Straightening Press - Single Column

FRITZ MUELLER CR 40.1.11

Condition: new, Year of construction: 2025, Semi-automatic sawing process with automatic clamping, sawing, and raising of the workpiece to preset height after the cut is finished Stepless hydraulic cutting pressure and feed monitoring at the saw band press. Therefore, optimal conditions for every sawing task, i.e., constant pressure for solid material and constant feed for thin-walled profiles. Particularly suitable for universal application with different cross-sections, materials, and frequently changing miter cuts The machine control complies with CE standard 89/289 Technical data: round/flat 90° 325/500 x 300 45° 300/300 x 300 30° 200/200 x 200 Rapid feed lowering of the saw frame to the material edge by push button Manual miter adjustment from 90° - 30°, infinitely variable on a scale The miter pivot point is the intersection between the saw band and the fixed clamping jaw, resulting in no length change when adjusting the angle Hydraulic full-stroke workpiece clamping - CETOP hydraulic system At every saw frame angle, the material is clamped parallel at 90° Complete coolant device with electric immersion pump Central machine operation Saw band drive with end stop Movable band guide arm, adjustable to material width Saw band deflection roller with carbide guide Chip cleaning brush, rotating Saw band tensioning with torque wrench Painting silver-grey/blue-grey (RAL 7001/RAL 7031) Remnant length: 25mm Cutting speed: AC frequency-controlled drive 15-150 m/min continuously adjustable at the control panel Drive Saw band 3.0 kW; 400V, 50Hz Hydraulics 1.1 kW Coolant pump 0.1 kW Saw frame feed: Continuously up to 300mm/min, hydraulically controlled Saw band tension: Mechanically with torque wrench Saw band dimensions: 4200x34x1.1mm Working height: 750mm (without base elements) Weight: 850kg Dwsdpfxehppabo Adajd Dimensions (LxWxH): 1300x2050x1400mm The following options are available: Laser light Micro-spraying device Clamping pressure regulator Support table on the feed side

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: fortlaufend, Height: 200 mm Centers: 1000 mm Turning diameter over bed: 400 mm Turning diameter over support 220 mm Spindle Bore: 52 mm Speed ​​range: 9-1600 rpm Spindle nose: Bayonet DIN 5027 KK 6 Longitudinal feeds range: 0.028 to 6.43 mm / rev (93 steps) Area cross feeds: 0.012 -2.73 mm / rev (93 steps) Metric threads: 0.5 - 224 (48 steps) Inch threads: 72 - 1 / 8 tpi (46 steps) Module pitch: 0.5 - 112 (42 steps) Diametral thread: 56 - 1 / 4 DP Quill diameter: 75 mm Spindle stroke: 150 mm Taper: Morse taper 5 Motor power: 7.5 kW Weight: 2100 kg Dimensions: 2672 x 975 x 1230 mm Accessories: Digital display for 3-axis mark SINO, 3-jaw chuck Ø 250 mm, 4-jaw faceplate chuck Ø 400 mm, fixed + follow rest, coolant system, fire wall, rapid, manual lubrication, 4-way tool operating light. Dedpfx Aj Nh Hxsdaewd

Condition: used, machine/vehicle number: 51568, pressure:100 t stroke:0-500 mm table surface area:800 x 650 mm ram surface:800 x 600 mm hole in the table:355 mm Dedpfjcxxrrox Adaewd table height over floor:800 mm dayligth:1130 mm weight of the machine ca.:5,7 t throat:310 mm space requirements approx. LxWxH:1,2 x 2,0 x 3,67 m

Condition: new, Year of construction: 2021, Press brake Bernardo AKPL 1600 x 40 Technical data: Pressure force: 40 to bending length: 1600 mm distance between stand:1200mm stroke length: 100 mm Backgauge: 0 - 500 mm Projection: 200 mm table width: 150 mm Djdpfx Adjftuyweajwd table height: 760 mm Forward speed: 60 mm/sec Bending speed: 8 mm/sec Return speed: 60 mm/sec. oil tank: 130 litres Engine power: 4,0 kW width: 2050 mm depth: 1800mm height: 2030mm Weight ca.3030 kg

Condition: used, machine/vehicle number: 632/6, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm Dwodocxxycjpfx Adaod table-size:480 x 450 mm Bruderer Double Roll Precision Feed:links stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm dimensions of the machine ca.:2,10 x 1,65 x 0,75 m with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: refurbished (used), Pressure: 150t Length of Stroke: 140mm Table size: 510x530mm Dwedpfxegd H Tpo Adasd

Condition: good (used), Year of construction: 2008, 1 used surface grinding machine Manufacturer: Elb Type: Smart NG STC SN: 511210608 Control: Siemens, type: Simatic Multipanel Touch Magnetic clamping table, 400 x 600 mm Hydraulic table drive, table speed 2 - 30 m/min Table load on magnetic plate: 400 kg Grinding area (L/W/H): 600 x 400 x 475 mm Grinding wheel dimensions: 300 x 50 x 76.2 mm Dedpfov T Rhasx Adaewd Grinding spindle output: 4.3 kW Grinding spindle taper: 36 mm Max. vertical travel: 475 mm Max. transverse travel: 370 mm Machine weight: 3,800 kg Machine dimensions: L/W/H 2,750 x 2,050 x 2,150 mm, Electronic handwheel for Y/Z axis, Dressing unit with dressing compensation/diamond dressing, height adjustable by 22 mm, Wet grinding unit with 50 l cooling pump, 60 l automatic paper belt filter, Distance measurement in the Y/Z axis via rotary encoder

Condition: new, Year of construction: 2025, Top height 250 mm Spindle bore 82 mm Distance between Center 2000 mm Circumference diameter over bed 500 mm Dedpfx Asd I A Ausdaewd Circumference diameter in the crank 710 mm Circumference diameter over support 300 mm Speed range 9 - 1600 rpm (24 steps) Spindle nose DIN 55029 Camlock D1-8 Range of longitudinal feeds 0,028 - 6,43 mm / rev; 93 steps Range of feed rates 0,012 - 2,73 mm / rev. 93 steps Metric threads 0.5 - 224 mm; 48 steps Inch thread 72 - 1/8 gear / inch; 49 steps Module thread 0.5 - 112 mm; 42 steps Diametrical thread 56 - 1/4 DP; 42 steps Quill ø 75 mm Pinolenweg 150 mm Quill holder Morse cone 5 Motor power 7.5 kW Weight 2,950.00 kg Dimensions 3132 x 975 x 1270 mm

Condition: new, Year of construction: 2025, The ERBA Turbo 60 is a centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet configuration). The turntable speed can be adjusted via a frequency converter. The Turbo 60 is available in both dry and wet configurations and can be ideally linked with the ERBA YE-60 separation unit shown in the images. Technical data: - Gross volume: 60 liters - Drive power: 3.0 kW - Turntable speed: 75 to 300 rpm - Optional equipment: tilting motor, soundproof cover, or separation box All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may depict the machine with optional accessories, which are available separately and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). As an initial step, we will send you a non-binding offer, which will also provide details of our general terms and conditions with legal notice and your right of withdrawal before a purchase/contract is concluded. Dwjdpfon Ut Ilsx Adajd

Condition: used, Year of construction: 1985, table length 1.000 mm table width 800 mm weight of the machine ca. 5 t dimensions of the machine ca. 2900 x 1800 x 3300 m +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Dwodpshc Uzcofx Adaed Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++