Used 3 Axis Vertical Machining Center for sale (85,189)

Condition: good (used), Year of construction: 2011, Haas VF 3 optionally with automation, Year of manufacture 2011 / Automation 2005, Gusdpfxjxltfue Ag Nsh Haas control, Travel X/Y/Z 1016/508/635 mm, 40-position tool changer, BT 40 spindle taper, Spindle speed up to 10,000 rpm, Tool measurement, 3D probe, Automation interface, Automatic door, Oil mist extraction, Internal coolant supply, OPTIONAL WITH AUTOMATION: 3-axis robot, System 3R SWE, Year 2005, 1 magazine – 20 pallets, 20 pallets System 3R GPS 240, Clamping plate 20 – M 10, Modular vise/clamping block, fixed block unit, Setup station, Zero-point clamping system 3R GPS 240,

Condition: excellent (used), Year of construction: 2022, Table size 600 x 500mm diameter, table load 400 kgs, Traverses XYZ 600 x 500 x 500mm, B axis -5/+110 degrees, C axis 0.001 degrees Rapid feedrates 80m/min, 60 station toolchanger, spindle taper HSK 63, spindle speed 20,000rpm, Gusdpfx Aew Nq E Ujg Nsh Siemens 840D Ergoline control, swarf conveyor, Through Spindle Coolant,

Condition: ready for operation (used), Year of construction: 2007, Haas VF-4SS HE Milling Machine with HRT310 Year of manufacture: 2007 X-axis: 1270 mm Y-axis: 508 mm Z-axis: 635 mm Table size: 1,321 x 457 mm Maximum table load: 794 kg Spindle taper: ISO SK 40 Spindle: 12,000 rpm with 22.4 kW Through-spindle coolant (IKZ): 21 bar Programmable coolant nozzle Additional filter Chip conveyor spiral 24+1 tool changer High-speed machining Portable control panel VQC-V programming support G/M codes RS-232 and USB interfaces Coordinate system / scaling User-defined macros 4th axis preparation HRT 310 CNCB HTS9 manual tailstock Machine weight approx. 6.3 t The machine can be inspected under power by arrangement near Bielefeld. Loading can be provided. Buyer is responsible for transport. Technical data, accessories, and machine descriptions are non-binding. Godpfoxit Nuex Ag Njuh

Condition: used, Year of construction: 2016, 5-Axis Working Area: -> X-axis 1500 mm -> Y-axis 1250 mm -> Z-axis 880 mm Feed / Rapid Traverse: -> X-axis 100 m/min -> Y-, Z-axis 100 m/min Axis Acceleration: -> X-, Y-axis 7 m/s² -> Z-axis 10 m/s² -> Jerk 150 m/s³ Table Load Capacity: -> Max. weight 400 kg Spindle: -> Tool holder HSK 100 -> Speed range 10,000 rpm -> Power (S6/40% duty) 40 kW -> Max. torque 175 Nm Tool Magazine: -> Positions 36 -> Max. tool length 520 mm -> Max. tool diameter (with free adjacent slot) 205 mm -> Max. tool weight 20 kg -> Total load 200 kg -> Tool change time 3 s Machine/Asset does not include any product-related tool, fixture or gripper (robot). Guodpfx Aexgn Sleg Noh

Condition: excellent (used), functionality: fully functional, 4 Axis 310 MM Fanuc Control Gjdjwckinjpfx Ag Njuh Table 1300 MM L

