CNC turning and milling center

Mazak Quick turn nexus 350-2-MY

Condition: ready for operation (used), Year of construction: 2023, operating hours: 154 h, travel distance X-axis: 215 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 605 mm, total height: 1,725 mm, total width: 1,690 mm, overall weight: 4,650 kg, controller manufacturer: MAZATROL, controller model: SMOOTH Ez, number of axes: 3, This 3-axis Mazak QTE-200MY SG was manufactured in 2023. It features a maximum swing diameter of 695 mm, a standard cutting diameter of 235 mm, and a maximum turning diameter of 340 mm. The main spindle operates at speeds up to 5,000 min-1, with a motor power of 15.0 kW. It includes a 12-position turret and rapid traverse rates on the X, Y, and Z axes are 30, 10, and 30 m/min respectively. Contact us for more information about this machine. Additional equipment • Transformer for Europe (CE) • Roller guide with spherical roller bearings • SD memory card I/F + USB memory I/F • 1 Set of control keys • Foundation kit (steel plates) • CE Marking (With noise filter) • C-axis Positioning 0.0001° Increment • 12-Position Turret • Y-Axis Control • Interface bar feeder Extra Information Automatic part trapper High pressure cooling Preparation for chip conveyor 8" Open chuck Measuring arm Signal tower Rotary center Chain chip conveyor with side discharge Cylindrical and polar coordinate engraving function Automatic pecking cycle with load detection Quick-change cutter holder system Bar diameter Workpiece Maximum swing diameter: 695 mm Standard cutting diameter: 235 mm Maximum cutting length: 535 mm Maximum turning diameter: 340 mm Maximum bar diameter: 65 mm Dksdpfox D R Svex Ag Rek Maximum chuck weight: 200 kg Maximum workpiece weight: 500 kg Distance between spindle nose and end of workpiece: 81 to 686 mm Turret Number of tool positions: 12 Tool size (External turning): 25 mm Tool size (Internal turning): 40 mm Tool size (Driven drill): 20 mm Tool size (Driven end mill): 20 mm Tool size (Driven tap): M20 Indexing time 1 step: 0.23 s Indexing time full revolution: 0.63 s Tail Stock Center bore (morse taper): MK No. 5 Tailstock travel (body movement): 565 mm Maximum thrust: 5000 N Tools Milling spindle power (continuous power): 3.7 kW Milling spindle power (40% ED): 5.5 kW Maximum milling spindle speed: 4500 min-1 Minimum milling spindle speed: 20 min-1 Media Tank capacity: 225 L Coolant pump: MTA70H-250 Power: 0.25 kW Compressed air flow rate: 75 to 370 L/min (ANR) Dimensions Machine Depth 2785 mm

Condition: excellent (used), Year of construction: 2001, x-travel 185 mm z-travel 360 mm b-travel 460 mm control Mazatrol 640 T Maximum swing diameter 550 mm Maximum turning diameter 280 mm workpiece weight max. 200 kg bar capacity 51 mm main spindle speed 35-6000 U/min milling head speed 25-4500 U/min rapid power traverse in X-and Z direction 30/33 m/min Rapid traverse B axis 30 m/min tool turret 12 Plätze weight of the machine ca. 4100 kg Capacity: Chuck size: 6 inches Max. swing diameter: 550 mm Standard turning diameter: 221 mm Max. turning diameter: 280 mm Max. bar capacity: 51 mm Distance between spindle nose and turret edge: 80–535 mm Main spindle: Speed: 35–6000 rpm Dsdpjyukf Ssfx Ag Rjkk Spindle bore: 61 mm Counter spindle: Speed: 35–6000 rpm Spindle bore: 52 mm Turret: Number of tools: 12 pieces Tool size: External turning tool: 20 mm Internal turning tool: 32 mm Milling drill: 16 mm Milling tap: M12 End mills: 16 mm Milling spindle speed: 25–4,500 rpm Equipment/Accessories: Tool holders Tools Powered tools Turning tool holders Coolant system Chip conveyor Documentation

Year of construction: 2023, condition: ready for operation (used), number of axes: 5, This 5-axis Mazak INTEGREX j-200S was manufactured in 2023. Ideal for complex machining tasks, it offers precision and versatility in a compact design. Consider the opportunity to buy this Mazak INTEGREX j-200S. Contact us for more information. Additional equipment • 36 tool change • Includes tailstock function Machine Benefits Technical Machine Benefits • The machine has a 36 mm tool • A 12 to 15 bar flushing system • Tailstock function • Cooling water cooling • Bar puller function • Milling spindle 12000 rpm • Main and counter spindle • 1 degree swivel b-axis Extra Information OPM probe tool measurement Dedpfxjyaqvue Ag Rekk Optional: Capto C6 tool holders

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, spindle motor power: 26,000 W, total height: 1,840 mm, overall weight: 5,100 kg, controller manufacturer: MAZATROL, number of axes: 3, This 3-axis Mazak Quick Turn NEXUS 200MS was manufactured in 2005. It features a maximum turning diameter of 380 mm, main spindle speed up to 5000 rpm, and a sub-spindle speed of 6000 rpm. The machine includes a Mazatrol 640T Nexus CNC control and has a robust design with dimensions of 2765x1780x1840 mm, weighing 5100 kg. If you are looking to get high-quality turning capabilities consider the Mazak Quick Turn NEXUS 200MS machine we have for sale. Contact us for more information. Djdpsx D Rmtofx Ag Rjkk Machine Benefits Technical Machine Benefits • Maximum turning diameter: 380 mm • Maximum bar diameter (main spindle): 65 mm • Maximum bar diameter (sub-spindle): 42 mm • Distance between spindles: 580 mm Extra Information Machine has only worked in small batch 1-shift production. Dimensions Machine Depth 2765 mm

