Long belt grinder

MABO - ITALY OLIMPIC

Condition: used, Year of construction: 2007, Amada punch press EMK 3610NT including MP300 loading unit for sale. Ncsdpfx Aow Hww Hsm Tsw We would like to sell the machine as a complete package with tooling and a Wilson X-Sharp grinding machine. The standard tools are listed in the attached inventory. I can send it to you via email.

Condition: used, Year of construction: 2003, Table length: 2500 mm; Table width: 800 mm; Max. table stroke: 650 mm; Column offset: 1000 mm; Pressure shoe: 600; Grinding shoe length: 300 mm; Grinding shoe width: 150 mm; Sanding belt length: 6400 mm; Sanding belt width: 150 mm; Belt air-blast device: No; Upper belt cover: present; Belt speed 1: 18 m/sec; Belt direction: left/right; Weight approx.: 390 kg; Motor power: 3 kW; Extraction diameter: 2x100 mm Storage location: Nodperc I N Sefx Am Tocw

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Ncsdpfx Amezh Nczj Tsw Table size 1270mm x 610mm, 600mm C axis Table (360 degrees) +/- 90-degree head (B axis), 37kW Spindle Motor, 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, through spindle coolant, swarf conveyor, spindle probe.

Condition: excellent (used), Year of construction: 1983, Johannsen Long Belt Sander T 82 - K Pneuma Nodjxpmtyspfx Am Tocw - Air-cushioned sanding pad - Max. workpiece length: 2800 mm - Table width: 950 mm - 5.5 kW main motor - 2.2 kW fan motor - Sanding belt width: 160 mm - Extraction connection diameter: 180 mm - Right/left rotation - Handwheel adjustment - Overall dimensions (L/W/H): 4080x1800x1400 mm - Weight approx. 1000 kg Location: ex stock Saarland - immediately available -

Condition: new, TECHNICIAL SPECIFICATIONS: It can be manufactured from 304ss or 316ss Stainless material in accordance with the preferred surface treatment. The tank side walls are insulated with 50mm glass wool. The tanks that require heating can be produced with serpentine or electric heating. Temperature control is done digitally and follow-up is provided. If necessary, an air mixing device is added to the tanks. In the tanks, stainless ball type valves are used for discharge. WORKING PRINCIPLE: It is based on the principle of surface cleaning and processing by taking the material to be surface cleaned into the baskets as a general application and immersing it in tanks with chemical and / or water by means of a crane and waiting for a while. The aim is to clean the existing oil layer on the metal surface and create a thin film on the metal surface, thereby making the material more conducive to paint and more resistant to external factors. APPLICATION AREAS AND ADVANTAGES: Automotive sector, White goods sector, Lighting sector and General machinery manufacturing sector are facilities that do not require continuous production or provide high and equal quality with less labor in facilities where alternative solutions are not available due to the shape and size of the material or very high capacities are not reached. Chemical values ​​and temperature values ​​can be monitored and controlled by applying automation optionally. APPLICATION: Immersion type surface cleaning applications vary according to preference and required strengths for each sector. As two main applications show: - iron phosphate surface treatment - zinc phosphate surface treatment Apart from these, only applications for cleaning and oil removal can be made. Ncedpjfw N Rtofx Am Tjw There is an option additional to the immersion tank: * a drying oven * 2 stainless steel baskets DRYING OVEN: Generally, the working principle of drying ovens, which is the last step of immersion type surface cleaning units, is like BOX type ovens, however, in order to be suitable for immersion type surface cleaning facility, the parts of the lid are designed on the top side of the oven and the surface cleaning parts are dried in the same basket. In this type of drying system, the parts enter the drying oven and are ready for paint application after drying.

Year of construction: 2025, condition: new, Parker-Airtech presents the latest generation of nitrogen generators, which impress with an outstanding air factor on the market. Our systems are characterized by the exclusive use of high-quality components, which ensures their longevity and reliability. Ncedpfx Amowzv His Tow The cost-effective operation of the system is characterized by low power consumption with maximum output, low-maintenance operation of the system, no additional gases such as hydrogen to reduce oxygen and high-quality and durable components. This means that the system can pay for itself in the shortest possible time. An intelligent monitoring system enables continuous monitoring of the operating parameters and ensures that you are always informed about the status of your system. Whether in the office or on the go - our system can also be conveniently viewed on your mobile phone, so that you always have control over your nitrogen production. The system is individually tailored to your needs. Parker-Airtech has made it its mission to offer you the best technologies to optimally support and maximize your processes. Trust in innovation, quality and performance - choose Parker-Airtech.

