill: no • It is a standard fully hydraulic 2-plate clamping system with fully hydraulic screw drive and constant motor. • Operating hours: 60,159 h Additional equipment • Linear robot: KRC6-2 ARC-C • Axes: X/Y (standard), Z present

Condition: excellent (used), Year of construction: 2016, clamping force: 6,500 kN, Equipment: documentation/manual, Clamping force: 700 t Screw diameter: 60 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 705 cm3 Djdpfx Alozbdb Hezech Type: Horizontal Drive: Hydraulic Hydraulic cores 2 + 2 \+ 6 AXIS robot arm (KUKA)