Condition: used, Year of construction: 2004, functionality: fully functional, RS125 Friction Welding Machine, max. upsetting force 190 tons, KUKA friction welding machine. Modernized by the manufacturer KUKA in 2016. This machine is currently being fully overhauled by us. Equipment: servo hydraulics, facing unit, new steady rest, 2/3-jaw chuck, 'positioned welding' possible, e.g., for drive shafts. The friction welding machine is currently in use in our production for manufacturing hydraulic piston rods, aluminum-brass connections, production of small and large thread taps, manufacture of pressure rollers, etc. You are welcome to inspect this machine. Dsdpfx Ageq Aurvs Rekk

Condition: good (used), Year of construction: 1993, Tool holder SK40, speed range 20-4000 rpm, clamping area 1.100 x 600 mm Djdpslcbggsfx Ag Rskk

Condition: used, Year of construction: 2023, x-travel 3000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 15 kW distance spindle centre table top edge 140 - 860 mm table load 2500 Kg rapid travel x/y/z 50 m/min table width 3500 mm table length 820 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm Dsdpfx Agoyvvluo Rjkk tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 500 l total power requirement 46,7 kW weight of the machine ca. 15,4 t dimensions of the machine ca. 5,3 x 3,6 x 3,3 m Standard machine including the following optional extras: - Provision for dual oil mist extraction - Air cooling via the rotating milling spindle - 48-tool magazine - Pulse handwheel - 3-colour LED signal light - Additional work area lighting - Air blow-off device on the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Provision for MAZAK Monitoring - Chip conveyor with left-hand ejection (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with automatic chip breaking - Synchronous thread cutting - Rapid traverse with constant angle of inclination STANDARD ACCESSORIES Adaptation for the European market USB port (1 port) Mazak standard colour Work area lighting SAFETY FEATURES Operator door with interlock switch Work area cladding The splash guard enclosure encloses the work area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply via spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of high-quality components. FACTORY AUTOMATION Automatic start/stop and warm-up function Automatic activation of a warm-up via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection NUMERICAL CONTROL Horizontally adjustable NC control panel Relocation Detector Mazatrol SmoothG control 19" colour LCD screen (touch screen) Mazak Tornado tapping/drilling cycle (Mazatrol) EIA/ISO input function Tool path verification in the background 3D coordinate conversion Shape compensation for rotating axes Mazacc-2D software (contour correction) Mazacc-3D software package MAZACC-3D high-speed software package (NO456) is additionally required. Control system with high smoothing Interface for LAN SD memory card interface Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High-precision control for finishing - Seamless corner point control - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse paths, rounding function Absolute positioning system - All dimensions, weights and performance specifications are subject to change - - Used machine without warranty - - Subject to prior sale -

Condition: used, Year of construction: 2012, turning diameter 203 mm turning length 300 mm Dkjdpfxjynbd Ej Ag Rsk control Mazatrol Smart Distance spindle end - turret 99-434 mm max. turning diameter 280 mm bar material dia. 51 mm travel -x axis 200 mm travel -z axis 340 mm spindle turning speed range 35 - 6000 U/min rapid traverse X-axis 33 m/min rapid traverse Z-axis 36 m/min spindle bore 61 mm Tool turret 12 -fach turning tool - shaft cross cut 20 Boring bar- Ø 32 mm workpiece weight 150 kg spindle nose A2-5 taper in tailstock-quill MK4 Travel- tailstock 350 mm total power requirement 16,3 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1,9 x 1,6 x 1,8 m Special accessories: Autom Tool Eye Spindle orientation Signal light Additional coolant nozzles above the chuck Automatic switch-off Interface for bar feed Automatic parts catcher Ø 51 x L:100 x 2.5 kg Workpiece conveyor for automatic parts catcher with workpiece tray Chip conveyor, side ejection Includes: Automatic short bar loading magazine LNS QUICK LOAD SERVO 80_S2 Diameter range: 6 - 80 mm round and hexagonal material Bar lengths: 350 - 1600 mm, however max. headstock length /UVV Weight max. 67 kg / bar Burr-free bars or bar sections Depth 600 mm for holding bars Input voltages from 200 – 460 volts / operating voltage 24 V DC, LNS control programmed on SIEMENS STEP 7 PLC, flexible control panel with large screen, user guidance via symbols for easy operation and adjustment. Device cover with 2 viewing windows made of Plexiglas.

Condition: good (used), Wachtel Infra bakery oven – used – year of manufacture 2008 – surface area 8 sqm – 4 chambers of 1.2 x 1.6 m – manual control – steaming for each chamber – oven from production – good technical condition – collection from warehouse – price on request Dksdpsx Hgxyefx Ag Rek

Condition: excellent (used), Year of construction: 2011, CNC Lathe with y-axis MAZAK - QTN 250 MY MACH-ID 9483 Make: MAZAK Type: QTN 250 MY Control: Mazatrol Matrix Nexus Dkedpfxsyyxzmj Ag Rjk Year: 2011 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!