Welding set

Messer Griesheim EuroTig-25

Condition: repair required (used), Fehlmann Picomax 60 M (5-axis universal milling machine) with Heidenhain TNC 426 x-axis 500 mm y-axis 350 mm z-axis 610 mm Motor spindle 18,000 rpm Power 10.2 kW 24-position tool changer Weight 3,200 kg with 4 axes SK 30 tools Gedpfswmwrdox Al Sokc approx. 40 tool holders The machine has the following problems: - Heidenhain 430 control system is defective (booting up is not always possible, crashes during machining)

Condition: excellent (used), 3-phase DC spot welding machine DALEX, Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Gkjdpfx Aljhmvawo Sjc Secondary open-circuit voltage: 4.72 V Electrode force: 100-600 daN Arm reach: 550 mm with mounting control cabinet according to VDE 0100 Main switch Synchronous welding control 8033 Weight: 740 kg

Year of construction: 2000, condition: used, TIG welding machine, DC, 380 volts, for stainless steel. Arkoquad 220, 40% duty cycle at 220 amps, 10% duty cycle at 140 amps, with torch. Ground cable, pressure reducer, water cooling. Gksdpogt Auuefx Al Sec

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: EC1606, grinding length: 1,200 mm, grinding width: 500 mm, grinding wheel diameter: 400 mm, distance table to spindle center: 700 mm, grinding wheel width: 50 mm, overall weight: 6,100 kg, grinding spindle speed: 1,500 rpm, space requirement height: 2,600 mm, space requirement length: 4,600 mm, space requirement width: 2,200 mm, Like-new, lightly used surface grinder. In very good condition. Godpfx Aey Rxuhjl Sokc Includes digital display on the Y-axis (SINO SDS6).

Condition: used, Year of construction: 1968, roll diameter 500 mm throat 1050 / 485 mm workpiece height 300 mm saw band length 3920 - 4050 mm Gkjdsiqp Eropfx Al Ssc cutting speed 15 - 940 m/min table height 1040 mm table surface area 750 x 800 mm Table tiltable 15 Grad total power requirement 4,0 kW weight of the machine ca. 1750 kg dimensions of the machine ca. 2100 x 1000 x 2100 mm - Unique mitering range left/right up to 30° acute angle - Mitering adjustment via lockable detent every 15° - Adjustable saw blade for optimum cutting angle - Hydraulic clamping device on both sides - Electric blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating ball bearings - Additional table 450 x 450 - Machine light

Condition: good (used), Year of construction: 1991, pressure 300 t chamfer lenght 4100 mm distance between columns 3710 mm stroke - stepless adjustable 250 mm column arm 330 mm dayligth 500 mm table height 940 mm table width 250 mm working feed 7.0 mm/sec return speed 90.0 mm/sec Control konv. operating pressure max. 305 bar voltage 380 V total power requirement 22.5 kW weight 25200 kg range L-W-H 4320 x 2100 x 3370 mm well-maintained condition (!!) - in checked condition - machine video - ?v=rPOBwTfVReo Equipment: - simple, conventional hydraulic press brake - swiveling control panel, left front - electro-motoric back stop (X axis) * adjustment via front control panel (button) * with analog position display * fine adjustment via handwheel, front - with 3x stop fingers, manually adjustable - electro-motoric depth adjustment (Y1+Y2 axis) * with analog position display - 1x split set of 85° deer foot upper tool - 1x MultiV - universal die block, with several V-openings Godpfxexab I Ts Al Sskc - 2x front, stable support arms - 1x freely movable double foot switch - 1x freely movable 2-hand control - side safety device (swivelling doors) - rear safety device (sliding door) - original operating instructions

Condition: like new (used), Year of construction: 2008, 15 MVA oil transformer, with conservator, Buchholz relay, air dehumidifier, tap changer; Siemens, 2008, connection group Ynd5, complete transformer documentation available Gsdeugg Dfopfx Al Sjkc

Condition: used, Technical details: power consumption: 350 A Godsu Nwdkjpfx Al Sskc total power requirement: 17,5 kVA weight of the machine approx.: 58 kg dimensions of machine: 0,6 x 0,35 x 0,5 m Welding rectifier/inverter with trolley MIG/ MAG:40A / 14V up to 350A / 31,5 V TIG: 10A / 10V up to 350 A E-welding: 15A / 20,5V up to 350A / 34V Voltage U1: 380 - 415V Cooling type: F (water cooled) Protection class: IP 23 Without hosepackage and welding gun! *

Condition: excellent (used), Year of construction: 2004, Carl Cloos GLC 503 Quinto SD welding machine. A total of 4 units available. Year of manufacture: 2004-2004-1999. Price refers to 1 unit. Gkedpjtkuk Rjfx Al Soc

Condition: new, Year of construction: 2026, Three-phase powered positioner Table and arm rotation using hydraulic turntables Arm height adjustment using a hydraulic cylinder Control of functions on the positioner housing Useful for positioning components during: welding cleaning assembly Increases work efficiency by up to 40% The ability to rotate without limitations in 2 axes, and with additional vertical and horizontal movement, allows for any positioning of the clamped object (including upside down). The 3-axis positioner provides a significant improvement in working conditions compared to traditional rotary-tilting positioners (optimal object positioning, easy operation). Advantages and benefits: For the employer: Increased work efficiency by up to 40% through optimal object positioning - resulting in a short payback period for the device Increased production efficiency without requiring additional space in the production hall Improved quality of welded joints - always possible to weld in the downhand position The robust design of the device ensures long-lasting, trouble-free operation For the operator: Ensures an ergonomic working posture Minimizes the risk of accidents - no need to change the object clamping Eliminates work interruptions caused by waiting for a crane Easy assembly and operation Full automation of welding is possible by using Kawasaki welding robots. Gksdpfohtq Nzex Al Ssc Our offer also includes positioners with a robot and an integrated control system. ADDITIONAL OPTIONS: REMOTE CONTROL WITH CABLE FOR POSITIONER OPERATION FOOT PEDAL WITH CABLE FOR TABLE ROTATION CONTROL SMOOTH ADJUSTMENT OF TABLE ROTATION SPEED AND ARM ROTATION SPEED CONSTANT TABLE ROTATION FUNCTION ARM LENGTH AND SHAPE TABLE SIZE AND SHAPE ROTATIONAL MASS We can manufacture a positioner according to individual customer specifications.