MIG/MAG welding machine 350 A

KEMPPI Weld Force KPS3500

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,8/2,2 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,5 x 1,78 x 1,3 m ACTION PRICE !!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Chip removal brush • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material Fgodpfjd Iiptsx Adaoi 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: refurbished (used), K+G Weather angle grinder 114 Motor power 12 kW, 28 a stainless steel with feed ring screw, 2 speeds weight:615 kg Machine size 70x100x128cm Fgedpfx Aenp Hqdsdaji Of course it is possible to visit the machine by appointment. Errors and prior sale reserved. All information is non-binding. The correctness and accuracy of the information and prices are not guaranteed. A warranty and / or liability is excluded. Until full payment, the machine remains our property.

Condition: used, Year of construction: 2011, 1 used welding machine Manufacturer: Merkle Type: MobiARC 280 cel Year: 2011 Technical data: Welding inverter Merkle MobiARC 280 cel+ - with accessories Primary winding : Mains voltage: 400 V, mains frequency: 50/60 Hz, power consumption: 8,3/5,5 | 9,7/8,3 kW, power consumption: 12/8 | 14/12 A, maximum current: 21/16 A, cos φ: 0.98, E-hand welding : electrode diameter: 1.5-6.0 mm open circuit voltage: 96 / 90 V Fodpfx Adoh Nvfnjajgi Welding voltage: 20.6-31.20 V Welding current: 15-280 A, current at 60 %: 250 / 260 A TIG welding : open circuit voltage: 96 / 90 V, welding voltage: 10-21.2 V, welding current: 5-280 A, current at 60 %: 250 / 270 A, : , Insulation class: H, Protection class: IP23, operating modes: E-Hand, TIG (DC), cooling: AF, Overall dimensions: 485x200x435 mm Weight: 17,5 kg

Condition: used, TIG Welding Machine MESSER GRIESHEIM Type Combitig GW 23 AC/DC The machine only operates with direct current welding and contact ignition Serial No. 445276 Year of manufacture: approx. 1990 Output: 230 Amps = 35% duty cycle 180 Amps = 60% duty cycle 140 Amps = 100% duty cycle Infinitely variable setting range Current type: DC Mains connection: 400 V, 50 Hz, 32 A plug - 2-stroke / 4-stroke welding mode - DC welding with contact ignition works - AC welding and high-frequency ignition do not work - 7 meter hose package with hand torch - Connection plug for remote potentiometer (foot pedal) – foot pedal not included - Air-cooled - Gas pressure regulator Required space (L x W x H): 850 x 480 x 600 mm Weight: approx. 90 kg The welding test shows good results when welding stainless steel with DC; Fgedpfx Aodzqa Iedaji the HF ignition does not work, but the arc can be ignited via brief contact. When welding aluminum with AC, no arc is formed.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, power: 33 kW (44.87 HP), overall weight: 1,570 kg, fuel type: diesel, color: original, axle configuration: 1 axle, fuel: diesel, Schliesing 325EX‑D chipper: The compact one with a rotating chipping unit The Schliesing 325EX‑D chipper is a powerful wood chipper that is ideal for demanding wood chipping applications with its powerful motor, flexible feed options and robust design. With a pivoting feed hopper and a variety of safety features, it meets the highest standards and offers an efficient solution for processing logs up to a diameter of Ø 20 cm. Technical data: Type: Schliesing 325 EX Fjdpfxev Ev E Ue Adaegi Logs: Up to Ø 20 cm Feed width: 24 cm Engine power: 33 kW / 44.9 HP Weight: Approx. 1,570 kg Features: Engine and chassis: Water-cooled, Stage V 4-cylinder Kubota common rail turbo diesel engine with DPF, output 33 kW / 44.9 HP. Industrial freewheel clutch between engine and chipping disc to protect the engine, bearings and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds up to 80 km/h with EU homologation. Robust, fixed sheet steel fenders. Device for support wheel at the front and parking support at the rear. Lighting in accordance with StVZO with impact-protected components. Pneumatic tires 205/65 R15C with EU homologation. Housing/hopper/blow-out pipe: Foldable intake hopper with at least 1,500 mm input depth. Fully galvanized hopper flap for durability. Hopper dimensions (inside): width = 1,040 mm, height = 960 mm. Pivoting blow-out pipe with adjustable spreading flap. Blow-out pipe on ball bearing slewing ring for flexible alignment. Noise insulation on relevant machine parts such as the chipper hood and the blow-out pipe. Emergency stop button on top of the hopper and on the side of the hopper flap. Chipping mechanism: Rotatable chipper housing with adjustable input angle of 270°. Safety circuit in accordance with EN 13525. Chipping disk with a diameter of Ø 655 mm and a thickness of 35 mm. Closed blade system for quick and safe blade changes. Continuously adjustable chipping knives, can be resharpened multiple times for a long service life. Horizontal counter knife and vertical counter blade can each be used twice for a long service life. Winding protection on the main bearing of the chipping disc. Hydraulic feed: Feed control with its own hydraulic circuit. PowerGrip feed roller (240 mm wide) with hydraulic feed for easy and even material transport. Parallel guidance of the top roller for even feed without jamming. Hydraulic adjustable feed speed to control the wood chip size. Fill level indicator for the hydraulic oil tank.

Condition: used, TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine Fsdsdzwwnspfx Adasgi -without hose package -Max. Welding power: 250 A. -Air cooled -Incl. Ground cable -Gas valve -Dimensions: 370/720/H870 mm -Weight: 52 kg

Condition: used, L-TEC Inverter TIG Welding Machine Type Inverter TIG 200 DC TIG welding machine for direct current (DC) Serial No. 184548 Year of manufacture: approx. 1994 Output: 200 amps = 60% duty cycle 155 amps = 100% duty cycle Adjustment range: infinitely variable Current type: DC (direct current) Mains connection: 400 Volt, 50 Hz, 32 Amp plug - 4-meter hose package with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space required (L x W x H): 850 x 480 x 740 mm Weight: approx. 150 kg The welding test shows very good results when welding stainless steel with direct current. Fsdedzqb Ejpfx Adaogi Overall in good condition.

Condition: good (used), Threaded snowing machine Hahn and Goebel HG 12E Spindle rotation 180-900 rpm 380v Fgedped Rkbrefx Adaoi MaschNr.1917/16 M4-M65

Condition: excellent (used), functionality: fully functional, power: 7.35 kW (9.99 HP), fuel type: diesel, gearing type: mechanical, Year of construction: 2003, AGRIA 3400 Differential Single-axle tractor / tool carrier - 10 HP Yanmar L100AE diesel engine - 4V+4R shuttle gearbox Fgodpfjwzwftex Adaoi - Handlebar height and side adjustable - Tyres: 6.00-12 AS Accessories included in the purchase price: - R2 MT-90 rotary harrow "new" This Agria 3400 single-axle tractor is in good overall condition, recently serviced, and ready for immediate use! Sold as a used machine, excluding returns, warranty, and liability. Net price €7,555 // Gross price €8,990 - Inspection / test drive possible - Nationwide shipping €220, excluding islands

Condition: used, Year of construction: 1980, machine/vehicle number: xxxx, Lg.no. 24211 Technical data approx: - max. working width 1020 mm - max. material thickness at 40 kg/mm² strength 1.5 mm - man. back gauge adjustable up to 550 mm - front angle stop Fjdpfx Adst H I Aqsaegi - sheet hold-down device - Table size 1100 x 650 mm - Working height 900 mm - Space requirement approx. W 1800 x H 1450 x D 850 mm - Weight approx. 400 kg - mobile