Eccentric press for 2-hand working

Gustav Wolff EPV 32 RKZ

Condition: ready for operation (used), Year of construction: 2014, Machine equipped with 25 mm 3 hook knives 2 pieces planetary gearboxes with 15 KW power each and a control system with PLC and overload/reverse operation. Tedpfjiwgd Ssx Adljf

Year of construction: 2002, condition: used, pressure 63 t throat 315 mm stroke 8-100 mm no. of strokes 140 Hub/min ram - range of adjustment 63 mm table surface area 1200x630 mm ram surface 800x315 mm hole in the table Ø 110 mm table height 820 mm Tsdpfslp U D Tsx Adlsf tool hole in ram Ø 50 mm dayligth 335 mm total power requirement 7,5 kW weight of the machine ca. 5 t

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm Tedpfx Adjfx Hv Hjlsf clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: ready for operation (used), Year of construction: 1984, Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg. Tedpfx Aor A Eifodljf

Condition: used, Year of construction: 2001, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, nominal power (apparent): 17 kVA, torque: 82 Nm, controller manufacturer: Heidenhain, controller model: Mill Plus, total height: 2,450 mm, total length: 4,000 mm, total width: 2,200 mm, table width: 700 mm, table length: 500 mm, table load: 200 kg, overall weight: 3,500 kg, We are offering here a Deckel Maho DMU 50 T with Heidenhain Mill Plus control for sale. Tedpfx Aew Dfbhodljf

Condition: used, machine/vehicle number: 12216, Rotor diameter: 300 mm Rotor width: 500 mm 3-knife rotor 2 rows stator knives Inlet cross section approx. 300 x 500 mm Todpfxjh D Imio Adljf Drive motor: 30 kW

Condition: used, Year of construction: 1995, thickness of jaw:200 mm Todpfx Adscxxm Doljf weight:ca. 50 kg dimensions of the machine ca.:700 x 300 x 170 mmxmmxmm

Year of construction: 1966, condition: used, pressure 100 t throat 410 mm stroke 8-112 mm Tedpfx Aslp U D Ejdlsf no. of strokes doubel-strokes per min. 55 / 82 ram - range of adjustment 80 mm table surface area 950 x 700 mm ram surface 700x450 mm hole in the table Ø 280 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 7,0 t dimensions of the machine ca. 1400x2200x2800 mm

Condition: used, Pressure: 160t Stroke: 20-140mm Length of stroke: 50 Todjc Nt Akepfx Adlof Up table size: 600x330mm Down table size: 1000x700mm Power: 15kw Weight: 10.000kgr

Condition: excellent (used), pressure 50 t throat 245 mm stroke 14 / 90 mm ram adjustment 75 mm table height adjustment 150 mm strokes per minute 42/85 table surface area 700 x 490 mm ram surface 400 x 230 mm tool hole in ram 40 mm Tedpotrhf Asfx Adlef total power requirement 4 kW weight of the machine ca. 3,41 t dimensions of the machine ca. 0,8 x 1,75 x 2,1 m Machine was partially overhauled in our house as follows: - disassembly, cleaning and inspection - table milled over - new paintwork of the machine - shaft crack test carried out - disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals - additional air storage tanks - new control cabinet with safety control and touchscreen display - new wiring of the machine - new Vogel central lubrication system with piping - new Herion press safety valve + maintenance unit - new Balluff cam swith - new 2-hand control panel - new footswitch - Current UVV test with braking time measurement - Machine safe for hand inlay work