Toggle press

GECHTER 8/12 HMS HKPV

Condition: used, turning length 600 mm turning diameter over bed 360 mm turning diameter over slide rest 190 mm bed width 295 mm number of spindle speeds 45 - 2240 U/min. spindle bore 33,0 mm tailstock quill taper MT MK 3 feed Längs 0,02-0,8 mm/U feed Quer 0,0125-0,5 mm/U total power requirement 5,5 kW weight of the machine ca. 1900 kg range L-W-H 2050 x 950 x 1280 mm Refurbished and repainted in 2013 Kdodpfxoxaamuj Agnjl Costs around 16.000 euros Furnishing: - WNW NILES 3-jaw chuck Ø 200 mm - Multifix steel holder size B with inserts - revolving center points - chuck key - Movable tailstock - Operation manual

Condition: good (used), Year of construction: 2010, operating hours: 33,600 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: Siemens, controller model: Siemens 810D / ShopMill, table width: 560 mm, table length: 1,200 mm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 11,000 h, Equipment: chip conveyor, Internal coolant supply (IKZ) Control cabinet cooling: Rittal SK 33023.100 Tool magazine: 20 positions Kodpfx Agoyua Sbonedl

Condition: used, functionality: fully functional, Year of construction: 2018, This offer includes a complete industrial laser marking system from the TRUMPF TruMark series – comprising a TruMark 5000 laser source and a TruMark 5020 control/power supply unit. The TruMark series is known for precise, permanent, high-contrast marking on a wide variety of materials in industrial environments. Both devices are equipped with original TRUMPF type plates and are in well-maintained used condition. Ksdpfx Agoxxp Eqonjdl Technical Data TruMark 5020 – Control / Power Supply Unit Model: TruMark 5020 Mains connection: 100–240 V, 50/60 Hz Current consumption: 7 A Power: 600 W Protection rating: IP54 Serial number: L1150E2020 Year of manufacture: March 2018 Certification: CE, 21 CFR Chapter 1, Subchapter J TruMark 5000 – Laser Source Model: TruMark 5000 Serial number: 0N510-2779-02 Wavelength: 1040–1200 nm Average output power (Po): ≤ 120 W Pulse power (Pp): ≤ 50 kW Pulse duration (t): ≥ 1 ns Frequency range (F): ≤ 1000 kHz Standard: IEC 60825-1:2014 (Laser Safety)

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 Ksdpfsyzd I Usx Agnjdl -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Condition: used, Year of construction: 1983, pressure 120/15 t distance between columns 860 mm stroke 170 mm table-size 860 x 600 mm dayligth 350 mm max. distance table - ram 520 mm ram head dimension 860 x 600 mm hole in the table 200 x 140 mm Kedpfxoym Dz De Agnjdl table height over floor 850 mm total power requirement 25 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 2,3 x 1,7 x 3,4 m Maximum ram pressure: 120 kN Maximum pull-out pressure: 15 kN Sick light curtain Safety distance: 180 mm Maximum overrun: 15 mm

Condition: used, Year of construction: 1992, functionality: fully functional, stroke length: 200 mm, retraction force: 10 t, overall weight: 5,700 kg, operating pressure: 250 bar, installation height: 450 mm, pressure: 250 bar, We offer this used Lauffer RPT100 hydraulic press, year of manufacture 1992. Machine type: RPT100 Machine no.: 14161 Year of manufacture: 1992 Weight: 5,700 kg Maximum pressing force top ram: 1,000 kN Maximum pressing force bottom ram: 100 kN Retraction force top ram: 100 kN Retraction force bottom ram: kN Maximum stroke top ram: 200 mm Maximum stroke bottom ram: 80 mm Maximum operating pressure: 250 bar Shut height: 450 mm Overrun stroke: 20 mm Overrun time: 84 ms Safety distance: 134 mm For sale is a hydraulic high-speed press from the quality manufacturer Maschinenfabrik LAUFFER GmbH & Co. KG. Ksdpjywiyuefx Agnsdl Technical specifications: Manufacturer: LAUFFER Designation: Hydraulic high-speed press / hydraulic down-stroke press Type: RPT 100 Year of manufacture: 1992 Factory no.: 14161 Pressing force: 1,000 kN (≈ 100 t) Operating pressure: 270 bar Stroke (ram): 307 mm Clamping area / table: 710 × 450 mm Clearance: 710 × 560 mm Distance from clamping area to ram: 450 mm Column spacing (according to card): 830 mm (width) / 280 mm (length side) Power requirement: 15 kW Pump delivery rate: 30 l/min Speed: 1,500 rpm Oil capacity: approx. 450 l Oil type: HLP 46 (DIN 51525) Condition / Inspection: Used machine from industrial stock. Inspection and collection by arrangement. Collection/logistics: Loading by crane included.

Condition: used, Year of construction: 2022, operating hours: 488 h, fuel type: diesel, color: other, Equipment: all wheel drive, Year of manufacture: 2022 GVW: 4.170 kg Dimensions (LxBxH): 376 x 179 x 258 cm Make of engine: Kubota Lifting capacity: 480 kg Working height: 970 cm CE mark: yes Technical condition: very good Ksdpjykag Dsfx Agnsdl Visual appearance: good