Section beding machine with hydraulic feed of roll

KK-Industries Profilbiegemaschine Sahinler HPK-160 DP ( 2 Speed)

Condition: new, Year of construction: 2025, Effective Tube Cutting Length: 6500mm/9200mm Laser Output Power: 6000w/3000w/2000w/1500w Effective Round Tube Cutting Diameter: Φ20-230mm Gedpfxeg Dgbhe Abusbh Effective Square Tube Cutting Diameter: □20*20-□160*160mm Edge Length: 20-170mm Outer Circle Diameter: ≤230mm Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1.Bigger than Bigger The maximum cutting diameter of T series is 30%longer than the mainstream products in the market ; The maximum cutting weight is 100% heavier than the mainstream products in the market. 2.Chuck position control, torque control function The position control CNC self-centering chuck with independent intellectual property rights can automatically clamp material according to the input tube size; Position monitoring in torque mode to ensure that the thick tube is not loosened and the small tube is not deformed;Brand new dust-proof structure, long-lasting use without lagging. 3.Edge-seeking, center-finding Brand new function of edge-seeking, center-finding. Optimized edge-finding method and algorithm, higher cutting precision and stability

Year of construction: 2021, condition: new, Fiber delivery cable with instalation ( splicing )on your IPG, Maxphotonic , Raycus, GW.... laser source. We are doing reparation IPG laser module in your place with warranty. Gbedpfx Ajg D Urgsbujh Speaking English and Serbian language.

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Gsdswkaalopfx Abuobh Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2022, Applicable Material: metal Condition: New Gjdpfx Abegyw Sdouebh Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING Control Software: Bodor Pro Place of Origin: China Brand Name: Bodor Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Laser Head Brand: bodorgenius Control System Brand: bodorpro Weight (KG): 2200 KG Key Selling Points: Tenon-and-mortise type plate welding structure bed Warranty: 3 years Laser power: 1000W Power supply: 110V/220V/380V 50Hz/60Hz

Condition: like new (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 051888, Used automatic disc cut-off saw Brand: Pedrazzoli Model: SB 350/45 AP Registration number: 051888 Year: 2004 Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Pneumatic and anti-burr removable vice. Pneumatic cylinder for head movement, with brake for speed regulation. Transmission with double extensible pulley for variable speed from 15 to 90 m/s. Tilting head on adjustable self-lubricating bushings. 600 mm pitch feeder controlled by pneumatic cylinder. Repeat up to a maximum of 9 steps, to obtain a total stroke of 5400 mm. Maximum feeder clamp opening 160 mm. Gedpfx Aorfw Ikjbuebh Programmable piece counter. Minimum final cut waste of 160 mm. Feeder speed regulating valve. Ammeter. Reverse gear. Emergency button and switch with padlock on the control panel. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for tank cleaning. Integral guarding designed for quick blade change. Blade disc Ø 350 mm. Cutting capacity: Round tubes 0°: 102mm 45° right: 102mm Square tubes 0°: 85mm 45° right: 90mm Rectangular tubes 0°: 158 x 85mm 45° right: 120 x 85mm Features: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Work station height: 950 mm Weight: 420 kg

Condition: new, functionality: fully functional, Year of construction: 2023, laser power: 3,000 W, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, NS-6022HG Tube laser cutting machine 3kw 3 Chuck Professional Pipe Laser Cutting Machine with automatic loading system with 6m automatic unloading with Chinese 3D bevel head-BLT tubes T CE Anti-radiation glass protective guards AVR KIT OF NOZZLE, LENS ETC(SPCS FOR EACH) Series: NS-HG Type: Three chucks Groove function: Standard Power: 3KW Maximum pipe length: 7000mm Round pipe: Φ15mm-Φ220mm Gsdpfx Aswu Rm Rebuebh Square pipe: 15mm*15mm~150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flatoval tube: Short axis≥15mm, long axis ≤ 210mm Channel steel: Max20# I-beam: Max18# H steel: Max175*90mm Maximum acceleration: 1.0G Chuck maximum speed: 100r/min Machine weight: 10t Power supply specification: 380VAC, 50Hz Standard: Support servo (groove), dust prevention (Y axis), dust prevention (X axis), dust prevention (Z axis), safety fence (light curtain), zero tail material, cutting area dust removal, rear card hollow dust removal

Condition: new, angle iron / side length: 80 x 80 x 8double T-iron over x-axis: IPN 120 IPN 80U-iron over x-axis: UPN 140total power requirements: 4weight approx.: 1700messurements (LxWxH): 1.450 x 1.000 x 1.400 Technical specifications Shaft Diameter: 80mm Roll diameter: 245 mm Driven rollers: 3 Motor power: 4 kW Speed: 6 m/min. Bending performances (cross-section / min. diameter): Flat bar upright: 100x20 mm / 2000 mm; 80x20mm / 800mm; 30x10 / 300 Flat bar lying: 125x25 mm / 600 mm; 60x5mm / 300mm Square steel: 45x45 mm / 500 mm; 15x15mm / 380mm Round steel: Ø 50 mm / 500 mm; Ø 15mm / 380mm tube: Ø 100x2.5 mm / 1,200 mm; Ø 15x1mm / 380mm; Ø 3x5.48 / 800 mm; Ø 1/2x2.77 / 380 mm Form tube upright: 80x25x3 mm / 800 mm; 25x15x2mm / 350mm Form tube square: 70x70x3 mm / 1,300 mm; 25x25x2mm / 350mm Angle iron leg outside: 80x80x8 mm / 800 mm; 30x30x3mm / 400mm Angle iron leg inside: 70x70x7 mm / 700 mm; 30x30x3mm / 450mm Gedpfx Abjd Ab H Tousbh UPN leg outside: UPN 140 / 1600 mm; RPN 120 / 900mm; RPN 100 / 800mm UPN leg inside: UPN 140 / 1,600 mm; RPN 120 / 1000mm; RPN 100 / 800mm IPN lying: IPN 120 / 600 mm; IPN 80 / 400mm gear 3 motorized rollers stable welded steel construction hydraulic Adjustment of the two bottom rollers Digital display of the bottom roller positions on a separate control panel lateral straightening rollers adjustable in 3 axes can be used horizontally and vertically Forward and reverse drive Machine and equipment according to CE regulations Options: NC Unit 7 Screen  EURO 9.000,-- We have more than 190 references!

Year of construction: 2019, condition: new, Machine is designed to produce two spacers in the same time, with double stroke (pitch) of 150 mm, with heights from 70 to 220 mm, diameter of line wires from 3.5 to 5 mm and diagonal wire diameter from 3.5 to 4 mm. Gsdpfx Absd N Hv Esuobh The main parts of machine: 1. Pay-off 2. Straightening system 3. Line wire pooling unit with loop. 4. The system of diagonal wire bending 5. Welding unit 6. Output table with bending unit 7. Energy electrical cabinet 8. Control cabinet

Condition: good (used), Sturdy crane system, ideal for glass storage or workshop, Load capacity: 3t, Length: 14250 mm, Gbsdpjryv S Asfx Abueh width: 8500 mm, height: 3650 mm Max. hook height: 3280 mm, Max. Overall height: 3950 mm.

Condition: new, Shaft diameter: 180Upper Roll Diameter: 60Bottom Roll Diameter: 50working speed: 5motor power: 3length: 1200width: 850heigth: 1200weight approx.: 1000 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 7 Screen EURO 9.000,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7 Gbodpfxod Ab H Nj Abueh         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength