HYDRAULIC PRESS

EXNER

Condition: used, Year of construction: 1991, pressure 150 t distance between columns 300 mm stroke 180 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 570x180 / 300x410 mm table height over floor 875 mm side window 180 mm ram surface 180 mm speed down 250 mm/s speed up 160 mm/s working speed 6 - 12 mm/s oil volume 250 l power requirement 11,0 kW weight 2,4 t dimensions (WxDxH) 1,3 x 1,3 x 2,4 m year of manufacture 1972 - overhaul 1991 permitted for manual loading according to the German Safety Regulations (UVV §20) with oil-hydraulic drive No foundation pit necessary as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request Gtodevuuiwopfx Abvsw

Condition: excellent (used), CNC Lathe with y-axis DMG MORI - CTX BETA 800 4A MACH-ID 9282 Make: DMG MORI Type: CTX BETA 800 4A Gsdpfx Aexuqw Hobvotw Control: Siemens 840 D-SL Year: 2012 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Slightly used! Godpfjyizgijx Abvetw

Condition: new, Year of construction: 2026, functionality: fully functional, installation height: 500 mm, pressing force: 160 t, table width: 1,250 mm, table length: 800 mm, stroke length: 300 mm, EXNER EX SL 160 double column press NEW Machine is under construction Pressing force 1600 kN Installation height: 500 mm stroke: 300 mm Table width: 1250 mm Table depth: 800 mm Gsdjuw S A Djpfx Abvstw mech. depth stop

Condition: used, Year of construction: 1965, honing diameter 80 mm Gjdpfxjt Hwupj Abvjtw stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.

Year of construction: 1989, condition: ready for operation (used), Drive power: 23kW, pressing force: 800kN, overrun distance: 25mm, overrun time: 93ms, safety distance: 148mm, oil capacity: 650l, weight: approx. 7000kg. Includes a Sick safety light curtain. An on-site inspection is possible. Gtjdpfx Abew Na E Rovsw

Condition: used, Year of construction: 2000, pressure 25 t stroke 150 mm throat 420 mm dayligth 450 mm table surface area 700 x 820 mm table height over floor 850 mm ram surface 600 x 600 mm feed down 370 mm/s feed up 370 mm/s working feed 18 - 33 mm/s oil volume 300 l power requirement 5,5 kW Weight 5,8 t Gsdpfxsvut N Ns Abvetw dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: refurbished (used), Pressure: 150t Length of Stroke: 140mm Gsdpogd H Tpofx Abvotw Table size: 510x530mm

Condition: used, Year of construction: 1970, pressure 40 t stroke 150 mm serial number 100091 2 Druck & Hub verstellbar Gjdpovxltbjfx Abvotw pressure 25 t weight je 1,5 t safety light frame ja bei beiden

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 10131, Manufacturer: Maschinenfabrik Exner GmbH & Co. KG Type: EEX 300 SB-ZR Machine No.: 10131 Year of manufacture: 1989 Pressing force: 3,000 kN (300 t) Drive power: 80 kW Overrun distance: 36 mm Overrun time: 103 ms Hydraulic oil capacity: approx. 2,400 liters Total weight: approx. 47 tons Gsdpfswr Um Ajx Abvotw Condition: Untested Location: 59227, Ahlen

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Gtodjrunu Iepfx Abvsw

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 2269, total height: 2,700 mm, table height: 900 mm, installation height: 300 mm, total width: 1,500 mm, total length: 1,700 mm, pressing force: 80 t, table width: 400 mm, table length: 400 mm, operating speed: 300 mm/s, overall weight: 2,600 kg, reverse speed: 180 mm/s, distance table to ram: 300 mm, type of input current: three-phase, stroke length: 180 mm, oil tank capacity: 200 l, input voltage: 400 V, pressing speed: 15 mm/s, Equipment: documentation/manual, safety light barrier, The press was retrofitted in 2010 in accordance with the latest safety regulations. Gtedpfx Asxyx Abjbvow

Condition: new, Year of construction: 2025, functionality: fully functional, table width: 850 mm, table length: 570 mm, total width: 1,265 mm, overall weight: 5,500 kg, pressing force: 60 t, C-frame eccentric press 60 t. NEW Press force: 60 t Rated capacity point: 4 mm Max. closed die height: 310 mm Stroke adjustment (semi-automatic): 20/100 mm Speed: 60 SPM Gsdpfx Ajxtpltjbvstw Die fastening hole diameter: 50 mm Throat depth (centre of hole to back): 275 mm Ram stroke adjustment: 80 mm Ram dimensions: 580 x 350 mm Table dimensions: 850 x 570 mm Table hole diameter: 150 mm Table height above floor: 795 mm Weight approx. 5,000 kg Height: 2,430 mm Depth: 1,370 mm Width: 1,265 mm Motor: 5.5 kW

Year of construction: 2023, condition: as good as new (ex-display), Up-stroke construction pressing force 300 kN pressing surface 300 x 300 mm specific force 3,3 N/mm² opening 200 mm heating platen as solid steel plate electrical heated up to 300°C (570 °F) Gtjdpfx Abjkuz T Ujvew control Siemens S7-1200 with 12" Touchpanel mechanical safety door data collection

Condition: new, Year of construction: 2025, functionality: fully functional, installation height: 400 mm, throat depth: 230 mm, pressing force: 40 t, table width: 700 mm, table length: 450 mm, stroke length: 250 mm, NEW EXNER C-frame press EEX SLL 40 Standard Line LIGHT Year of manufacture: 2025 Pressing force: 400 kN Installation height: 400/450 mm Stroke: 250 mm Gedpfx Aew Nx Nhsbvstw Table (width): 700 mm Table (depth): 450 mm Throat depth: 230 mm