Used 4 Colors for sale (31,281)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Giedpfoguk Dvex Abdel Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 2011, WEISHAUPT WM-G10/A-4; With gas train - Power: 110-1250 kW - Year of manufacture: 2011 Gisdpjwgym Djfx Abdol - Design: ZM

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg Giodpfsl Dw Nxjx Abdol cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Condition: good (used), For sale: individual pieces of original deep hole drilling bits by Botek (Germany) – a renowned manufacturer of precision tools for metalworking. Single-lip drills (single-edge) with internal cooling, made from K15B carbide – very hard and wear-resistant. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B carbide (ultrafine grain) • For steel, stainless steel, aluminum, bronze, and engineering plastics The drills are designed for precise deep hole drilling with high dimensional stability. Applications include the aerospace, automotive, hydraulic industries, and toolmaking. Condition: New and used (pre-owned), but in good technical condition. Some items may require resharpening – an ideal base for professionals. //// PRICE SHOWN IS PER PIECE //// Giodpfxowg R I Eo Abdjl

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, shelf height: 3,500 mm, support length: 2,700 mm, shelf length: 8,500 mm, frame height: 3,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 4, pallet spaces: 108 euro pallets, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Frames bolted, not pre-assembled Giedpfjv Ukz Asx Abdel Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Gisdpfx Asp U Umkobdel

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg Godpfx Abjguk A Hsdeil - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: excellent (used), Year of construction: 2020, 1. Giedpfx Aewgyrtebdol WEISCHAUPT WM-G10/4-A (with gas line) - Power: 100-1100 kW - Model: ZM-LN - Year of manufacture: 2020 2. WEISCHAUPT WM-G10/3-A (with gas line) - Power: 100-1000 kW - Model: ZM - Year of manufacture: 2013

Year of construction: 1980, condition: used, Sharpening TOOL VOLLMER FINZ 4-800 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Giodpecw Dg Defx Abdel Description Comments GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC

Condition: new, Year of construction: 2022, functionality: fully functional, The price is for all together. Ideal for a new start on Screen Printing Art studio Artists The set contains: Gsdpsxwnw Aofx Abdsil 1.SCREEN PRINTING CAROUSELL type X 4 TABLES, FULL AJUSTABLE 2. DRYIER: 3FACE POWER 3.FLASH AUTO: 3FACE POWER ALL ARE NEW , OUT OF THEIR BOXES.

Condition: new, SALES FROM STOCK Loading Capacity: 240 kg Max Platform Height: 4 m Occupants: 1 Platform Dimension: 1.15 x 0.6 m Overall Length: 1.32 m Overall Width: 0.76 m Overall Height: 1.92 m Platform Extension: 0.55 m Extension Load: 100 kg Up/Down Speed: 34/25 sec Turning Radius: 0 Maximum Slope: 1.5°/2° Drive Tyres: 230 x 80 mm Gradeability: 25% Wheel Base: 1.0 m Travel Speed (Stowed): 4 km/h Travel Speed (Raised): 0.5 km/h Battery: 2 x 12 V / 100 Ah Lifting Motor: 24 V / 1.3 kW Drive Motors: 24 V / 0.5 kW Charger: 24 V / 15 A Weight: 660 kg Proportional Controls Automatic Pothole Protection Drivable At Full Height Non-Marking Tyres Automatic Brake System Emergency Lowering System Emergency Stop Button Cylinder Holding Valve Onboard Diagnostic System Gedpeulah Nsfx Abdeil

Condition: good (used), mileage: 827,593 km, power: 375 kW (509.86 HP), first registration: 08/2017, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2017, Equipment: AdBlue, electric window regulation, fridge, power mirror, second fuel tank, Technical information Number of cylinders: 6 Axle configuration Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle 1: Lift axle; Steering; Suspension: air suspension Rear axle 2: Double wheels; Suspension: air suspension Weights Empty weight: 9.011 kg Carrying capacity: 16.689 kg GVW: 25.700 kg Condition Technical condition: good Gjdpfx Aox Tqdgjbdoil Visual appearance: good Additional information Please contact Arie or Pedro for more information