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Guedpow Nklhjfx Ag Njh Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, total height: 2,370 mm, total length: 2,760 mm, total width: 2,760 mm, overall weight: 7,300 kg, spindle speed (max.): 12,000 rpm, For sale is a 5-axis machining center from Hermle, model U740. The machine is in excellent condition and immediately available for use, having only been employed for light machining operations. Service history: - 2022: new geared motor - 2023: new timing belt, new ball screw, angular contact ball bearing Technical data: Year of manufacture: 2003 Gujdpfx Ajwhpuajg Noh Control unit: Heidenhain TNC 530 Total spindle hours: 24,601 X-axis travel: 915 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Max. spindle speed: 12,000 rpm Tool holder: SK 40* Tool changer: 16 positions Milling head: -5° to +95° Milling head automatic swivel and clamping Milling table: NC rotary table, 360° Compressed air through spindle center Dimensions: 2,760 x 2,390 x 2,370 mm Total weight: approx. 7,300 kg The offer also includes: Scraper conveyor Heidenhain probe Electronic hand control module Coolant gun Additional service pack installed on the control unit Transportation and loading can be organized on request, at extra cost, Europe-wide. All prices are subject to VAT. On-site inspection by appointment is possible. Please contact us—our team looks forward to assisting you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2022, High-Performance Gantry Machining Center, 3-Axis Only 917 spindle hours (as of July 2025) Manufacturer: HEDELIUS Model: FORTE 65 Single Year of manufacture: 2022 Control unit: Heidenhain TNC 640 F Tool holder: SK40 Operating hours, approx. (as of July 2025): Spindle running time: 917 h Program running time: 1,119 h Machine powered on: 3,675 h TECHNICAL DETAILS: 3 axes Travel range, X, Y, Z axes: 1,320 mm, 650 mm, 600 mm Rapids X, Y, Z axes: 0-40, 40, 40 m/min Spindle power: 29 kW / 183 Nm Spindle speed: 50–14,000 rpm EQUIPMENT: ZeroClamp zero-point clamping system, 6/4-position Forte 65, 120 mm diameter IKZ internal coolant supply with 25 bar Inclined bed band filter system, 900 l LTA 3001 exhaust air filter (1,200 m³/h) Blow-off gun Rinsing gun Infrared receiver M&H 91.40 TNC 640 Guodpfxjw U Egdj Ag Nsh 3D infrared touch probe M&H 25.50 Internal compressed air supply through main spindle via M-function (5 bar) 65-position tool magazine Fixed machine table Scraper-type chip conveyor Direct length measurement systems from Heidenhain Spindle chiller Automatic central lubrication for X, Y, Z axes Work area lighting Precision ground ball screws Control cabinet air-conditioning unit Spindle cooler Coolant supply, semicircular around spindle Original price over €250,000 This used machine can be inspected under production conditions. All information without guarantee – sale subject to exclusion of any warranties or guarantees. Prior sale reserved.

Condition: used, Year of construction: 2011, Weight: approx. 4500 kg Guedpfx Agevvi R Eo Neh Storage location: Nattheim

Condition: like new (used), Year of construction: 2018, operating hours: 2,350 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The used QUASER MV 184 C 4-axis vertical machining center is a medium-sized CNC vertical machining center featuring a cast iron structure and roller guideways for the table. Axis travels: X 1020 mm, Y 610 mm, Z 610 mm; table dimensions: 1200×600 mm, with a maximum load capacity of 500 kg. The machine is equipped with a continuous 4th axis TJR HR 255N with corresponding tailstock, as well as a precision-milled table with T-slots. Godpjxf Nbrefx Ag Nouh Spindle: ISO-40 (DIN 69871) with 10,000 rpm (max power: 18 kW), spindle cooling via dedicated chiller, high-pressure through-spindle coolant, 30-position RANDOM-type tool changer with swing arm, RENISHAW TS 27 tool presetting device, wireless RENISHAW part probe, and belt-type chip conveyor. Year of manufacture: June 2017 (installed in 2018), equipped with FANUC MILL I CNC with color LCD, Manual Guide i software, remote handwheel, USB port, RS-232 serial interface, memory card slot, and FILTERMIST mist extraction unit. The machine is in PERFECT condition with only 2,350 cutting hours, and various tooling options are available as accessories.

Condition: like new (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS CNC Control: MSX 711III MAPPS IV (FANUC) X axis travel (mm): 730 Y axis travel (mm): 510 Z axis travel (mm): 510 B axis travel (mm): +160° / -180° C axis travel (degrees): 360° Number of pallets: 1 Table diameter (mm): Ø500 Table load capacity (kg): 300 Cutting feed rate X/Y/Z (mm/min): 50,000 / 50,000 / 40,000 Rapid traverse max. X/Y/Z (m/min): 50 / 50 / 40 Main spindle speed (rpm): 12,000 Spindle power (kW): 18.5 / 15 Gujdpfxjwv Sguj Ag Noh Spindle taper: BT-40 Torque (Nm): - Tool changer type: Chain Magazine capacity (tools): 61 Max. tool diameter (mm): 90 Max. tool diameter with adjacent stations empty (mm): 125 Max. tool length (mm): 300 Max. tool weight (kg): 8 Coolant tank capacity (l): 750 Through-spindle coolant (bar): Yes EQUIPMENT Rotary table with digital units: Included Work light: Included Through-spindle cooling: Included Electronic handwheel on CNC panel: Included MACHINE DIMENSIONS Length (mm): 2,771 Width (mm): 3,948 Height (mm): 3,264 Weight (kg): 12,400

