Double Sided Squaring/Edgebanding Machines

MAHROS + STEFANI RUNNER + EVOLUTION

Condition: used, machine/vehicle number: 007662, Position 1: Panel Feeding and Loading STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 2: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Crodpfjwuzzfex Ap Hsc Position 3: Double Sided Squaring/Edgebanding Machines STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 4: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 5: Panel Stacking and Offloading STEFANI + MAHROS-EVOLUTION SSB + RUNNER

Condition: good (used), Production capacity of up to 4000 b/h (depending on the format) For formats between 0,25lts up to 3lts Crjdpfswcggvsx Ap Hsc Composed by: • Oven for heating the preforms composed of 6 heating modules with 8 infrared lamps each • Preform transfer Wheel • Two-stage compressed air blowing body, low pressure pre-blowing and subsequent high pressure blowing. • Bottle transfer Wheel • Delivered with pallet turner. DOCUMENTATION AVAILABLE

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30 Crsdpfx Aofi Tg Hsp Hjc

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips/lippings (Min/max) mm 3 / 10 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 - 50 - Without Transmission bar (Master & Slave system) Distance (center-axes) of the Disappearing Dogs (mm) 1080 SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x kW 8) Cjdpjd Nt Rqjfx Ap Herc Free Space (for Milling unit) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 04.1570 + 283.205 Band Pressure zone - Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) speed 30 m/min (0° - 25) Fine Trimming unit 08.055 (2 x Kw 1) / 0° - 30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) with servo-motors Profile edge scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-4 (4 x Kw 0,18) Milling grooving unit 08.190 (1 x Kw 4,5) 90°-180°-270°

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: HEIDENHAIN, controller model: I TNC 530, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,000 h, spindle nose: BT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis continuous mobile gantry vertical machining center, with rotary table (capable of both horizontal and vertical mounting) with a diameter of 550mm. Possibility of pendulum machining (pallet changer type) with dedicated partition. Equipped with BLUM laser control NT tool presetting. Wireless part probe HEIDENHAIN TS 642. Belt-type chip conveyor. High-pressure through-spindle cooling with paper filter. Spindle chiller. Remote HEIDENHAIN handwheel. Credpfoy Diabsx Ap Hoc

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 Working width (min/max) mm 236 / 1300 Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 10 / 50 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling Unit (vertical Joint Trimmers) 08. 0555 max. 3° (2 x 1 kW) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 6 Rough Trimming unit 08. 0555 (2 x 1 kW) max. 3° Fine Trimming unit 08. 055 (2 x 0,66 kW) 30° + 30 m/min Glue scraping unit 08.517 Crodpodh Tfgsfx Ap Hec Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x 0,18 kW) Free space

Year of construction: 2012, condition: excellent (used), Window production line WEINIG consists of: Credpsh H Iyxsfx Ap Hoc Unirex 3000 machining center Univar 15 Unitex 15

Year of construction: 2010, condition: good (used), CNC BIESSE BREMA EKO 902 INSERTS FOR SALE TECHNICAL DETAILS: 3-AXIS C.N.C. MACHINING CENTRE (X-Y-Z) - Integral protection of the operating spindle and the working area on the machine. - Numerical control (control) with BIESSE Works software on Windows. - Vertical positioning of the panels, with N. 2 panel locking clamps. - Panel feed (in X-axis direction, on the lower support with rubber wheels), movement (in X-axis) of the panel/board clamps. DIMENSIONS OF THE PALLETS (WORKING DIMENSIONS): - Length Min mm 160 / Max mm 3200 Codpfx Apshknbrs Hjrc - Width Min mm 35 / Max mm 900 - Wait Min mm 8 / Max mm 80 WORKING GROUPS: - No. 1 Spindle (electro-spindle) vertical ER32 (KW 4,5) with reversing (up to 18000 RPM). - No. 1 Circular saw (for grooves) diameter mm 120 (fixed X axis) - No. 13 Independent vertical spindles for drilling (6 in X-axis + 7 in Y-axis) - Nº 8 Independent horizontal spindles for drilling (3+3 on X axis and 1+1 on Y axis) - Nº 1 Hinge drilling head unit - Total installed power 20 KW AUTOMATIC DOWEL INSERTION GROUP ON BOTH SIDES WITH PRESSURE PUMP TO APPLY THE GLUE.

Year of construction: 1995, condition: excellent (used), The line consists of the following components: 1) Weinig Profimat 23 milling machine 2) Band Feeder KOCH -T-100-B (250x4550) 3) Weinig Uniplan milling machine 4) Band Feeder KOCH T-100-B (250x7050) 5) Tenoning machine KOCH SF -3 5a) Bottom feeding belt for waste (at tenoning machine 300x6050) 5b) Side feeding belt for wastes (at tenoning machine 300x1800) 6) Belt feeder KOCH T-100-B (250x5020) 7) Belt feeder KOCH T-100-A (300x3050) 8) Belt feeder KOCH T-100-B (300x3500) Crsdpfohm Exdjx Ap Hsc 9) Band feeder KOCH T-100-B (300x4530) 10) Weinig U2G milling machine 11) Feeding belt KOCH (250x4050) Line worked very few hours, is like new. Year of production machines included in the line is 1995. In addition, for each machine I add a set of Leitz cutters for the window with a profile of euro 68. The cost of a new line is currently more than 1 million euros.

Condition: good (used), The machine has been overhauled many new parts new cables new hydraulic station The machine has been checked, is functional, We can send a video. Crsdpfxjv Ihdzs Ap Hoc