Trimming saw

Krüsi

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Short-term availability – THE OPPORTUNITY! We are offering our well-maintained and fully operational chalet machine from the renowned Swiss manufacturer KRÜSI for sale. As we are switching to another model, you now have the chance to acquire this flawless machine. It is still in use, so functional testing and trial runs are welcome at any time. Dismantling and collection by buyer Assembly in consultation with Krüsi recommended Machine year: 2018, in operation since 2019 Total length with tables approx. 35.5 m Available from 08/2026 Machine details: - 4 milling units, each 4 kW, spindle drive via toothed belt Guedpfxey Ri Hus An Ieg - Maximum working range: 250 mm construction height and 245 mm wall thickness - 6 frequency converters for soft start and motor braking - Automatic work cycle and pneumatic workpiece clamping - Siko position indicators on adjustment spindles for horizontal operation - Pneumatic under-table crosscut saw, left, 5.5 kW with frequency converter - Hand-operated drilling unit 1.8 kW, mounted on the right column - Hydropneumatic feed for drilling unit - Additional pneumatic vertical clamping cylinder with bracket - Additional pneumatic horizontal clamping cylinder with bracket - Auxiliary table for milling unit with additional vertical clamping cylinder - Stop rail 0.5 m, mounted at the front left of the machine frame - Stop rail 0.5 m, mounted at the front right of the machine frame - Auxiliary table for short workpieces - Steel chip funnel for pit extraction - Dovetail and end-groove milling machine (with pneumatic rotary axis) Milling and drilling tools: For horizontal milling units: - WPL rabbet cutter Ø 180 mm, adjustable range 61-240 mm x 40 mm, Z=2 For vertical milling units: - WPL rabbet cutter Ø 230 mm, adjustable range 61-240 mm x 40 mm, Z=2 - WPL rabbet cutter Ø 270 mm, adjustable range 61-240 mm x 40 mm, Z=2 For drilling unit: - Drill Ø 20 mm, with long centering tip - Drill Ø 30 mm, with long centering tip For 90° swiveling dovetail and end-groove milling machine: - WS rabbet cutter Ø 230 mm, bottom Ø 40 mm, width 40 mm - WS dovetail cutter 20°, 92 x 36.5 x IG M 24 left, Z3, V3, F3 with chip-breaker grooves, MK 863-1 - WS dovetail cutter 20°, 92 x 36.5 x Ø 30 mm, Z3, V3, F3 with chip-breaker grooves, MK 863-2 - Clamping wrench for above dovetail cutters Accessories: Horizontal above: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 30 mm, bore Ø 40, Z2 - Center part alu Ø 270 mm, width 50 mm, bore Ø 40, Z2 Horizontal below: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 40 mm, bore Ø 40, Z2 Vertical front: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 40 mm, bore Ø 40, Z2 Vertical rear: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 30 mm, bore Ø 40, Z2 - Safety guard for horizontal above with holder (for cutter Ø 270 mm) - Safety guard for vertical rear with holder (for cutter Ø 180 mm)

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, KRÜSI chalet building machine / log house production line type CM 40 Year of construction 2002 Krüsi CM40, consisting of the following components: Circular saw ( cross-cut saw ) Horizontal and vertical log house router Groove milling machine (horizontal) boring mill Infeed table 6m Outfeed table 6 m KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE-marked Ie Dkovfv Tfjk Ddfetk Condition: good, technically checked and cleaned / ready for use Functional principle Processing of wood for chalet construction / log house construction The beams can be processed in a single operation - Cutting to length - Horizontal and vertical milling of necks / grooves in one clamping operation - Drilling - Milling the face grooves Workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for maximum machining accuracy. Slide guidance with dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for use, with contactor control, motors protected by thermal relay. Electrical equipment for voltage 380 V, 50 Hz, with protective covers, Central connection for on-site chip extraction, with 2 eccentric clamps, Godpfx Ajzvrf Isn Ieug without milling tool (folder). With hydropneumatic horizontal and vertical feed, electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely variable. Fully wired and installed, including air maintenance unit. Patches with a thickness of more than 14 cm must be processed in two tensions. Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analog dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide-tipped with cutting depth limiter (synchronous operation) Adjustable riving knife Motor speed min. 1 / 2900 Power kW 2.2 2nd CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal trimming unit Milling cutter Ø 180mm Milling cutter width max.130mm From cutter width 60 mm only use aluminum alloy cutters with reversible cutting edges 2 hydropneumatic feed motors kW 2.2 each Hydropneumatic feed Rapid traverse and work feed infinitely adjustable 3rd drilling unit: Manual feed Spindle adjustment with analog dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1.8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Cutter Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatic Operating pressure on site min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: good (used), Year of manufacture: 1998 ZA 66 /95 With laser cutting indicator Dimensions: 5700 x 1500 x 1900 mm Parallelogram table, tiltable up to 60 degrees 4 motors Gujdjy Am Elepfx An Ijg Cross-cut unit Cutting height: 290 mm Saw blade diameter: 750 mm 5.5 kW motor Primary saw Cutting depth: 175 mm (blade 450 mm) Cutting depth: 225 mm (blade 550 mm) 10 kW motor Trimming saws, each 2.2 kW Cutting depth: 125 mm Saw blade diameter: 350 mm Tiltable up to 45 degrees

Condition: excellent (used), LOG CABIN MILLING MACHINE FOR PRODUCING CHALET CORNER JOINTS BY MILLING FOUR SIDES OF THE LOG BEAM. MAXIMUM LOG LENGTH 6000MM (DISTANCE BETWEEN 5770 MM) Guedpfjy Sgx Rex An Ijg MINIMUM LENGTH 450 MM 4X MILLING HEADS PER SIDE (2 SIDES) CAPABLE OF 3 CYCLES PER MINUTE MAXIMUM WIDTH 250 MM MAXIMUM THICKNESS 140MM SUPPLIED WITH ADJUSTABLE TOOLING SUITABLE FOR 34MM TO 70MM JOINTS 8X 4 KW MILLING MOTORS DIGITALLY DISPLAYED LENGTH MEASUREMENT SYSTEM SIMPLE ELECTRONIC CONTROLS (NO PLC) 5,5 KW FEED MOTOR POSSIBLE TO SUPPLY WITH STACKING UNIT AFTER IF NEEDED MODIFIED LEFT SIDE TO ALLOW CHALET ROOF OVERHANG LENGTH AS NEEDED VERY GOOD QUALITY KNOTCHING PRICE DISMANTLED AND LOADED TO TRUCK

Condition: good (used), Year of construction: 1994, I sell the automatic CNC working centre for BLOCK-HOUSE production Krüsi CM-40. Year 1994. Incutting saw Tenoning head Top + Bottom Tenoning head Left + Right Dowel drilling unit 4-head milling unit Automatic feeding system +-1mm Entry length 12m Suitable for wooden house constructions! Available immediately. Gusdpjr Atcyjfx An Ieg

Condition: excellent (used), Bargain from liquidation: Krüsi ZA 66, swivelling and mobile Gujdpeylpv Defx An Iog

Condition: used, Year of construction: 2010, Chalet construction machineused, good condition, little usedmake Krüsitype CMI 40year of manufacture 2010CE type-approvedbsi 140 mm round timber corner jointssaw 1xdrilling 1xrouting 3xworkpiece height 200 mmworkpiece width 250 mmweight approx. 2200 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in actual condition as inspected,without guarantee and warranty Gusdpjvwfqqjfx An Ieg