Cylindrical grinding machine

Junker JUMAT 3000/50S

Condition: like new (used), Year of construction: 2022, OEM – laser marker / engraving laser (diode pumped YAG-laser) Dkodpfxepyg N Ae Anzsr The laser beam source was used for some time to generate plasma as part of a scientific project. Overall, however, it only has few operation time. Due to the short pulse length, this laser is also very suitable as an engraving laser Laser source of the complete system is a 10 Watt diode-pumped YAG-laser with 1064 nm wavelength. The working area is 100 x 100 mm, up to 300 x 300 mm is available as an option. No external cooling is necessary. Input-voltage: 110...240 VAC / 50 Hz. Applications are laser engraving and material ablation. The control software is installed on a PC, optionally also a Laptop can be used. The language of the software can be choosen (German, English). The laser is prepared for an integration into a ‘higher level system’, but can also be used as a 'stand alone' system. In this case interfaces for Interlock, emergency stop, laser control etc. are available. We are happy to support the customer according to his requirements.

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, torque: 18,500 Nm, controller manufacturer: Heidenhain, controller model: iTnc530, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, coolant supply: 30 bar, distance table center to spindle nose: 680 mm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 90 mm, tool weight: 6 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Additionally, the machine is equipped with: - Spindle change-over gearbox - Flat guideways - Centralized oil lubrication Dkedpoyh Ri Iofx Anzer - Control cabinet cooler - Spindle oil cooler - Grundfos IKZ pump - Oil skimmer - Hand wheel - Renishaw 3D measuring probe - Signal lamp - Tool cabinet - Various tool holders

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens Sinumerik 840D max. workpiece diameter 1600 mm max. module 20 mm tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 Dedpfx Asw Rrb Honzskr - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation

Condition: good (used), Year of construction: 1990, 4-Axis Machining Centre Table dimensions 1200 x 660 mm Travel paths X 1050 mm, Y 650 mm, Z 660 mm Max. table load 1600 kg Feed speeds 15000 mm/min. Tol magazine with 31 tool places, partly equipped with BT 50 tool holders. 4th axis (controlled) NIKKEN CNC 250, clamping chuck diameter 250 mm Dimensions in mm: about 3000 x 5000 x 2900 Weight in kg: about 13000 Dksdpfxofbml No Anzor

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, total width: 2,500 mm, total length: 4,500 mm, total height: 3,200 mm, Offered is a double spindle pick up turning machine VSC 250 DUO. Dkjdpsr Nc Ufsfx Anzjr There are 2 nearly identical machines available. Each machine is equipped with 2 independent working spindles and 2 EMAG turrets. The machine can produce 2 identical workpieces with the same machining operation, as well as one workpiece in two successive machining operations. The VSC 250 DUO will receive a general overhaul before delivery and gets a control upgrade to Siemens Sinumerik ONE. The machine can be equipped with other periphery (chip conveyor, coolant system, external automation, etc.), depending on requirements. COTROL Siemens Sinumerik One TECHNICAL DATA workpiece diameter: max. 250 mm workpiece height: max. 150 mm chuck diameter: 250/315 mm swing diameter: 350 mm X-stroke: 745 mm Z-stroke: 300 mm TOOL CARRIER working area 1 1x EMAG disc turrets, 12x VDI 50 without driven tools working area 2 1x EMAG disc turret, 12x VDI 50 with driven tools Price, delivery time and equipment of the machine on request.

Condition: used, TOS BHU 50×2000 – USED UNIVERSAL CYLINDRICAL GRINDER A used TOS BHU 50 universal cylindrical grinder, center distance 2,000 mm, from a company liquidation. Inspection on-site or via video call is possible at any time. The following technical data are taken from the machine-specific TOS-BHU-50 data sheet and serve as a technical reference. Binding values for this individual machine will be determined after inspection. KEY FEATURES - Automatic program for longitudinal, transverse, and plunge grinding, external and internal - Precision standard IT class 5 - Spindles on hydrodynamic bearings with automatic bearing adjustment - Infinitely variable workpiece spindle speed, swivel headstock on both sides - Swiveling grinding wheel head TECHNICAL DATA (BHU 50 SERIES) - Grinding diameter: 500 mm - Center distance: 2,000 mm - Center height: 250 mm - Grinding wheel (Ø x width x bore): 500 x 80 x 203 mm - Diameter of worn grinding wheel: 380 mm - Diameter of workpiece in open/closed steady rest: 110 mm - Diameter of chuck: 200 mm - Taper in workpiece spindle and tailstock spindle: MK 5 - Swivel range of workpiece spindle headstock: 90°, grinding wheel headstock: ±45° - Largest longitudinal travel of the table (at 2,000 mm center distance): 2,290 mm - Table speed, infinitely variable: 0.05-5 m/min - Grinding spindle speed: 1,230 / 1,470 rpm - Workpiece spindle speeds: 16 steps, range 12-400 rpm - Grinding wheel headstock motor: 7.5 kW - Total power consumption: 16 kVA - Machine weight (at 2,000 mm center distance): approx. 6,600 kg - Largest workpiece weight: 300 kg between centers, 300 kg cantilevered STANDARD EQUIPMENT (SERIES) - Grinding wheel 500 x 80 x 203 mm for 33 m/s circumferential speed, flange, and guard - Dressing and mounting device for the grinding wheel flange, balancing mandrel - 2 fixed centers MK 5, 2 open steady rests (Ø 10-110 mm) - Sedimentation coolant system, splash guard - Micrometric dressing device for the grinding wheel (tailstock) - Driver and operating key set, machine lamp, technical documentation We would be happy to clarify in advance whether the specific machine has the full range of features based on its actual equipment. CONDITION Used machine from a company liquidation. Sold "as is, where is," warranty excluded. On-site inspection or video call inspection is highly recommended; independent functional and accuracy testing is available upon request. A general overhaul is possible upon request and for an additional charge. Dkedpozi Strsfx Anzsr OUR SERVICE Online or on-site factory inspection, transport can be organized upon request, installation, commissioning, and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of FDM, the German Association of Machine and Tool Wholesale. As this is an individual machine, availability is subject to prior sale. Please call or write to us briefly, and we will arrange an inspection appointment as soon as possible.

Condition: used, Year of construction: 2007, x-travel 3.600 mm y-travel 920 mm z-travel 820 mm control iTNC530 Heidenhain B - axis +/- 90 x 1 ° C-axis 360 x 0,001 ° feed X/Y/Z-axis 1 - 20.000 mm/min rapid traverse X-axis 100 m/min rapid traverse Y-axis 60 m/min Dkjdoy Sbikjpfx Anzer rapid traverse Z-axis 60 m/min spindle turning speed - stepless 20 - 10.000 U/min tool taper SK50 power capacity at 100 % load 32,00 kW power capacity at 40 % load 48,00 KW max. torque at 40% / 100% load 294 / 196 kW table surface area 4.200 x 900 mm number of T-slots 9 T-slot - distance 100 mm T-slots 1x 18H7 / 8x 18H12 table load capacity - central/maximum 4.200 kg tool magazin: 80 tool diameter 115 mm wotkpiece diameter with 2 vacant positions 160 mm tool length - max. 360 mm weight of tools max. 12,00 kg total power requirement 85,00 kW weight of the machine ca. 32,00 t dimensions of the machine ca. 11,50 x 6,60 x H3,30 m Vertical machining center with HEIDENHAIN iTNC530 control, swivel milling head, partition wall, tool rack magazine with 80 positions, chip conveyor, coolant system, NC-extension table Ø700mm, operating mode 4.

Condition: used, Year of construction: 2009, machine/vehicle number: V445C3-00236, Zoller Venturion 450 Precise measurement regardless of operator High degree of automation with CNC axes, autofocus, and rotary encoder Power-operated and universal tool clamping High-precision “ace” spindle clamps tools at the push of a button ZOLLER image processing “pilot 4.0” and large 24" monitor Industrial high-resolution camera Next to the CNC machine, in the workshop, in manufacturing cells User-friendly Dedpfx Ajy D D T Ajnzekr

Condition: used, Year of construction: 2012, x-travel 2100 mm y-travel 1020 mm z-travel 762 mm Djdpfox Sr A Uox Anzjkr Control Fanuc MXP-200FP spindle speed 6000 U/min spindle capacity ca. 22 kW max. torque on the spindle ca. 550 Nm tool taper SK 50 table surface area 2300 x 1020 mm max. table load 3000 kg T-slots 6 x 22 mm T-slot - distance 150 mm 3-Axis CNC Machining Center Equipment/Accessories: - Automatic tool changer with chain magazine, 40 stations - max. tool-Ø: 120/240 mm - max. tool length: 350 mm - coolant system with internal coolant supply and filter - emulsion mist extraction - electronic handwheel - 2 pcs. magnetic clamping plates 800 x 400 mm - various tool tapers SK50 - chip conveyor

Condition: like new (used), Year of construction: 2011, measuring range X-axis: 100 mm, measuring range Z-axis: 1,000 mm, mount diameter: 100 mm, overall weight: 160 kg, path measurement accuracy: 2 mm, tool weight: 160,000 g, Year of construction: 2011 Fully automatic with manual options Intuitive input of automatic measurement cycles Wear-free and maintenance-free linear motors Flexible control console From manual to fully automatic Low distortion even under the maximum permissible load thanks to its high installed weight FEM-optimised and thermally stable cast iron construction RFID – data carrier system Customer-specific data storage Measurement processes with integrated data retrieval and storage Integration of all popular RFID systems The read / write head can be positioned automatically and manually for all popular tool holder systems Technikal data Length and diameter up to 1,000 mm Max. tool diameter for measuring according to snap gauge principle 100mm Maximum tool weight 160 kg Tool holder SK50 (additional holders availale from company HAIMER/Microset) Concentricity at the spindle nose 2 μm Repeatability ±2 μm Tool preseting Quick and precise measuring results thanks to intuitive operation Accurate measurement values for complex and helical cutters with the precise focus window Dedsyzzb Sspfx Anzskr User administration and access privileges Display currently in 16:9 format Cross hair fixed / floating with automatic measurement lines and automatic contour evaluation One design for the software of all equipment classes Windows 7 Professional or Ultimate, whatever you need Data exchange Post-processed data is transferred to the relevant data exchange drive either via the network or via USB. All equipment can provide tool data to almost any software (tool management, databases, CAD / CAM) via a bidirectional interface – irrespective of whether.