Injection Molding Machine

KraussMaffei KM300-1900C2

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder. Klodoiyyf Ispfx Am Eer

Condition: ready for operation (used), Year of construction: 2008, A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible. Kledpfxet Eu Azo Am Ejr

Condition: excellent (used), Year of construction: 2006, Clamping force: 500 t Screw diameter: 80 mm Platten dimensions: 1300 x 1200 mm Distance between tie bars V: 900 mm Distance between tie bars H: 900 mm Shot volume: 1779 cm3 Shot weight: 1620 g Injection pressure: 1855 bar Working hours: 46.511 Kledpfx Ajva H Amom Ejr Type: Horizontal Drive: Hydraulic

Condition: used, Year of construction: 2005, operating hours: 62,235 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 25,100 kg, The ENGEL Victory 2050/350 is a tie-bar-less injection molding machine manufactured in 2005. With a machine weight of 25,100 kg, it offers a maximum shot volume of 1,145 cm³ and a maximum injection pressure of 1,482 bar. The clamping force is 350 tons and the screw diameter is 70 mm. Technical data at a glance: - Year of construction: 2005 - Machine weight: 25,100 kg - Maximum shot volume: 1,145 cm³ - Maximum injection pressure: 1,482 bar - Clamping force: 350 t - Screw diameter: 70 mm - Tool installation height: 350–1,000 mm - Clamping plate size: max. 1,200 x 1,100 mm - Ejector stroke: max. 250 mm - Control system: ENGEL - Total operating hours: 62,235 h - Additional equipment: - MORETTO Hopper Loader R10 C52 dosing device - ENGEL ERC linear handling system - Longitudinal structure - Removal cell with machine housing - Separating cardboard feeder Kjdpfxevxzw No Am Eelr - Two-stage roller conveyor The tie-bar-less design of the ENGEL Victory series enables free access to the tool area, which allows the use of larger tools on smaller machines, thus increasing efficiency. This design also offers advantages in automation, as robots and peripherals can be more easily integrated. The machine is equipped with the ENGEL control system, which is known for its intuitive operation and precise process control. The servo-hydraulic technology ensures energy-efficient operation and reduces the need for cooling water. In addition, the machine has a MORETTO dosing device and an ENGEL linear handling system, which supports production automation and increases overall productivity. With a total of 62,235 operating hours, the machine is in a used but functional condition.

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Moulding Machine Type: Servo-hydraulic injection moulding machine Year of manufacture: 2017 Control system: UNILOG B8 INJECTION UNIT • Screw diameter: 105 mm • Screw stroke: 525 mm • Screw L/D ratio: 22 • Calculated shot volume: 4,545 cm³ • Injection pressure: 1,931 bar • Max. screw speed: 167 rpm • Max. plasticising rate (PS): 151 g/s • Screw torque: 8,000 Nm • Nozzle stroke / closing force: 950 mm / 129 kN • Injection flow rate: 725 cm³/s • Injection flow rate with dual pump (option): 906 cm³/s • Open-air injection flow rate with tank (option): 1,812 cm³/s • Barrel heating capacity: 53.9 kW • Number of heating zones: 7 CLAMPING UNIT • Clamping force: 9,000 kN • Max. opening stroke: 2,100 mm • Min./Max. mould height: 500–1,000 mm • Platen dimensions: 1,720 × 1,550 mm • Tie bar spacing: 1,200 × 1,000 mm • Ejector: stroke 300 mm / force 165 kN • Mould opening force: 300 kN GENERAL DATA Klsdpjwzy N Ujfx Am Ejr • Pump power: 90 kW • Heating power: 53.9 kW • Hydraulic oil tank capacity: 1,100 l • Machine dimensions (L × W × H): 10,100 × 3,400 × 2,700 mm • Weight: 35,200 kg

Condition: excellent (used), Year of construction: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with robot Clamping unit Parameter Value Clamping force 8,000 kN Platen dimensions (W × H) 1,620 × 1,500 mm Kodjwy U E Uspfx Am Eolr Tie bar spacing (W × H) 1,120 × 1,000 mm Min. / Max. mould height 500 – 1,050 mm Maximum distance between platens 2,080 mm Mould opening stroke 1,030 mm Ejector stroke 350 mm Ejector force 139 kN Maximum mould weight 7,200 kg Injection unit Parameter Value Screw diameter 130 mm Injection volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio (screw length/diameter) 20 Electrical-hydraulic equipment Parameter Value Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Dimensions and weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (auxiliary equipment)

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Kedjuiykdjpfx Am Eslr

Condition: like new (used), Year of construction: 2003, For sale complet MC 4 control for Krauss-Maffei machines, tested and full in function ! Kljdpfx Asikfmhom Ejr

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: NETSTAL Typ: ELION800-270 Baujahr: 2007 Kledewf I Hiepfx Am Ejr Schließkraft: 80 Tonnen Holmabstand 410 x 410 mm Einbauhöhe min. /max.: 500 mm Öffnungsweg: 350 mm Schnecken DN: 35 mm Max. Hubvolumen: 123 cm³ Spritzteilgewicht in PS: 118 g

Condition: good (used), Year of construction: 2004, VC330-80 plus Kodpfx Amevdqbhe Ejlr Year: 2004 Clamping force : 800kn Injection Unit 330 Control unit CC200 A01 Screw D40 Working hours 91112 1x corepull 4x digital input 4x digital output 1x signe pahse socket 1x trhee phase socket NEW PUMP