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) Godjtrhq Hepfx Ag Nouh - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Gusdpfx Ajt Dmlfsg Njh Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed Guarding

Condition: good (used), Year of construction: 1998, Technical data shown on picture. Gjdpsw U Azfofx Ag Nouh Parts shown by hand not come.

Condition: excellent (used), Year of construction: 2012, For sale is a 5-axis machining center from Axa, model VHC 3-XTS. The machine is fully operational and functional, previously used in model making and mold construction—no heavy-duty machining. History: 2018: Spindle overhaul 2018: New spindle drive motor 2020: Spindle overhauled 2023: New ball screw for the Z-axis 2024: Geometry inspection performed Technical Data: Year of manufacture: 2012 Control: Heidenhain TNC 530 Heros 5 Total operating hours: 39,190 h X-axis: 2,600 mm Y-axis: 900 mm Z-axis: 900 mm C-axis: 360° B-axis: ±100° NC rotary table: RTA 4L-800 Measuring system: direct Spindle mount: SK 40 Tool changer: magazine chain, 36 tools Positioning accuracy: ±0.0075 mm Repeatability: ±0.005 mm Max. spindle speed: increased to 12,000 rpm Approval for operation mode 3 is available Machine length: 6,000 mm Machine width: 4,100 mm Machine height: 3,500 mm Required installation area: approx. 10 x 5 x 3.5 m Guedpfjwg E N Rjx Ag Njh Weight: approx. 26 t Features include: hinged belt chip conveyor, 2x hand rinsing guns, electronic handwheel, 3D measuring probe OMP 40 with Renishaw receiver Transport and loading can be organized Europe-wide upon request and at additional cost. All prices are subject to VAT. Viewing possible by appointment. Please contact us—the team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase & sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Condition: as good as new (ex-display), Year of construction: 2023, Control : Heidenhain TNC 640 Travels X : 1,020 mm Travels Y : 520 mm Travels Z : 610 mm Clamping surface (L x B) : 1,160 x 520 Table load : 750 kg Gusdpfxjt Dizvs Ag Noh Spindle Speed : 15,000 rpm direct Tool holder: SK40 (BigPlus) DIN69872 In general Tool changer : 30-stations Machine bed : Meehanite cast Repetitive accuracy : 0.008 mm Equipment Chip conveyor Coolant supply Elect. handwheel high pressure coolant

Condition: excellent (used), Year of construction: 2018, Table size 600 x 500mm diameter, table load 400 kgs, Traverses XYZ 600 x 500 x 500mm, B axis -5/+110 degrees, C axis 0.001 degrees Rapid feedrates 80m/min, 120 station toolchanger, Guodpfx Agjwnpzao Noh spindle taper HSK 63 spindle speed 20,000rpm, Siemens 840D eRGOline control Swarf conveyor. Through Spindle Coolant

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Gsdpovt D D Uefx Ag Neuh Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: excellent (used), X 885, Y 800, Z 500mm, A 30-120dg, C 360dg. HSK 63 Big Plus, 15,000Rpm, ATC 60 pos, Renishaw probe, Heidenhain TNC 530. Gusdpfx Ajwzv Igsg Nsh

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, Vertical milling center Chiron FZ08W Fanuc 21i-M Max RPM: 15,000 rpm High-pressure spindle through-cooling X = 300 mm Y = 250 mm Z = 250 mm The machine was originally supplied with 2 x 4th axis Peiseler RT 100, but the 4th axes have now been removed. Tool interface: HSK 32 ATC: 24 positions Serial: Yrzzng Gsdpfx Agexd T Rzj Neuh Machine is currently in production and can be inspected at any time. The machine is in very good technical condition. I offer a 3-month startup warranty.

