Veneer press

JOOS

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table by Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, form gluing, form veneering, edge gluing, etc. With this press, you can, with some limitations, do without a hydraulic veneer press. Tsdpfjy Hl Hpsx Am Tea New heat-resistant silicone membrane, extremely stretchable and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or mineral materials. Frame internal dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with 40 m³/h capacity and two vacuum tanks, each 200 liters, for comfortable operation and rapid evacuation. Electronic vacuum pressure switch, which means the pump switches off when the target negative pressure is reached and does not run continuously. Movable on four swivel casters, lockable Frame easily folds open, secured with two latches Double frame for quick replacement of the membrane. A new silicone membrane is currently installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Original paint, some areas have been touched up The silicone membrane and the base plate have been replaced, the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020mm (L x W x H). Weight approx. 550kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: refurbished (used), functionality: fully functional, Refurbished, six-piston hydraulic flatbed press of Italian manufacture. Branded veneer press for easy wood veneering, with warranty and service. Veneer sheet dimensions: 3000 x 1300 mm Pressure at full surface: 2.5 kg/cm2 Total maximum pressure: 90 tons Number of hydraulic pistons: 6 MYLAR Teflon film on the plates Prepared for water-based plate heating Option to install a hot water boiler Price includes complete machine refurbishment Price: 12,000 EUR (excluding VAT) The machine is refurbished, adjusted, and tested. The condition of the refurbishment and the machine's readiness for delivery must be verified in advance! Tjdpfx Amsvvbbce Tsa In stock: Telnice near Brno, Czech Republic Testing, demonstration of the machine, and operator training are standard.

Condition: used, Year of construction: 1972, Second-hand machine Year of manufacture: 1972 Features and technical specifications: - Pressing surface 2500 x 1100 mm - Total pressing force: 650 kN - Opening width: 400 mm - Number/diameter of cylinders: 4/80 mm - Operating pressure: 325 bar - Closing time: approx. 16 sec. - Panel type: aluminium / natural - Thickness: approx. 51 mm - Power rating per heating plate: approx. 6.8 kW - Heating-up time to 90°C: approx. 16 mins. Tsdozk N U Nspfx Am Tsa - Dimensions: 2900 x 1300 x 2050 mm - Weight: approx. 2,900 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Second-hand machine Features and technical specifications: - Pressing area: 2,200 × 1,100 mm - Number of cylinders: 4 - Max. pressing force: 60 tonnes - Configuration: 1 stage - Heating plates: gold-anodised ELKOM energy-saving plates - Opening width: 350 mm - Rated power: 14 kW - Piston diameter: 80 mm - Operating pressure: 365 atü Dimensions: 2,600 m × 1,250 m × 1,750 mm Todpfxszk Nyxj Am Toa Availability: at short notice Location: Röllbach

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. Todpfjw Naansx Am Tja The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: used, Year of construction: 1983, Max. press length: 2500 mm Max. press width: 1250 mm Total pressing force: 80 t Specific pressing force: 2.5 kg/cm² Press opening width: 400 mm Heating plate material: standard aluminum Operation: button control Swivel button: Yes Number of pressure pistons: 4 Safety edge strip: Yes Tedjzkl Tbepfx Am Tsa Condition of heating plate: good Weight: 3800 kg Dimensions: 2850 x 1410 x 2000 mm Storage location: Nattheim

Condition: excellent (used), Year of construction: 2008, For sale: Hydraulic through-feed press JOOS DLP 240/OK Machine type: Hydraulic through-feed press with automatic feeding and unloading of elements. Application: Designed for coating flat panel materials of uniform thickness using coating material under elevated temperature. Basic data: Manufacturer: JOOS Model: DLP 240/OK Year of manufacture: 2008 Operating voltage: 400 V / 50 Hz Power consumption: 55.5 kW Hydraulic cylinders: 8 × 125 mm + 2 × 40 mm Operating pressure: 245 bar Pressing surface: 4200 × 1400 mm (L × W) Total pressing force: 2400 kN Condition: very good Documentation: complete Tjdjyc Eukjpfx Am Tja Important note: The machine does NOT have a control program. TAG: hydraulic press, through-feed press, industrial press, coating press, panel processing machine, production line equipment, industrial machinery, JOOS, Siempelkamp, Orma, Italpresse, Dieffenbacher, Bürkle, Langzauner

Condition: excellent (used), Year of construction: 2022, IES screw compressed air units supply a continuous, reliable flow of compressed air directly to the point of use without requiring a dedicated room. The ECB – SCB range, made according to high quality standards, uses components by leading companies on the market, ensuring reliability and traceability. 7.5 KW 8 Bar 1000 lts/min Very low running hours - 1351 run hours Tjdpfx Aexaxr Njm Tsa Complete with three filter set