Year of construction: 2013, operating hours: 1,765 h, condition: used, General information Field of application: Grounds care Serial number: 60029 Gjdpfx Ajv Rviwebdjil Technical information Power: 18 kW (25 HP) Type of fuel: Diesel Top speed: 40 km/h Weights Empty weight: 1.075 kg Carrying capacity: 300 kg GVW: 1.375 kg Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: - Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 3.45x1.61x2.08 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), machine/vehicle number: WDB96342610060353 / YA9T6130B03113868 / YAFTLS007G0018594, mileage: 228,326 km, power: 425 kW (577.84 HP), fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 5,250 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: ABS, air conditioning, electric window regulation, onboard computer, parking heater, power mirror, seat heater, Technical information Engine capacity: 15.569 cc GVW: 13.093 kg Drivetrain Make of engine: Daimler AG Axle configuration Axle 1: Tyre size: 385/65R22.5; Suspension: leaf suspension Axle 3: Tyre size: 315/80R22.5; Suspension: air suspension Gedpex R Rypofx Abdsil Axle 4: Tyre size: 315/80R22.5; Suspension: air suspension Interior Steering wheel placement: Left Condition Technical condition: very good Visual appearance: very good Other information Vehicle's outer dimensions: 7,936x2,55x4 Production country: DE Additional information Please contact Matthias Eyckmans, Bart Apers or Jeroen Heindryckx for more information Low hour readings on both tractor head and deepbed trailer.

Condition: used, Year of construction: 2014, Folding machine MBO T700/4 Year: 2014 Description: - 4 page folder - MBO Navigator Feeder - Round pile feeder: R 700 - Pump Buckle folding unit: 1 MBO FP 10 - First buckle folding section with 4 buckle plates - Perforating shaft Gjdpfx Asx Ry U Asbdsil - Anti noise hood(s) - Excluding delivery

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve Gjdpfx Absx R Szzodsil -Adapter sleeve: Morse taper sleeve 16 pieces -Type: IMF CM5/2 6 pieces / IMF CM5/3 2 pieces / MK5/4 8 pieces. -Price/Delivery: complete -Transport dimensions: 340/270/H90 mm -Weight: 18.8 kg

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation Giodpfxexaa I Sj Abdel - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: good (used), three-phase motor, electric motor -Manufacturer: Loher, electric motor type A 100L1A-12/4 -Power: 0.18/0.55 kW -Speed: 465/1475 rpm -Shaft: Ø 28 x 60 mm -Protection class: P 33 Godpfx Abovuzlfodsil -Dimensions: 385/275/H250 mm -Weight: 31.5 kg

Condition: good (used), Year of construction: 1991, sheet width - max. 1010 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded max. 20 Hübe/min cutting angle 1.5 ° work height max. 900 mm Control ELGO back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2200 kg. range L-W-H 1500 x 2155 x 1606 mm from a maintenance workshop good condition (!!) - in checked conditions - machinevideo - ?v=w22S17mfU-A Equipment: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * Includes NC ELGO positioning control "TYP 85" - Electric cutting length limiter - Manual cutting gap adjustment - 1x side stop with scale Gsdpfxoxrgv Te Abdoil - 2x support arms - 1x freely movable foot switch - Original operating instructions * Special accessories included: - Pneumatic holding device for thin sheet metal blanks

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder Gedpfxjv Hawqs Abdoil -Manufacturer: Greif, double grinding wheel type D 20/4 -Grinding discs: max. Ø 250 mm -Motor power: 0.37 kW -Speed: 1400 rpm -Operating voltage: 220/380 volts -Dimensions: 500/310/H315 mm -Weight: 40 kg

Condition: good (used), Three-phase motor, electric motor -Power: 1.5/2.5 kW Giodpjdrnhqofx Abdsl -Speed: 1470/2935 rpm -Shaft: Ø 28 mm -Design: B3 -Protection class: IP 44 -Dimensions: 500/250/H335 mm -Weight: 54 kg

Condition: good (used), 5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve Giedpfx Aeb Nktuebdol -Solenoid valve -Type: CPE18-M1H-5J-1/4 -PN: 2-10 bar -Number: 28 valves available -Price: per piece -Weight: 0.1 kg/piece

Condition: good (used), Geared motor, electric motor, electric geared motor -Speed: 70 rpm -Power: 0.12 kW -Shaft diameter: Ø 20 mm -Design: B3 angle Godpjc R R A Defx Abdsil -Protection class: IP 54 -Dimensions: 305/170/H140 mm -Weight: 9 kg

Condition: good (used), Geared motor, electric motor, electric geared motor -Speed: 3.55 rpm -Power: 0.55 kW -Shaft diameter: Ø 50 mm Gisdpfx Ascmkbcobdol -Design: B5 -Protection class: IP 54/55 -Number: 3x motors available -Price: per piece -Dimensions: 630/300/H270 mm -Weight: 62 kg

Condition: good (used), geared motor, electric motor Godpfx Ajc Sr I Hebdsil -Speed: 66 rpm -Power: 0.55 kW -Design: B5 angle -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Number: 1x motor available -Price: per piece -Dimensions: 420/250/H195 mm -Weight: 20 kg