Machining center

HARTFORD HEP 2150

Condition: good (used), Year of construction: 2001, functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m The machine will be equipped with a new Siemens S7 control system with new control panel, dressing quill SS electrically controlled via servo motor. Machine will be completely checked, defective parts repaired or replaced. Hjdsuy Ifgspfx Aadenh Various options possible (KM system, infeed/outfeed, workpiece rulers etc.)

Condition: used, Year of construction: 2008, x-travel 800 mm y-travel 700 mm z-travel 600 mm control SIN 840D Powerline spindle turning speed - stepless 1 - 8.000 U/min power capacity at 40 % load 28,00 kW spindle diameter in front bearing 80,00 mm spindle taper HSK-A100 B-axis 187 ° feed X/Y/Z-axis 15.000 mm/min rapid traverse X/Y/Z 50,00 m/min feed force X/Y/Z axis 10.000 N rapid traverse B-axis 11,20 U/min size of pallet 800 x 630 mm table load 0,80 t c-axis 360,000 x 0,001 ° table turning speeds 1 - 500 U/min toolpiece magazine: chain magazine 120 Stück tool diameter 100 mm tool diameter with 2 vacant positions 160 mm tool length - max. 350 mm weight of tools max. 10,00 kg total power requirement 60,00 kW weight of the machine ca. 13,00 t dimensions of the machine ca. 7,40 x 5,30 x H3,50 m Hnjdpfx Aaew Df A Ssdoh With Siemens SIN840D control, tool taper cleaning, tool breakage monitoring, coolant system, 2 pressure levels (40bar / 80bar), chip conveyor, operating mode 4, exhauster.

Year of construction: 1985, condition: used, workpiece diameter 25-90 mm threading length 3000 mm thread pitch 2-16 mm total power requirement 25 kW Hnodpfx Aastzdyzodsh weight of the machine ca. 10,5 t dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours of spindle: 4,486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Hnsdpfx Ajw Au H Rsadsh Electrical connections Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Hnjdpfjtk N Dksx Aadoh

Year of construction: 2012, condition: good (used), Muratec MW120 GT for sale Used, in excellent condition. The machine can be viewed by appointment. Delivery is the customer's responsibility, but we can help with packing and loading of need. Hnedpfxjifi D To Aadeh Delivery: EXW Székesfehérvár

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table width: 850 mm, table length: 3,700 mm, overall weight: 18,500 kg, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2007 Travel / Stroke Capacities: Longitudinal (X): 3,500 mm Vertical (Y): 1,250 mm Cross (Z): 1,000 mm Table dimensions: Length: 3,700 mm Width: 850 mm T-slots: 5 x 22 H12 Reference slot: 1 x 22 H8 T-slot spacing: 140 mm Paintwork: RAL 5011 (steel blue) RAL 7035 (light grey) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle 24 kW Spindle speed range: Spindle speed: 20-3,000 rpm Torque: 479 Nm Max. feed rate: X, Y, and Z axes 25,000 mm/min Mean acceleration: 2 m/s² Weight: approx. 18,500 kg HEIDENHAIN iTNC 530 HSCI Swiveling control pendant including Heidenhain iTNC 530 control (1 processor / 4 axes) with software options 1 and 2. Automatic Milling Head, Diagonal H4 Automatic indexing Soraluce “Diagonal” milling head, Type H4 / 2 planes with 2.5° x 2.5° indexing, 479 Nm, tool clamping force 18,000 N. Automatic tool changer: Automatic tool changer (random carousel) with 20 magazine positions: The automatic tool change is carried out in the vertical position of the tool spindle. Maximum tool diameter: 125 mm Maximum tool length: 250 mm Maximum tool weight: 15 kg Number of magazine positions: 20 Chip conveyor package: Three chip conveyors, two longitudinal screw conveyors and one cross hinge belt conveyor with integrated coolant tank, discharge height: 1,000 mm Coolant System 2: Hnsdpfoxgn Efex Aadoh Coolant/lubricant system 2 with discharge via shower ring and internal coolant supply according to DIN 69871 Form AD, tank capacity 500 l + 150 l lift tank with pump, delivery rate 50 l/min, delivery pressure 5/8 bar. Increased delivery pressure of high-pressure pump from 15 bar. RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are sourced by us following a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, all identified visible defects and faults are professionally repaired by our expert service team.

Year of construction: 2024, condition: new, Twin-head cutting-off machine with automatic mobile head movement driven by an NC-controlled brushless motor. Pneumatic tilting of cutting units from 90° to 22°30’ (outward) in two fixed positions or with optional mechanical Hsdswp Ugqspfx Aadsnh adjustment system for intermediate angles. Hydro-pneumatic blade feed.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. Hjdpfx Aasxmhdnjdonh The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools Hnsdpfoif Ek Rox Aadjh • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.