Cup hinge drilling machine

Hess mit vielen einstellbaren Anschlägen

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Nlsdsu Agh Sepfx Aazsg Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: new, Year of construction: 2026, Max. edge thickness 3 mm (optionally up to 8 mm) Min/Max. work piece thickness 8–60 mm* Min. workpiece length approx. 200 mm* Min. workpiece width approx. 80 mm* Feed speed approx. 10 m/min. Ready to operate approx. 6 min. Power consumption max. approx. 14 kW Electrical connection 400 V – 3 Ph – 50 Hz Machine dimensions 5,250 x 1,230 x 1,430 mm (LxWxH) Weight approx. 1,700 kg pre-milling head Whispercut radius for corner rounder R = 2mm heatable infeed fence quick change device f.motor corner Nlodpfx Aajg Tu Rkezog rounder change motor for corner rounding unit including HM profile cutter radius for change motor R = 1mm Radius Multi-Radiusscraper R2/R1 wheels release agent spraying unit cleaning agent spraying unit protection spraying edge nesting pneumatic 3-point adjustment

Condition: good (used), Year of construction: 2008, 10 cup wheels vertical glass edging machine with variable angle 0-45° total number of woreking meters : 179.000 Nledpfxjx Hvxpj Aazog min. glass size height : 70 mm speed : 0,5 - 5 m/min. glass thikness : 3 - 50 mm machine dimensions : L x W x H : 8,8 x 1,2 x 3 m weight : 4300 Kg

Year of construction: 1985, condition: good (used), Offer 22556 Technical Data: - Saw blade diameter: 420 mm - Saw blade bore: 30 mm - Max. cutting length: 3000 mm - Smallest cutting length at 90° + 45°: 335 mm - Cutting range, see diagram attached - Swiveling range inwards, manual: 90 - 22.5° - Tilting range inwards, manual: 90 - 45° - Saw blade speed: 2800 rpm - Drive: 380 V / 2 x 4000 Watt - Compressed air connection: 7 bar - Air consumption per working cycle, approx.: 64 l - Space requirement, approx.: W 4500 x H 1950 x D 1600 mm Nlodsimdlrepfx Aazog - Weight, approx.: 1400 kg - Including: - Cutting length adjustment with positioning control - Positioning control renewed around 2002 by WOLFF GmbH - Saw head swiveling and tilting for high and wide profiles, - as well as miter cuts

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Nlsdpfjt Tqy Eox Aazeg Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Year of construction: 2000, For fully automated assembly of frame components. Frame outer dimensions: min. 120 x 120 mm max. 1050 x 2,500 mm Nodpfx Aasd H Irfozolg 2 heating rails

Condition: excellent (used), Year of construction: 1999, The machine is equipped with a magazine of elements. The parts are returned to the operator. Nlodpfx Aaett Ddcszjg Equipped with 17 spindles

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 512 Alüminyum Pvc 3'lü Kol Yeri Delme Makinesi Yüksek Frekans Motorlu, - Complies with CE standards. - Possibility to open lock places, hinge slots, handle holes of PVC profiles - Vertical axis operation of the copy head - Horizontal axis operation of the triple drilling system - Universal template, possibility to make optional template - Possibility of triple drilling copy milling or grooving system to work as a single system - Comfortable working thanks to the powerful motor - High frequency motor (18000 rpm) - Cooling system OPTION Nedsrana Eopfx Aazelg - Right conveyor system (1 meter)

Condition: excellent (used), Year of construction: 1994, Device description: Nsdpjwyb Ntofx Aazslg grinding top/bottom working width 200mm electric adjustment of the upper unit star/delta start-up installed power 14kW pneumatic belt tensioning belt oscillation working height up to 150mm

Condition: as good as new (ex-display), Year of construction: 2024, - Edge and frame press, single-sided/stationary - Gluing stand without frame pressing mechanism - Usable dimensions in mm as edge press: 2900 x 1600 - Usable dimensions in mm as frame press: 2600 x 1600 (with option QJ 002) - External dimensions in mm: 3100 x 700 x 2150 mm (L x W x H) Nljdpfx Aehd N Eqsazog - 3 roller-bearing-mounted, vertical pressure beams with robust bevel gear and counter bearing - Press stroke: 150 mm, pressing force: 2000 kg - Frame pressing mechanism with left-hand counter bearing - Sliding carriage for width adjustment, with central locking system - 2 horizontal bevel gears - Pressure beam with spindle pressure - Chassis with 4 swivel casters (2 of which are braked) - Paint finish: RAL 9002 grey-white, pressure plate and counter bearing RAL 5010 gentian blue