Used threading machines for sale (255)

Condition: used, ORT RP12 2-roll 12 ton Bodpfx Aeyvk S Ael Isdb Thread rolling machine The machine is in our warehouse, under power

Condition: refurbished (used), Year of construction: 2026, ORT RP30 MS 2-roll 30 tons thread rolling, knurling, small gears 2009 = YOM Electronic overhaul and electronic retrofit with Siemens PLC (2026) The machine is visible working in our warehouse in Gussago BS. Possibility of proof M i m u Machine Tools Power (Ton): 30 Number of rollers: 2 Bdsdeuykz Depfx Al Isb PLC: Yes

Condition: used, Thread rolling machine ORT RP30U 2-roll Bdedpot H Ty Uofx Al Iob 30 ton swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Power (Ton): 30 Number of rollers: 2

Condition: good (used), Thread cutting machine, pipe thread cutter Bdedpob A Iyajfx Al Ieb -for: Pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base Bdedpfeuz If Njx Al Ijb - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Bsdoh A S Htjpfx Al Iodb Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: excellent (used), Tapping attachment Efem size 4 (28550) Mounting MK 3 Taps from M 10 - M 24 automatic changeover right - left Total length 295 mm Diameter 105 mm Bdodpfxouf N S Ae Al Iob

Condition: ready for operation (used), Year of construction: 1985, A thread and worm grinding machine Reishauer AG is available. Grinding length: 450mm, clamping length: 700mm, max. grinding diameter: 200mm, max. pitch: 80mm, max. workpiece weight: 100g, max. lead angle: +/-25°, grinding wheel diameter: 275mm/350mm, speed: 1850rpm. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1600mm, weight: approx. 3400kg. Including oil centrifuge, hood, oil mist extraction and various accessories. The splash curtain is slightly hardened. Documentation available. An on site inspection is possible. Bedpfxox Dm Dns Al Iedb

Condition: ready for operation (used), Year of construction: 1995, Thread Rolling Machine Flat Die TLM RP8 Operational, fully functional Available for any tests c/o H.B.R. srl Ready for immediate delivery. TLM RP8 Informazioni tecniche: Year: 1995 Diameter range: 3 – 8 mm. Shaft length under head: 90 mm. Max. thread length: 52 mm. Dies size:130/115x54 mm. Bdsdpfx Aljyzqzbj Iob Speed: 420 pcs./min. Vibratory feeder Condition: very good, operational Ready for immediate delivery Machinery runs without any problems. Available c/o H.B.R. srl - Italia

Condition: new, Year of construction: 2025, functionality: fully functional, thread length: 12,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 90 mm, spindle diameter: 80 mm, type of input current: three-phase, roll diameter: 250 mm, spindle speed (max.): 50 rpm, spindle speed (min.): 20 rpm, total height: 2,000 mm, total length: 2,400 mm, total width: 2,000 mm, 60 ton hydraulic thread rolling machine with swivel spindles for infeed and thru-feed rolling Download PDF file for photographs Bdodpov Rb Apjfx Al Ijb

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Make: ORT Italia Type: RT 10 Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Min. Threading lenght:2mm Max. Threading length:65mm Pitch / lead: 30mm Shaft Ø: 85 - 135mm Bsdpfx Alox H Rmuo Iedb Length: 1600mm Width: 1400mm Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: not inspected (used), functionality: unexamined, throat depth: 1,200 mm, machine/vehicle number: 94023588, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Reach: 1200 mm MACHINE DETAILS Bdjdpeyn H Rdjfx Al Ijb Dimensions & Weight Dimensions (L x W x H): 1200 x 1000 x 700 mm Machine weight: 80 kg External reference: Pieper - Lot 68

Condition: new, table length 900 mm table width 600 mm table height 700 mm Bdodpfx Alsupxmfs Isb weight of the machine ca. 90 Kg dimensions 0,9 x 0,6 x 0,7 m

