Machining center

HOMAG BMG 211/32/15/K

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30 Hfjdpfxjfi Tg Hs Aiiol

Condition: used, Year of construction: 2009, Numerical control POWER CONTROL PC 22 Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3000 Maximum panel height mm 60 PVC-ABS edge thickness mm 3 Feed speed mt/min 40 Feed speed with rounders mt/min 20 Motorized pressure rubber belt Bearing track with retractable pin (distance between pins mm 500) Squaring part composed of: Anti-adhesive group Timed automatic anti-splinter group Double shredder group Free space for any group addition Gluing unit with pre-melter and glue pot Automatic adjustment of the edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit FK rounding unit Hjdpfjpp Tkfjx Aiiefl Edge scraper unit Glue scraper group Brush group Anti-adhesive group

Condition: repair required (used), Year of construction: 2002, functionality: not functional, ★ PRICE REDUCED – MUST SELL: €30,000 (was €80,000) ★ Hfedpjpugxnjfx Aiisl We are selling 3 Imea 2002 Wood Dryers (Imea) + Steam Generator + Boiler (Elbi) 3 Wood Dryers and 1 Steam Generator: - Dimensions: 12.5m x 7.2m x 4.2m 📐 - Capacity for each dryer: 220m3 of timber 🌳 - Steam Generator: 8.5m x 6m x 5m 📐 - Aluminum structure, sandwich panels 🏗️ Wood and Sawdust Waste Boiler: - Equipped with a pumping system, pipes, and a boiler - Power: 3,500,000kCal/h (40,000kW) Everything operates on an automated system. Total: €50,000 excluding VAT 💰 Dismantling to be done by the buyer 🔧 the seller can assist with a telescopic manitou 📍 Pickup Address: Teiu 337291, Romania 🌍 For more information or to make an offer, please contact us.

Condition: used, Year of construction: 2009, Homag BOF 211 VENTURE 16L Hfodpfx Aszpf Troiijl Year 2009, 5-axis machine.

Year of construction: 2006, condition: ready for operation (used), An inspection is possible. Hedpfxoqvnmbe Aiiofl

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,6 - 3 Panels thickness (min/max) mm 8 - 60 / Working width (min/max) mm 225 - 3000 Numerical Control Power Control PC 22 /Software: Wood Commander Adjustable feeding speed (m/min ) 15 - 32 Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 / Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + SERVO Hjdpfx Asp N D Ngeiisfl Band Pressure zone "A" Edge coils supporting unit (No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,22) Rough Trimming unit (2 x Kw 0,55) Fine Trimming unit 2 x Kw 0,4 Corner Rounding unit (Contour Trimming) FF 12 (4 x Kw 0,4) LEFT SIDE: 2 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 2) 0°-90° RIGHT SIDE: 1 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 1) 0°-90° Profile edge scraping unit PN10 (PNEU) Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: used, Dimter Profipress L 2500 Year of manufacture: 2006 Hfsdpfsyhggrjx Aiiel Dimensions: • Lamella width (for panels): 30-150 mm • Thickness: 11-60 mm • Infeed length: 800-2500 mm • Panel width: variable, up to max. 1300 mm • Infeed width per cycle: min. 650 mm / max. 1300 mm • Integrated hydraulic unit for pressing force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connection rating for 40 kW RF generator: 56 kW

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price Hedpfx Aiov Sthgsiofl To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Year of construction: 2008, functionality: fully functional, HESSEMANN 3-HEAD SANDER: Hfodpjx Rdn Tsfx Aiiol Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)) Roller diameter: 250 mm Belt speeds: approx. 18 m/s 22 kW Anti-wear braking unit, automatic band length adjustment Dust extraction system controlled depending on the workpiece, counter-rotating abrasive belt, abrasive belt grit compensation by computer Belt speeds: 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Drive: 15 kW Includes continuously adjustable sanding speed via electronic frequency inverter, with double number of extraction holes for the dust extraction device. Anti-wear braking unit, automatic band length adjustment for abrasive belt edges potentially of different lengths; dust extraction controlled by workpiece detection, deactivatable, counter-rotating abrasive belt. 2 Pressure beams with selective pressure adjustment system – CSD® system Continuously adjustable individual pressure elements, for single and multiple workpiece feeding. Spacing: 32 mm. Tolerance compensation for workpieces up to 2 m by maintenance-free pressure magnets. Working width as well as start and end positions of the pressure beam are electronically adjustable. The pressure elements are driven by lifting electromagnets capable of continuously varying the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology guarantees constantly proportionate pressure relative to pad overlap on the workpiece. The risk of sanding through on the edges is virtually eliminated by this dynamic, continuous pressure force control.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 4,600 kg, positioning accuracy: 0.01 mm, table width: 500 mm, air demand: 1 m³/h, compressed air connection: 6 bar, warranty duration: 12 months, working height: 150 mm, saw band length: 6,170 mm, saw band width: 90 mm, wheel diameter: 1,000 mm, wheel width: 80 mm, heavy-duty horizontal Thin Cutting Band Saw for all your re-sawing applications, including flooring, windows, doors, furniture and musical instruments. Put these advantages to work in your operation: - Steel Table at the cutting spot for the highest precision - High precision lamellas with gluable surface in tolerance ± 0.15 mm, depending on lamellas width - Divided Feed Conveyor with Top Driven Infeed Pressure Unit - Bearings on both sides of the Main Wheel Shafts for maximum cutting stability - Saw Monitoring during machine operation Hfsdev T Rnmjpfx Aiijl - Heavy-duty, cast-iron construction-built for longevity and superior tolerances - CNC touch-screen control panel for easy height adjustment - Thin-kerf, high-tension blades to minimize your waste - Handles material up to 500 mm wide, 150 mm thick - Adjustable cutting speed and feed speed as well - Produces smooth, gluable surface - Variable feed up to 16 m/min. - Cutting speed up to 50 m/s