Fan

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,503 h, functionality: fully functional, machine/vehicle number: 01510006441, controller model: MANUAL PLUS 4110, TECHNICAL DETAILS Control: MANUAL PLUS 4110 MACHINE DETAILS Electrical Supply Lhodpfsx Uz Edsx Ahzeb Rated voltage: 400 V Phases: 3~ Frequency: 50 Hz Performance Data Power: 24 kVA Rated current: 35 A Fuse rating: 50 A Operating hours: 32,503 h

Condition: new, saw blade diameter 315/350 mm capacity 90 degrees: round 125 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 160x90 mm capacity 45 degrees: round 105 mm capacity 45 degrees: square 90 mm capacity 60 degrees: flat 80x100 mm total power requirement 1,8/2,5 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,6 x 1,22 x 1,06 m Lhsdpfx Ahjd Iin Tozjb The large workshop saw with sophisticated technology. (20070) • For miter cuts right and left up to 45°, end stop at 90° and at 45° left • For sawing steel, stainless steel, and, to a limited extent, aluminum profiles • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Conical safety clutch made of hardened steel to protect the saw blades. • Large base plate made of solid cast iron for maximum stability and low-vibration sawing • 2 speeds: 30 + 60 rpm • Powerful special gear with elastic clutch for heavy-duty use • Automatic cooling directly on the saw blade • Saw head with double bearings • 24 V safety switch in the handle with restart lock • Length stop, assembly tool ATTENTION: Price does not include saw blade!!!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F876E01576L, Year of construction: 2013, operating hours: 16,860 h, load capacity: 12,000 kg, lifting height: 5,250 mm, fork length: 3,250 mm, fork width: 2,370 mm, empty load weight: 16,350 kg, TECHNICAL DETAILS Lifting capacity: 12,000 kg Lifting height: 5,250 mm Clearance height: 4,500 mm Fork length: 3,250 mm Maximum fork width: 2,370 mm Minimum fork width: 710 mm MACHINE DETAILS Fuel type: Diesel Number of wheels: 6 Attachment: Sideshift, fork positioner Lhjdpfx Ajx Tqanjhzeb Dimensions & Weight Dimensions (L x W x H): 4,350 x 2,500 x 4,500 mm Unladen weight: 16,350 kg Operating hours: 16,860 h EQUIPMENT Pneumatic tyres Full cab Work lights License plate Heater Documentation CE marking

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516216E01234, Year of construction: 2014, operating hours: 5,586 h, load capacity: 2,000 kg, lifting height: 3,250 mm, free lift: 1,640 mm, fork length: 1,590 mm, fork width: 890 mm, TECHNICAL DETAILS Lifting capacity: 2,000 kg Lifting height: 3,250 mm Free lift: 1,640 mm Fork length: 1,590 mm Maximum fork width: 890 mm Minimum fork width: 370 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,051 mm x 1,149 mm x 2,160 mm Weight: 3,448 kg Number of wheels: 4 Drive: Electric Battery type: 625 Ah, 48 V Lhsdpfx Ahsx Tp T Hezob Battery test result: 52% Year of battery manufacture: 2017 Operating hours: 5,586 h EQUIPMENT Fork adjustment Side shift Work lights Free lift

Year of construction: 2021, condition: new, Graver Grinding Machine Make: HERZOG (AMA) Lhjdpfjgllp Uox Ahzjb Model: Pregraph U2 Condition: New machine with warranty - for grinding of gravers, pins, punches and round parts - robust, durable construction - versatile application possibilities - motor protection and restart protection accessories: - Extraction tool, through axial adjustment of the disc, the previous setting is setting is retained - Machine light - Operating tool - Grinding wheel with flange - Operating instructions

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: PB12093N2025005, shaft diameter: 155 mm, empty load weight: 450 kg, Equipment: documentation/manual, Unused profile bending machine, year of manufacture 2025! TECHNICAL DETAILS Shaft diameter: 50 mm Roller diameter: 155 mm Capacity round diameter: 50 mm Shaft speed: 11 rpm Number of rollers: 3 pcs. MACHINE DETAILS Control: Conventional Power: 1.5 kW Ljdpfx Asx Tp N Uohzshb Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 1,800 mm Net weight: 450 kg Transport packages: 1 pc. Operating hours: 0 EQUIPMENT Documentation CE marking CE certificate

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: HB10011N2025006, table width: 550 mm, table length: 300 mm, stroke length: 180 mm, pressing force: 28 t, empty load weight: 800 kg, Unused band bending machine, year of manufacture 2025! TECHNICAL DETAILS Capacity: 28 t Max. stroke: 180 mm Table width: 550 mm Table length: 300 mm MACHINE DETAILS Ledpfjx Tp E Asx Ahzehb Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,400 mm Net weight: 800 kg Transport packages: 1 piece Operating hours: 0 EQUIPMENT Documentation CE marking CE certificate