Condition: new, thread dia. M3 - M16 metrisch 250 U/min. 0 6 - 8 bar working area max. 1100 mm weight 15 kg dimensions 700 x 280 x 250 mm Pneumatic tapping machine Bjdpfxohiptgj Al Isdb Type with an adjustable angle, horizontal tapping possible Pneumatic tapping machines for M3 - M16 threads, angle adjustable. 8 pcs. quick-change chuck with slipping clutch. Documentation in English! Optional: clamping table with grooves type: FL-WB

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller model: SIEMENS SINUMERIK 810, workpiece length (max.): 830 mm, milling spindle speed (min.): 100 rpm, milling spindle speed (max.): 4,500 rpm, mount diameter: 78 mm, TECHNICAL DETAILS Milling spindle speed range: 100 - 4,500 rpm Maximum workpiece length: 830 mm Maximum workpiece diameter with double tooling: 135 mm Spindle mount: 2 x SK 40 Spindle nose: DIN 55026 Size 5 Mounting diameter: 78 mm Center distance: 135 mm Front bearing diameter: 110 mm Workpiece Slide (X-Axis) Workpiece slide travel: 810 mm Max. feed rate: 6 m/min Clamping surface: 200 x 1,750 mm Tool Post (Z-Axis) Tool slide travel: 120 mm Max. feed rate: 2 m/min Tool post adjustment: 200 mm Tailstock Tailstock quill travel: 100 mm Morse taper: 3 MT Centre height: 260 mm Quill center distance: 135 mm Steady rest through-hole: 40 - 80 mm MACHINE DETAILS Drive power: 5100 W Control system: SIEMENS SINUMERIK 810 Dimensions & Weight Dimensions (L x W x H): approx. 3.20 x 2.66 x 1.76 m Machine weight: approx. 6.5 t Bedjyl U Tujpfx Al Iodb EQUIPMENT Various tool holders Steady rests Centre points, medium Coolant system

Condition: good (used), max. threading capacity up to M 6 with guide cartridge throat 130 mm drive power 0,55 kW dimensions L x W x H approx. 350 x 650 x 750 mm weight approx. 90 kg Accessories / special features: - Threaded guide cartridges: 1 x pitch 0.5 mm 1 x pitch 0.6 mm 1 x pitch 0.7 mm 2 x pitch 0.8 mm 1 x pitch 1.0 mm - Various adjustable working cycles such as: Automatic, foot operation Bdjdpfx Aljnyh Tns Isb Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2003, condition: used, machine/vehicle number: 184323, For sale is a used IXION thread tapping machine BT 30 GL E (BT 30 GLE) suitable for series production or workshop operations. The machine is fully operational; on-site demonstration under power is possible and expressly encouraged. Location: 57439 Attendorn Collection by buyer – forklift available, loading free of charge Delivery condition: EXW 57439 Attendorn Technical Data / Equipment (according to documentation): - Thread cutting capacity: M5 – M30 - Thread depth: 90 mm - Working stroke: 90 mm - Rapid traverse: max. 80 mm - Spindle speeds (5 steps): 160 – 880 rpm - Motor: pole-changeable 1.3 / 2.4 kW, motor speed 700/1400 rpm - Power supply: 400 V, 50 Hz, three-phase (5-wire: L1/L2/L3/N/PE) - Reach: 280 mm - Spindle to table: 220 – 600 mm - Table size: 390 × 420 mm - T-slots: 14 mm Bdodpfoyn Snhex Al Ieb - Column diameter: 120 mm - Total height: max. 2100 mm - Weight: approx. 370 kg Pneumatics / Compressed Air: - Pneumatic rapid traverse - Compressed air unit included External compressed air supply/plant air required on site Coolant system (included): - Coolant/lubricant unit (electrical; tank/pump/hoses/piping as present) Scope of delivery: - IXION BT 30 GL E / BT 30 GLE as shown - Coolant system included - Available documentation Legal Notice: Sale exclusively to businesses as defined by § 14 BGB (B2B). Sale with exclusion of liability for material defects. No warranty, no returns. Sale as inspected/demo’d. Subject to prior sale and errors.

