Hydraulic press

Müller ZE_315_16

Condition: used, Year of construction: 2007, pressure 315 t distance between columns 1750 mm stroke 700 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1500 mm pressure of drawing cushion in table 125 t stroke of drawing cushion in table 200 mm die cushion area 1200 x 1400 mm Bsdpfxsvuukbs Aa Njld table height over floor 750 mm ram surface 1640 x 1500 mm power requirement 55,0 + 11,0 kW weight 29,5 t dimensions (WxDxH) 3,2 x 4,5 x 5,8 m Height above floor 5,1 m year of manufacture 1983 - 2007: modernization of electrical control (Siemens S 7) permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact cushioning can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: ready for operation (used), Year of construction: 2013, sheet thickness steel (max.): 25 mm, power: 6 kW (8.16 HP), Working area 3000x1500. Loadmaster system included.Due to not using machine for longer time,the service is required. Bodpfx Aowh R R Nja Njld

Condition: used, functionality: fully functional, Year of construction: 2019, laser hours: 5,780 h, laser power: 4,000 W, TRULASER TUBE 7000 FIBER 4kW Year of manufacture: 07/2019 Laser power: 4kW fiber Laser on: 5780 h (!) Technical information: - Max. outside diameter: 254 mm - Loading and unloading - Loading with LoadMaster Tube: 6,5m / Automatic unolading: 4,5m - RapidCut  Use of a dynamic additional axis  More than fourfold accelerations possible Bevel cut technology package  Bevel cutting up to 45°  Contains electrically movable feed-through chuck - PierceLine  Optimized piercing process - Technology package for tapping Bedpfxjyalb Eo Aa Neld • Additional machining processes such as flow drilling, tapping and twist drilling • NC controlled spindle with standard clamping system (standard interface HSK-A32) • The application and technology parameters of the tool adapter and tools should be requested from the respective supplier • 8-fold tool changer ...and many more options!

Condition: good (used), Year of construction: 2002, Manufacturer: BRÜCK Tip: 12/1600 Bodpfx Aaohrnbke Nold Load capacity: 12000 kg Max sheet width: 1600mm Coil diameter: 1800mm Weight : cca 14 t Without control cabinet!

Condition: good (used), Year of construction: 2000, total height: 47,000 mm, total width: 27,000 mm, total length: 25,000 mm, table width: 1,000 mm, table length: 1,800 mm, overall weight: 43,000 kg, ram plate width: 600 mm, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Separate control cabinet Ritta Blsdpfxetiwgis Aa Njd Side passages Ground level installation

Condition: like new (used), Machine Type: 70K Brand: Illig Bedpfx Aash Ey Euo Nold Model: Molds PP 21 CAV DM70 Diameter cup: 70 mm

Condition: like new (used), Machine Type: 70K Brand: Illig Model: Molds PP 21 CAV DM75 Blodsh Ey D Njpfx Aa Njd Diameter cup: 75 mm

Condition: ready for operation (used), Year of construction: 1980, Power: 300 to Size of bolster: 1.200 x 850 mm Overhang: 400 mm Width of ram: 1.100 mm Opening in bolster: 400 x 250 mm Daylight: 500 mm Frequency: 32 1/min Stroke: 30 - 140 mm Ram adjustment: 105 mm Bljdpod A Hbcefx Aa Ned Weight: app. 19.500kg Other - allowed for 2-Hand safe working - euqipped by safety valve Herion Xsz 20 - Motorized grease lubrication - Pneumatic ram balancing cylinders - Motorized ram adjustment - T-slots in ram - Stand alone control panel - bearing of con rod overhault

Year of construction: 1993, condition: used, TYPE : DEA 400/2000 Type YEAR : n.d. Year MAXIMUM SLEDGEHAMMER PRESSURE : TON. 400 Ram capacity SLIDING STROKE : mm. 1,100 Slide strok MAX VERTICAL LIGHT : mm. 1,600 Max shut height TABLE DIMENSIONS : mm. 2,000 x 1,600 Table size RAPID SPEED : mm/sec 650 Fast stroke TABLE PRESS CAPACITY : TON. 160 Cushion capacity PRE-MILER stroke : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 5,800 Ground up to floor Bedpfx Aeihf R Usa Nold FRONT LIGHT : mm. 3,400 Distance btw uprights LATERAL LIGHT : mm.1,600 Lateral window

Condition: good (used), Year of construction: 1992, Favretto MB 130 – Technical Specifications Machine type: tangential (horizontal) surface grinding machine Year of manufacture: 1992 Table size: 1700 × 400 mm Blodpfx Aot Rwvzja Nsd Magnetic chuck size: approximately 1300 × 400 mm Magnetic plate height: 40 mm Longitudinal travel (X-axis): 1380 mm Cross travel (Y-axis): 450 mm Vertical travel (Z-axis): 550 mm Distance between spindle center and table surface: 203 mm (min) to 753 mm (max) Grinding wheel dimensions: 400 mm diameter × 152 mm width × 100 mm bore Spindle speed: approximately 1400 rpm Longitudinal feed rate: 2000 to 40000 mm/min Cross feed rate: 50 to 3000 mm/min Vertical feed rate: 700 mm/min Grinding head motor power: approximately 15 kW Total installed power: approximately 25 kW Maximum table load without magnetic chuck: approximately 1500 kg Maximum table load with magnetic chuck: approximately 1205 kg Overall grinding capacity (L × W × H): approximately 1500 × 600 × 550 mm Machine weight: approximately 7100 kg