Eccentric Press - Single Column
IWK PEKRD 125

Condition

Used

Location

Schmölln

Eccentric Press - Single Column IWK PEKRD 125

Machine data

Machine type:: Eccentric Press - Single Column

Manufacturer:: IWK

Model:: PEKRD 125

Condition:: excellent (used)

Price & Location

Location:: Schmölln

Call

Details about the offer

Listing ID:: A16522876

Reference number:: 1010-979

Update:: 27.08.2025

Description

pressure 125 t
throat 400 mm
stroke 6 - 125 mm
Djdpfet Eix Rex Amgjci
ram adjustment 100 mm
daylight (stroke down, ram adjustment above) 400 mm
table surface area 1100 x 750 mm
no. of strokes 60 Hub/min
total power requirement 16 kW
weight of the machine ca. 10 t
dimensions of the machine ca. BxTxH 1,1 x 1,9 x 3,53 m
- Machine is partially overhauled
- was completely disassembled and technically checked,
- new seals
- new pneumatic clutch
- new seals in the compensating cylinders
- new drive motor
- new ball spindle
- new coloring
- current UVV test and braking time measurement

Machine safe for hand inlay work

For an additional charge, we can equip the machine as follows:
- Work area protection with BWS / cycle operation, but only in
conjunction with a new control cabinet (separate) with ABB safety
control and touch panel
- 2-hand operation on separate stand

Seller

Registered since: 2013

83 listings online

Call

Send inquiry

Telephone & Fax

+49 34491... show

These listings may also fit your interest.

Listing

Plettenberg

883 km

Eccentric Press - Single Column
IWKPEKRD 125

Call

Year of construction: 1975, condition: used, pressure 125 t throat 400 mm stroke 6-125 mm ram - range of adjustment 100 mm dayligth 400 mm table surface area 1100x750 mm no. of strokes 60 Hub/min ram surface 800x550 mm hole in the table Ø 150 mm total power requirement 14 kW weight of the machine ca. 9,0 t Dcodpelp U Dhsfx Amgji dimensions of the machine ca. BxTxH 1500x2200x3500 mm

See details

Listing

Eccentric Press - Single Column WEINGARTEN N 63

Eislingen/Fils

1,164 km

Eccentric Press - Single Column
WEINGARTENN 63

Call

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm Dedpfx Aefx Hv Hsmgjci clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

See details

Listing

Single Column Press - Hydraulic DUNKES HZ 40 (CE)

Eislingen/Fils

1,164 km

Single Column Press - Hydraulic
DUNKESHZ 40 (CE)

Call

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t Dcsdpfx Amsvuuckegei required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

See details

Listing

Fuente de Cantos

1,920 km

SPLINE ROLLING
EX CELL OROTO FLO 3225

Call

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Dcodpod Nw Ttefx Amgei Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv

See details

Listing

Velen

787 km

Pneumatic Press
BERG & SCHMIDPND 85/S

Call

Listing

Flat die thread rolling machine EWM GW62

Wiefelstede

785 km

Flat die thread rolling machine
EWMGW62

€4,500

Fixed price plus VAT

Call

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 Dcodpfx Amsi Eg Nkegsi -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

See details

Listing

Broaching machine vertical under power Rausch RS 10 x 915

Neulingen-Göbrichen

1,092 km

Broaching machine vertical under power
RauschRS 10 x 915

Call

Listing

Press Feeding System Coiltec COMPACT FEEDER CMKS H3

Berlin

1,143 km

Press Feeding System
CoiltecCOMPACT FEEDER CMKS H3

Call

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Dodpfx Amsi El Ucsgjci

See details

Listing

Eccentric Press - Single Column Schuler CR 80-345

Schmölln

1,163 km

Eccentric Press - Single Column
SchulerCR 80-345

Call

Year of construction: 1980, condition: used, pressure 80 t throat - mm stroke 50 mm table surface area 875 x 695 mm Dedpfedlcy Hjx Amgjci ram surface 350 x 355 mm ram adjustment 71 mm no. of strokes 30 - 90 Hub/min distance between columns 450 mm weight of the machine ca. 6,2 t dimensions of the machine ca. 2,0 x 2,1 x 3,2 m daylight (stroke down, ram adjustment above) 480 mm Further information: - the machine is currently being a partially overhauled - the machine was re-equipped with the following components: * separate control cabinet with touchscreen including cabling * new painting of the individual components in the dismantled state After the partial overhaul, the machine is safe for manual insertion open tool, a current UVV test is carried out before delivery and braking time measurement.

See details

Listing

Vertical inside broaching machine Karl Klink RSI 10 DT

Hövelhof

893 km

Vertical inside broaching machine
Karl KlinkRSI 10 DT

Call

Year of construction: 1960, condition: refurbished (used), machine/vehicle number: 1733, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI10DT Machine No.: 1733 Djdpfjgyd S Sox Amgoci Year of manufacture: 1960 weight: 4,9 to broaching force: 10.000kg With switch plate ( 2 stations ) Power supply: 380V / 50Hz Rated current: 35 A Connected load: 7,5 kW The machine is completely revised and is therefore in a very good condition.

See details

Advertise here