Condition: good (used), Year of construction: 2011, operating hours: 25,800 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, total height: 2,270 mm, total length: 3,300 mm, total width: 3,100 mm, rotational speed (max.): 16,000 rpm, overall weight: 6,500 kg, For sale is a 3-axis CNC milling machine from the brand Mikron, model VCE 1000 Pro. The machine is in excellent condition, very well maintained, fully functional, and ready for immediate use. A mountable 4th axis from Lehmann is included in the offer. The machine recently received new guides and a ball screw (KGT) in the X-axis, as well as an overhauled StepTec spindle (unused since refurbishment). Technical data: Control: Heidenhain iTNC530 Gjdpjv Tlf Hjfx Ag Nsuh Year of manufacture: 2011 Control on: 25,800 h Machine on: 24,000 h Spindle on: COMPLETELY OVERHAULED Travel X, Y, Z: 1020, 560, 600 mm Max. distance spindle to table: 735 mm Drive type: Inline motor spindle Max. speed: 16,000 rpm Rapid traverse X, Y: 36 m/min Rapid traverse Z: 24 m/min Tool holder: SK 40 Max. tool length: 305 mm Max. tool diameter: 77/115 mm Worktable: 1000 x 560 mm Max. table load: 1,350 kg Coolant tank capacity: 300 l Dimensions: 3300 x 3010 x 2270 mm Weight: 6,500 kg Integrated belt filter unit Chip conveyor Internal coolant supply (IKZ) 4th axis by Lehmann Transport and loading can be arranged Europe-wide upon request, for an additional charge. All prices are plus VAT. Viewing is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or ways to contact us, visit our website.

Condition: used, Year of construction: 2011, operating hours: 37,463 h, functionality: fully functional, machine/vehicle number: M34216027081EHC, travel distance X-axis: 750 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, table width: 1,000 mm, table length: 510 mm, spindle speed (max.): 15,000 rpm, Hurco VMX 30 T CNC machining center with additional 4th CNC rotary axis Year of manufacture 2011 Serial No. M34216027081EHC Godpswgbfusfx Ag Nouh Frame No. H-30688 Hurco Winmax control system Table size 1,000 x 510 mm 3 axes, X/Y/Z travel 750 x 510 x 510 + 4th rotary axis Max. table load 1,350 kg Max. spindle speed 15,000 rpm Tool holder SK 40, 24-station tool changer, coolant system, chip conveyor

Condition: excellent (used), Year of construction: 2018, operating hours: 6,019 h, XYZ: 350 x 440 x 330mm, 320mm diameter table, Maximum workpiece diameter 320mm, maximum workpiece height 265mm, Maximum table load 100Kgs, Gsdpfx Ajwfgnlsg Nsuh A axis -/+ 115 degrees, spindle speed 18,000rpm, 36 station tool changer, Heidenhain TNC 640, swarf conveyor, high pressure coolant

Year of construction: 2004, condition: good (used), functionality: fully functional, including robot arm FANUC Robot ARC Mate 120iB TECHNICAL DETAILS X-axis: 700 mm Y-axis: 400 mm Z-axis: 360 mm speed: 10.000 rpm Control: Fanuc 16i MB Table diameter: 1400 mm feed X-axis: 10000 mm/min. feed Y-axis: 10000 mm/min. feed Z-axis: 10000 mm/min. rapid traverse: 70 m/min tool holder: Big Plus ISO/Bt/Mk Spindle power: 21 kW Torque (Twin / Single): 120 / 155 Nm number of tools: 2 x 30 tool diameter: 140 mm tool length: 280 mm milling capacity: max. 350 ccm Drill diameter: max. 40 mm Thread diameter: max. M27 Gusdpfx Agel Eykgs Nsh MACHINE DETAILS length: 6000 mm width: 6000 mm height: 2800 mm weight: 12000 kg Total connected load: 55 kVA Total power consumption: 44 kW Voltage: 400 V Frequency: 50 Hz

Condition: excellent (used), Year of construction: 2016, Table size 1200 x 600mm, table load 500 kgs, Traverses X Y Z; 1020 x 610 x 510mm, Gusdeq Tb Uwepfx Ag Njh spindle to table min-max 130 – 640mm, spindle speed 10,000rpm, spindle taper BT40 Big Plus, 24 station ATC, Fanuc oi-MB control, , coolant.