Condition: used, Threading machine, pipe threader, Ridgid 300, used machine Manufacturer: Ridgid Type: 300 Overall dimensions: Width: 1180 mm Depth: 1250 mm Height: 1500 mm Electrical data: 230V Functions: Thread cutting, cutting to length, deburring Bjdpjybbamjfx Al Ijdb

Condition: good (used), Thread cutting machine, pipe thread cutter -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts Bdjdpfxex I Agpj Al Ieb -Speed: 40 rpm -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm -Weight: 46.6 kg

Year of construction: 2000, condition: excellent (used), Thread cutting machine make ROTHENBERGER TYPE:3S-G year of construction ca.2000 Without cutting head Bdedpfx Aomn Thhsl Iob with pipe cutter and end burr device. Runs with V230 current. In top condition, like new.

Condition: good (used), Year of construction: 1990, Thread cutting machines with accessories Manufacturer SONE Type: 2000 . Bdedpfx Alevk D Rps Isb 230V .

Condition: new, Hydraulic threading machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm thread M 5 - M 24 Working range 2050 Rmax. working height 920 mm table surface 900 x 700 mm oil capacity 100 l Motor power 3,0 kW Weight:220 kg Bdsdpfx Ajkhmgijl Isb Equipment: Hydraulic threading machine Incl. machine base with clamping disk Mobile Hydr. manometer Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: new, Bernardo TM 16 BLO/ R 1100 Electric thread cutting machine Technical specifications Tapped holes* M3 - M16 Speed max. 120 - 325 rpm Adjustable angle 0° - 90 Max. Working radius R 1100 mm Quick change chuck DIN 371: M3 / M4 / M5-6 / M8 / M10 DIN 376: M12 / M14 / M16 Motor power 600 W Voltage 230 V weight approx. 26 kg * Material strength 400 N / mm2 Scope of delivery Operation via touch screen Digital drilling depth display Micro spray system Blow-out device Quick change chuck Quick change chuck according to DIN Electric motor 90° angle adjustment Mounting flange Features Standard with micro-spray system for constant cooling and minimal cooling lubricant consumption Including blow-out device for removal of chips, thus optimal view of the drill hole Including quick-change chuck for the use of taps for through and blind holes Swiveling motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed right angle (90°) High productivity, significant time savings compared to manual thread cutting Quick-change chuck with integrated slip clutch prevents tap breakage Including swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Bjdpfx Aljpag Npe Iodb Price: Base 900 x 600 mm with 2 drawers for TM series 830,00

Condition: new, Bernardo TM 36 BLO/ R 1200 Electric threading machine Technical specifications Threaded holes* M5 - M36 Tool holder GT 24 Speed max. 30 - 150 rpm Adjustable angle 0° - 90 Max. Working radius R 1200 mm Quick-change chuck DIN 376: M5-6 / M8 / M10 / M12 / M14 M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor power 1200 W Voltage 230 V Weight approx. 35 kg * Material strength 400 N / mm2 Scope of delivery Operation via touchscreen Digital drilling depth display Micro spray system Blow-out device Quick-change holder Quick-change chuck according to DIN Electric motor 90° angle adjustment Mounting flange features With micro-spray system as standard for constant cooling and minimum cooling lubricant consumption Includes blow-out device for removing chips, providing an optimum view of the drill hole Bsdpfx Aljpag R Ro Iodb Includes quick-change chuck for using taps for through holes and blind holes Swivel motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed to be at right angles (90°) High productivity, significant time savings compared to manual tapping Quick-change chuck with integrated slip clutch prevents the tap from breaking Includes swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series 830.00 € plus 19% VAT

Condition: new, Hydraulic tapping machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm Thread M 5 - M 24 Working range 2050 Rmax. Working height 920 mm Table surface 900 x 700 mm Oil capacity 100 l Motor power 3.0 kW Weight: 220 kg Equipment: Hydraulic tapping machine Incl. machine base with clamping disk Mobile Hydr. pressure gauge Infinitely variable speed adjustment from 0 - 600 rpm Bjdpfxotbawke Al Isdb Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24