Lathe cycle-controlled

Monforts KNC 5 1000

Condition: used, Year of construction: 1999, centre height 255 mm centre distance 1080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1000 mm spindle taper KK 8 DIN 55027 control Sinumerik 810 D SIEMENS Hodpoqzm Ngofx Al Aeu bed width 360 mm spindle bore 70 mm turning speed range 2 - 2800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder MULTIFIX Typ B / CAPTO drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m chip conveyor 4,00 x 0,40 x 1,50 m - Serial-No.: 346 / 03 - control: SIEMENS Sinumerik 810 D - quick change tool holder MULTIFIX - coolant equipment - machine lamp

Year of construction: 1971, condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 Hodpfx Alshpqqus Asu -WAG 718- Manufacturer: Arthur Klink Type: RIW 16 x 1800 Year of manufacture: 1971 Max. Tractive force: 16t Max. Stroke: 1800mm Max. Cutting speed: 7m/min Max. Return speed: 25m/min Max. Tool diameter: Ø 95mm Weight: 4,8to

Condition: used, Year of construction: 2001, turning diameter 500 mm turning length 1000 mm control MONFORTS CONTROL control SYSTEM EURO TURN turning diameter over bed slide 290 mm spindle bore 70 mm spindle turning speed range 3 - 2800 U/min spindle power 15 kW Hsdpfx Aley Nnw As Aou max. torque on the spindle 1530 Nm spindle head DIN 55027 Gr. 8 feed power X/Z axis 11300 N rapid travel - longitudinal/face 10 / 5 m/min bed width 360 mm travel of cross-slide 265 mm upper slide travel 140 mm turning tool - shaft cross cut 32 x 25 mm tailstock quill diameter 80 mm tailstock quill stroke 160 mm tailstock taper MT 5 weight of the machine ca. 3,1 t Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant

Condition: used, Year of construction: 2003, centre height 255 mm centre distance 1.080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1.000 mm control EuroTurn spindle bore 70 mm spindle taper KK 8 DIN 55027 3-jaw-chuck diameter 250 mm bed width 360 mm turning speed range 2 - 2.800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder PARAT Gr. 2 drive capacity - spindle motor 11,0 kW Hsdpfx Aowizltol Aeu taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m - Serial-No.: 495 / 03 - control: EuroTurn - quick change tool holder PARAT - coolant equipment - machine lamp

Condition: used, Year of construction: 2009, greates pass round over bed 640 mm swing diameter over face slide 435 mm Hodpjzaf Hnefx Al Aeu control SIEMENS - 840 D turning speed range 3 - 2.500 U/min centre distance 2.000 mm spindle bore 70 mm spindle diameter in front bearing 100 mm Lathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 ti The machine is in good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DUS630ti | DUS 630ti | DUS 630 ti

Condition: used, Year of construction: 2000, Technical details: turning diameter: 800 mm turning length: 2965 mm max. turning dia. over saddle: 520 mm spindle bore: 92 mm turning speed range: 3 - 1800 U/min spindle head: Größe 11 total power requirement: 37 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 5,2 x 2,2 x 1,9 m Teach In Control MTC-K 3-jaw chuck ROTAS Dia. 400 mm face plate RÖHM Dia. 630 mm 4-station toolholder system PARAT 1 fixed steady coolant attachment and chip conveyor * Hodpfxjxxig Uo Al Aou

Condition: good (used), Year of construction: 1995, Description Control Sinumerik 810M Spindle speed 5000 rpm Turret head 12 - position Hodpovt Amujfx Al Aou Table clamping surface length 850 mm, width 325 mm Very good condition, regularly serviced. Operating instructions German Number of axes 3 (X, Y, Z) Travel path X 420mm, Y 330mm, Z 240mm Control: Sinumerik 810 M Max. spindle speed 5000 rpm Automatic tool changer for 12 tools SK40 holder Coolant system

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm Hjdpfxsudi Uns Al Aou MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories Hodpsr A Hcbsfx Al Aeu - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Condition: good (used), We are offering an exceptionally good precision lathe. This machine is probably the best German-made lathe in its class ever built. BOHEHRINGER precision lathe, model DUE 630 Year of manufacture: 1991 Serial number: 1032.1239-08 Center height: 320 mm Swing diameter over bed: 640 mm Hodpfxszlm Ucj Al Aju Distance between centers: approx. 1,200 mm Effective turning length: approx. 1,000 mm Bar capacity: 82 mm Spindle head: DIN 55022, size 8 Drive power: 24 kW Max. torque: 2,000 Nm 24 speeds: 9 – 1,800 rpm 60 cross feed rates: 0.03 – 28 mm/rev 60 longitudinal feed rates: 0.06 – 56 mm/rev Footprint: L x W approx. 4,000 x 1,525 mm Weight: approx. 4,500 kg Accessories: - 3-axis digital display HEIDENHAIN - Parat tool holder including 4 holders - Coolant system - Chip guard back panel - 3-jaw chuck T 315 mm including jaws - Roller strip cover for lead screw support to the bed - Machine light - Operating manual - Wiring diagram - Rapid traverse in longitudinal and cross slides Condition: The machine has been completely technically inspected and can be inspected under power if desired. The gearbox runs very well. The bed guides are also in good condition.