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 1824 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm Ljdpfx Aevrcqdjhzehb >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feed rates from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, throat depth: 1,100 mm, pressing force: 100 t, table width: 300 mm, table length: 1,500 mm, stroke length: 380 mm, Unused hydraulic press, year of manufacture 2025! TECHNICAL DETAILS Capacity: 100 t Max. stroke: 380 mm Throat depth: 1,100 mm Frame gap: 100 mm Height adjustment: 750 mm Lhsdpfox Tp Abox Ahzjb Table length: 1,500 mm Table width: 300 mm Number of columns: 2 MACHINE DETAILS Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Transport packages: 1 EQUIPMENT Movable press cylinder Documentation CE marking CE certificate

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 60 t, stroke length: 380 mm, table width: 260 mm, table length: 1,000 mm, throat depth: 750 mm, Unused hydraulic press, year of manufacture 2025! TECHNICAL DETAILS Capacity: 60 t Max. stroke: 380 mm Height adjustment: 750 mm Throat depth: 750 mm Adjustment length: 100 mm Table width: 260 mm Table length: 1,000 mm Number of columns: 2 MACHINE DETAILS Motor power: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 1,100 x 800 x 2,200 mm Net weight: 540 kg Transport packages: 1 Lhodpfx Ajx Tpy Tehzjb EQUIPMENT CE marking CE certificate Documentation

Condition: new, The Basic 170 Super PRO is a high-performance Conventional Horizontal Lathe from the renowned brand KNUTH, designed specifically for metalworking applications. Over the years, the Basic series has established itself as a reliable choice for mechanics, featuring a modern ergonomic design and extensive standard equipment to meet the demands of contemporary users in workshops and training centers. This lathe boasts a turning diameter over bed of 354 mm and a center width of 1,000 mm, providing robust construction from high-quality cast iron for maximum stability. With hardened and ground gears for quiet operation, adjustable spindle bearings for precision, and an effective coolant system, the Basic 170 Super PRO ensures long tool life and minimal maintenance. It also features ample storage for accessories and an easy-to-use position indicator for auxiliary functions. For universal applications in repairs, training, and production, you can request a quote for this exceptional Conventional Horizontal Lathe today. Lhedpfx Aheuyhvxjzob

Condition: ready for operation (used), Year of construction: 2025, operating hours: 57 h, functionality: fully functional, machine/vehicle number: 24111638, overall weight: 11,600 kg, cutting height (max.): 940 mm, table width: 1,050 mm, table length: 6,000 mm, Equipment: CE marking, Band saw from 2025 with only 57 operating hours! Sale due to business closure. TECHNICAL DETAILS Max. cutting height: 940 mm Ledpjx Tpx Njfx Ahzehb Table length: 6,000 mm Table width: 1,050 mm Saw orientation: Horizontal MACHINE DETAILS Weight: 11,600 kg Protection: 100 A Total power: 51 kW Main motor power: 30 kW Operating hours: 57 hours EQUIPMENT Documentation CE marking CE certificate

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: AB/226310, total length: 4,300 mm, total width: 1,880 mm, total height: 2,350 mm, empty load weight: 1,310 kg, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,300 x 1,880 x 2,350 mm Unladen weight: 1,310 kg Lhjdpfx Asx Tpv Ijhzob

Condition: new, Precision control and lathe Make: OPTiturn Model: TH 4210 Item No.: 3462050 Condition: new machine Tip height: 210 mm Top width: 1,000 mm equipped as standard with: -Machine base -Quad steel holder -Light machine -Reducing bushing MK 6 / MK 4 -2 fixed centres MK 4 -Fixed bezel, 15-105 mm -Bezel running with 10-65 mm -Chuck guard, electrically protected -Coolant system Lhodpfxodbgxcs Ahzeb -Change gears set -Oil -Control tool -Manual

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting length (max.): 2,200 mm, cutting width (max.): 4,300 mm, stack height: 560 mm, working height: 920 mm, TECHNICAL DETAILS Max. cutting length: 1,600 mm Max. cutting width: 4,300 mm Lift table width: 1,600 mm Working height: 920 mm Saw blade projection: 110 mm Ljdpfxex Tptme Ahzshb Program fence speed: 90 m/min Saw carriage speed: 130 m/min Max. stack height without pit: 560 mm Max. stack weight: 4 t MACHINE DETAILS Main saw motor: 13.5 kW Scoring unit motor: 2.2 kW Average air consumption: 210 Nl/min Transport packages: 8 pcs.