Welding kit

L-TEC 200 DC L-TEC 200 DC

Condition: used, MIG MAG welding machine, gas-shielded welding unit, CLOOS type GLC 357 N MIG MAG welding power source Manufacturer's number: 576, Year of manufacture: approx. 1985 Rated power: 350 Amps Power: 350 Amps - 80% duty cycle 310 Amps - 100% duty cycle Adjustment range: stepless Connecting hose package: 4.5 meters Mains connection: 380 Volts, 50 Hz, 32 Amp plug - 2-cycle and 4-cycle welding system Dsdpehubg Tofx Aggewb - external wire feeder, type CK 72 ZK, with 2-roller drive and 4.5-meter hose package - 3-meter hose package with central connection and CLOOS hand torch - water-cooled - pressure gauge for gas cylinder - welding machine equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 260 kg Device tested - function is working properly.

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches Djdpfxsrgzv Ne Aggewb * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: refurbished (used), Year of construction: 2020, machine/vehicle number: PM_1000, Used polishing machine for manual operation. Drive power: 5.5 kW Dwodpfjfiugusx Aggsb Polishing disc diameter: 1000 mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Erlo SEAR 25-RS drill, gear drill with automatic feeds, includes threading system, spindle speeds 64-3060 rpm, with chuck and protection, machine in very good condition, year 2006 Dedsv Rnhxjpfx Aggswb

Year of construction: 1958, condition: ready for operation (used), Offered is a conventional lathe. Swing diameter over bed: 500mm, swing diameter over support: 300mm, spindle bore: 58mm, taper in the tailstock quill: MT 4, design: conventional leadscrew and feed rod lathe, control: manual. Equipped with three-jaw chuck, four-way tool post, tailstock, chip tray. Weight: approx. 2200kg, overall dimensions X/Y/Z: approx. 2700mm/1100mm/1350mm. Inspection possible by arrangement. Dsdpfx Ajzdknwoggewb

Condition: refurbished (used), Year of construction: 2023, operating hours: 813 h, functionality: fully functional, working width: 900 mm, area performance: 5,700 m²/h, overall weight: 957 kg, water tank capacity: 200 l, battery voltage: 36 V, The Kärcher B200R D90 Dose is a 2023 model and has only 813 operating hours. We have completely overhauled the machine, with every component cleaned and functionally tested. The squeegee, base plate, and collision protection have been sandblasted and newly powder-coated in-house. New rubber lips on the squeegee ensure optimal suction results. The machine is sold with brand-new, maintenance-free gel batteries. Additionally, the Kärcher B200 R is equipped with a detergent dosing system, which precisely meters the cleaning agent into the cleaning process. For improved illumination of the working path, the machine also features an auxiliary work light that can be switched on as needed. The Kärcher B200 R is ideally suited for medium to large areas such as logistics warehouses, workshops, or underground car parks. Technical specifications: Working width: 90 cm Fresh water tank: 200 liters Suction width: 118 cm Dwjdpoxx Ta Eofx Aggob Weight: 957 kg

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg Dwedpjdzqb Esfx Aggeb The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: used, Year of construction: 1978, operating hours: 9,125 h, 1978 | Hanomag MF 33C Massey Ferguson / for parts only | Used Wheel Loader | 9125 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Dodsy Iy N Uspfx Aggjwb 💰 Buy Now for EUR 4900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 5 inspection points 5 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Only for parts recovery, not complete. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40580 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Technical Data: - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm - Hydraulic drawbar system - Approx. weight: 1600 kg Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication Dwodpju Tuk Hefx Aggsb - Operating manual, spare parts drawings About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. Tracked Dumper with Front Loader – GP500 PRO DUMPER The GP500 PRO DUMPER is a compact and powerful tracked dumper wheelbarrow with a front loader, powered by a 5.5 HP petrol engine. With a payload capacity of 500 kg, this machine is ideally suited for demanding construction, electrical, plumbing, refurbishment work, and similar applications. It can operate safely on slopes of up to 20 degrees. The robust steel skip, with a volume of 0.196 m³, is hydraulically tipable and suitable for a variety of tasks. The GP500 PRO features an oil cooling system and a foldable operator platform. Manufactured under European technical supervision and based on a durable design, it is fit for use in a wide range of conditions. Comprehensive post-warranty service is also available. TECHNICAL DATA: Operating weight: 470 kg Payload: 500 kg Skip volume: 0.196 m³ Skip dimensions: 1060 × 645 × 480 mm Tipping: hydraulic Start system: electric Drive: hydraulic Maximum travel speed: 3 km/h WORKING RANGE AND DIMENSIONS: Maximum working height: 1310 mm Maximum pin height: 870 mm Maximum discharge height: 270 mm Load reach at maximum discharge height: 350 mm Wheelbase: 810 mm Ground clearance: 53 mm Bucket tipping angle: 55° Bucket width: 780 mm Overall length: 1620 mm Overall width: 850 mm Chassis width: 960 mm Overall height: 1320 mm Turning radius: 1195 mm Djdpfx Ageyk Sl Segewb ENGINE: Engine brand: Rato Maximum output: 4.1 kW / 5.5 HP Maximum speed: 3600 rpm Cooling: air-cooled Oil change volume: 0.5 litres Fuel type: petrol Additional information: Track size: 180 × 60 × 38 mm Fuel tank: 3 litres Hydraulic oil tank: 14 litres PRICE: €3,300 net €3,927 gross