Condition: used, Year of construction: 1979, Pressing area: 2200 mm x 1100 mm Tsdpfxjy A Hkbo Am Tsa Opening: 360 mm Heating: electric Plate surface: aluminium Emergency stop: no Pressing force: 65 t Number of cylinders: 4 Power consumption: 21 A Machine length: 2500 mm Machine width: 1300 mm Weight: 2600 kg

Condition: used, Year of construction: 1989, Pressing area: 2500 mm x 1100 mm Opening: 400 mm Heating: electric Plate surface: Aluminium, gold anodized Emergency stop: yes Pressing force: 65 t Number of cylinders: 4 Current consumption: 22 A Todpfeyl Tinex Am Tsa Machine length: 3000 mm Machine width: 1300 mm Weight: 3000 kg

Year of construction: 2006, condition: good (used), FIN Glue spreader SC2R/1300 with 2 rollers The year 2006 manufacture: FIN s.r.l. Italy Tjdpjfguntjfx Am Tsa main technical specification: Width of working: 1300mm The maximum passage between roller: 120mm The diameter of rollers: 185mm Advancement speed: 19m/min Net weight 390 Kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 200 x 153cm 400 V, 50 Hz, 037 kW Accurate and uniform spreading with any type of glue, excellent technical characteristics, added to the high practicalness, functionality and safety for the operator, place it at the forefront among the 2 roller glue spreaders. Spreading roller covered in antiacid rubber, ground and furrowed, hard wearing, as they are built with a rational layer of rubber it is, therefore, possible to carry out 6-7 grindings. It is easy and quick to disassemble. Spreading, precise and uniform on one or both sides of the panels. Special shock-absorbers, on the roller supports, allow the rollers an automatic opening depth, so as to spread panels of different thickness within 5 mm. they also compensate for eventual parallelism differences of the panel. Uniform glue dosing by a rectified distribution tank, in sheet-iron, with very quick extraction to allow cleaning. Collecting tank, for glue and washing water, in galvanized sheet-iron, extractable for easy cleaning. Safety protections, in sheet metal on the rollers and glue distribution tank, a sheet metal protection prevents the introduction between the rollers of any object more than 5 mm. thick over the transit established, ensuring the maximum safety for the operator. Electrical installation, in a waterproof case with fuses, thermal switch for motor and transformer protection. Control panel, with starting button, stopping button and warning light (24 V). Rollers rotation chain with self-registrable turnbuckle pinion. Roller washing with a bored washing tube, for the water intake during this operation.

Condition: used, Year of construction: 1976, Pressing area: 2500mm x 1250mm Opening: 360mm Tjdjx Edl Eepfx Am Tja Top platen heating: electric Bottom platen heating: defective Platen surface: aluminum, anodized Pressing force: 90t Number of cylinders: 4 Power consumption: approx. 33A Machine length: 3000mm Machine width: 1500mm Weight: 4000kg

Condition: as good as new (ex-display), Year of construction: 2021, input current: 81 A, input frequency: 60 Hz, type of input current: three-phase, total length: 1,830 mm, total width: 1,618 mm, total height: 2,400 mm, overall weight: 5,000 kg, operating temperature: 140 °C, cylinder diameter: 65 mm, opening width: 100 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 year of production 2021 Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 Tedpfst Eq E Sox Am Tsa 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Tsdpfxeu Tg Spo Am Tsa Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: good (used), Year of construction: 2005, machine/vehicle number: 1872080, functionality: fully functional, pressing force: 100 t, table width: 1,500 mm, table length: 2,300 mm, oil tank capacity: 330 l, total length: 4,400 mm, total width: 3,200 mm, total height: 4,350 mm, overall weight: 18,000 kg, year of last overhaul: 2025, number of cylinders: 5, Equipment: CE marking, documentation/manual, Hydraulic press JOOS HP S 100/OK – 100 t – Year of manufacture 2005 Manufacturer: Gottfried Joos Maschinenfabrik GmbH Model: HP S 100/OK Year of manufacture: 2005 CE compliant Technical data: • Pressing force: 1,000 kN / 100 t • Maximum hydraulic pressure: 300 bar • Cylinders: o 4 × single-acting, Ø 90 mm o 1 × double-acting, Ø 100 / 70 mm • Cylinder stroke: 1,200 mm • Pressing area: 2,300 × 1,500 mm • Press chamber opening: 2,100 mm • Dimensions (L × W × H): approx. 4,400 × 3,200 × 4,350 mm • Weight: approx. 18,000 kg • Hydraulic tank: 330 l • Hydraulic oil: ISO VG 46 • Sound power level: 88 dB(A) Condition: used, industrial machine Application areas: pressing, straightening, insert molding, joining, assembly Todpozh Iwwefx Am Tea Availability: upon agreement Loading/dismantling: possible upon agreement