Condition: excellent (used), Year of construction: 2009, operating hours: 12,959 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 12,000 rpm, total height: 2,450 mm, total width: 2,400 mm, total length: 3,100 mm, table width: 630 mm, table length: 630 mm, table load: 350 kg, overall weight: 6,800 kg, Kunzmann WF 650 5-Axis Simultaneous Machining Center (2009) Manufacturer: Kunzmann Type: WF 650 5-Axis Simultaneous Machining Center Year of manufacture: 2007 Commissioned: 2009 Condition: Used, very good Machine ON: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software Package 1 for iTNC 530 Ncjdpfx Amey S Ez Ro Tow X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Vertical milling head tilting range: -5° + 95° NC built-in rotary table Ø 630 mm Table load: 350 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 spindles Tools Internal coolant supply: Tool clamp with coolant supply and blow-out device through the spindle. Flow rate 25 l/min at 40 bar Optional water/air through the spindle Paper belt filter Controlled CNC milling head (B-axis) Mounting kit for TS 640 probe head 3D probe with infrared transmission Dimensions LxWxH approx.: 3.1 x 2.4 x 2.45 m Weight approx. 6,800 kg Coolant system LxWxH approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: – Documentation – Machine feet – Machine light

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, controller manufacturer: Siemens, controller model: Sinmerik One, workpiece height (max.): 500 mm, workpiece diameter (max.): 675 mm, workpiece weight (max.): 500 kg, total height: 3,610 mm, total length: 3,970 mm, total width: 3,523 mm, table load: 500 kg, rotary table diameter: 600 mm, rotational speed (max.): 14,000 rpm, overall weight: 11,800 kg, spindle speed (max.): 14,000 rpm, coolant supply: 15 bar, distance table to spindle center: 175 mm, distance table center to spindle nose: 400 mm, spindle motor power: 37,000 W, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, HWACHEON D2-5AX Anniversary Model – The intelligent entry point into 5-axis machining The new HWACHEON D2-5AX was specifically developed to enable companies to make an economical and simultaneously high-performance entry into modern 5-axis machining. As the official anniversary model from HWACHEON, it combines the highest manufacturing quality, modern control technology and maximum flexibility for a wide range of applications. Whether it's single-part production, toolmaking, prototype construction or automated series production – the D2-5AX impresses with its high precision, reliable processes and compact design, while still offering a generous working area. With travel distances of 650 x 500 x 500 mm and a powerful rotary table with a diameter of 600 mm, complex HWACHEON D2-5AX 5-axis machining centers can be accommodated. New machine with state-of-the-art HWACHEON technology The HWACHEON D2-5AX is a compact and powerful 5-axis machining center for modern manufacturing requirements. It is a new machine that impresses with its precision, stability and economy. 5-axis machining allows complex workpieces to be manufactured in a single setup. This reduces setup times, improves accuracy and increases productivity sustainably. The standard equipment includes an automatic BLUM tool measurement ZX Speed and a BLUM workpiece measurement system. This minimizes setup times and ensures a high level of process reliability. Technical highlights • Travel distances X/Y/Z: 650 / 500 / 500 mm • Rotary table Ø 600 mm • Powerful 37 kW main spindle drive • 30-tool magazine • Automatic tool measurement BLUM ZX Speed • Automatic workpiece measurement BLUM • Compact and stable machine construction • High dynamics and precision • Suitable for single parts, small series and series production Ncedszaql Njpfx Am Tew • Optimized for modern manufacturing requirements Control options The HWACHEON D2-5AX is available with: • Siemens Sinumerik ONE for maximum networking and digitization • Fanuc 31i-B5+ for high reliability and comfortable operation in 5-axis mode • Also available as an economical Fanuc 4+1-axis version as an option Your advantages • New machine with state-of-the-art HWACHEON technology • Economical entry into 5-axis machining • Complete machining of complex workpieces in a single setup • Reduced setup times and increased productivity • High manufacturing quality and process reliability • Future-proof control technology • Ideal for training centers, toolmaking, contract manufacturers and production companies The HWACHEON D2-5AX offers a strong combination of precision, performance and economy. This makes it the ideal solution for companies that want to make their manufacturing more efficient, more precise and more future-proof. Further information, technical data and individual equipment options are available upon request. Contact: Benjamin Hoffmann ACROLOC Werkzeugmaschinen GmbH

Condition: new, Year of construction: 2018, Available: 3 pieces (new) Parker MADIGAS nitrogen generators are used to produce nitrogen gas from compressed air and are an economical, reliable and safe alternative to traditionally supplied nitrogen in cylinders or in liquid form. Nitrogen is used as an inert, clean and dry gas to eliminate oxygen from products and processes Overall dimensions W 450 x D 609 x H 1034 mm. Minimum/maximum operating pressure 6/10 bar Nsdpovdty Tofx Am Tscw Weight 196 kg Volume 29.3 l Voltage 110/230 V Year of manufacture: 2018

Condition: new, Year of construction: 2026, The ERBA Separation Conveyor YE-60 is designed for separating workpieces and grinding media. It can be used as a mobile standalone machine or in combination with other machines, such as the ERBA Turbo (centrifugal system). The separation bed can be quickly and easily replaced to suit various requirements. Ncodpfx Amjyq Rhro Tew An optional frequency inverter can be installed, allowing stepless adjustment of the motor speed. The YE-60 can be equipped with many optional features to simplify the separation process, such as a magnetic separator for small parts, a wash nozzle, or a parts hopper. Technical Data: - Gross volume: 60 liters - Motor output: 0.3 kW - Weight: 140 kg - Screen area dimensions: 1,000 x 500 mm - Installation dimensions: 1185 x 540 x 575 mm (L x W x H) As an experienced partner, we provide you with expertise in all aspects of vibratory finishing. Together, we develop efficient solutions tailored to your optimal process results. All prices are net plus the currently applicable statutory VAT and shipping costs. The images may show the system including accessories that are optionally available and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to offer advice with no obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunication (e-mail, telephone, message portal). In the first step, we will send you a non-binding offer, together with information about our general terms and conditions with imprint and the right of withdrawal, before any purchase/contract is concluded.