Used 4 Side Planer for sale (29,431)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. Ksdpfx Aod Tqaleg Nedu The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 2020, 1. Kdjdpfx Agowgyrts Neu WEISCHAUPT WM-G10/4-A (with gas line) - Power: 100-1100 kW - Model: ZM-LN - Year of manufacture: 2020 2. WEISCHAUPT WM-G10/3-A (with gas line) - Power: 100-1000 kW - Model: ZM - Year of manufacture: 2013

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Kedpfx Aji Apuheg Nsdu Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: excellent (used), Masini de rectificat centerless . Diferite dimensiuni si marci . Lichidare stoc . Masina de rectificat bed 5 . Piatra conducatoare de 250 mm . Alimentator automat . Pret 6000 euro . Kdedpew U N Avjfx Ag Nju Masina de rectificat bed 4 alimentator automat , pret 5500 euro . Masina de rectificat heminhausen Sr 4 . Piatra conducatoare de 250 mm , alimentator automat . pret 5500 euro .

Condition: used, Capacity: 80 m/min Planer feed table, tested. At speeds up to 80 m/min. Kdsdpfog S Dm Nex Ag Nsu

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, shelf height: 3,500 mm, support length: 2,700 mm, shelf length: 8,500 mm, frame height: 3,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 4, pallet spaces: 108 euro pallets, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, Kedpfx Aov Ukz Aeg Nodu each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm Ksdpfxjfdkb Ts Ag Njdu - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: excellent (used), Year of construction: 2021, operating hours: 121 h, functionality: fully functional, machine/vehicle number: 320.04.001.21, travel distance X-axis: 5,230 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece height (max.): 105 mm, overall weight: 4,100 kg, FOR SALE: FELDER FORMAT 4 CNC + FELDER RL 350 extraction system including piping and tools (milling cutters) FELDER FORMAT 4 • Type: Profit H10 22 43 c-tech • Serial number: 320.04.001.21 • Year of manufacture: 2021 • Operating hours: 121 hours • Safety system with safety mats • Mobile control panel with screen, keyboard, and mouse • 2 vacuum pumps as standard, each with a nominal capacity of 250 m³ + a special version with a third extraction pump to ensure maximum cleanliness during milling • 8-position tool changer Kdjdpswc R D Eofx Ag Nou FELDER RL 350 extraction system including piping • 3 x 400V 50Hz 15HP 11kW • Maximum flow rate: 8000 m³/h • Nominal flow rate: 20 m/sec, 6920 m³/h • Negative pressure: 2630 Pa • Filter area: 71 m² • Extraction connection diameter: 350 mm • Residual dust content:

Condition: ready for operation (used), functionality: fully functional, 4 printing units 12 " water cooling unit 2 perforated units It is in good condition in production Kodjwhqnzopfx Ag Nsdu

Condition: used, Year of construction: 2011, Technical details: Rated capacity: 63 kVA Revolution per minute: 1500 U / min capacity: 50 (Wärmetauscher) KW type of fuel: (Erd) Gas Number of working hours: 87021 h weight: ca. 2300 kg dimensions L x W x H: ca. 3,0 x 1,0 x 1,8 m CHP compact module (heat exchanger module) soundproofed with electric cabinet Engine: MAN; type E0834 E302; Gas-Otto 4-stroke engine, 1500 rpm; power mech. 54kW, ignition control unit Motortech MIC 500 (MIC 520) Generator: Leroy Somer; type LSA 43.2 8; type output 87 kVA; 1500 rpm; voltage 400V Kodju Nvp Sspfx Ag Nodu Heat exchanger module: Heattransfer, engine cooling water output 46kW; exhaust gas heat output 33kW; total heat output via plate heat exchanger = 79kW Connections for gas inlet, flue gas outlet, condensate drain and heating water on the side. with exhaust gas top *

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Kdjdpfefdkb Usx Ag Nju When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Kdsdpfxsfdkbho Ag Nju - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Kedsd Tbbdspfx Ag Nedu - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) Kdjdpfxjguk Dke Ag Neu - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg Kodpfxsguk Dvs Ag Nsdu - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Kedpfxjguk A Hj Ag Nedu Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: good (used), mileage: 132,911 km, power: 235 kW (319.51 HP), first registration: 03/2019, fuel type: diesel, color: red, axle configuration: 6x2, tire size: 315/70R22,5, fuel: diesel, wheelbase: 4,950 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, loading space width: 2,490 mm, loading space length: 7,910 mm, loading space height: 2,210 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, navigation system, parking heater, tail-lift, traction control, - Digital tachograph - Electric windows - Electric mirrors - Tachograph (recording equipment) - Fixed - Short cab - Tail lift - Central locking Number of axles: 3, Configuration: 6x2, Unladen weight: 10,770 kg, Gross weight: 26,000 kg, Total fuel tank capacity: 350 liters, Fifth wheel coupling: Fixed, Number of differentials: 1, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (recording equipment), Digital tachograph, Air conditioning, Parking heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Colour: Red, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Lane departure warning assistant, Climate control, Seat heating, Bluetooth, Engine power: 235 kW (315 Hp), Fuel: Diesel, Euro: 6, Transmission type: Opticruise, Gearbox manufacturer: Scania, Gears: 12, Power steering, ABS, ASR, Starter battery, System type: ", Central locking, Seating configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Tail lift, Tail lift version: Rear flap, Tail lift capacity: 2,000 kg, Tail lift manufacturer: Bar cargolift, Tail lift material: Aluminium, Tail lift size: 226x251 Transmission Transmission: SCA, 12 gears, automatic Axle configuration Tire size: 315/70R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steering; Tire tread left: 10 mm; Tire tread right: 10 mm Axle 2: Twin tires; Inner left tread: 9 mm; Outer left tread: 8 mm; Inner right tread: 9 mm; Outer right tread: 8 mm Axle 3: Lift axle; Steering; Tire tread left: 10 mm; Tire tread right: 10 mm Dimensions Dimensions (L x W x H): 1034 x 255 x 362 cm Weights Curb weight: 10,770 kg Payload: 15,230 kg Gross vehicle weight: 26,000 kg Ksdpfx Agoxp Eg Eo Njdu Functional Tail lift: Bar cargolift, rear flap, 2,000 kg Loading platform height: 128 cm Maintenance APK (general inspection): valid until 03.2026 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial information Leasing rate: €901 per month (default, 60 months); Please inquire for further information and conditions Identification Registration number: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, production years, and price classes. Why buy from Kleyn Trucks? It’s easy! • Large, fast-changing inventory • Recognizable quality • Good prices • Professional business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates quickly arranged • Professional technical services • The security of 'recognizable quality' • And more.... Visit our website for special offers and a complete stocklist: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Questions...

Condition: excellent (used), Type: ClimeEvent C/2700/70/4/W Weiss Technik ClimeEvent C/2700/70/4/W – High-Performance Climate Test Chamber For sale is a ClimeEvent C/2700/70/4/W climate test chamber, ideal for industrial, research, and development applications. Perfect for demanding temperature and climate testing of large components and assemblies. Technical specifications: - Internal dimensions (H x W x D): 1150 × 1990 × 1200 mm - External dimensions (H x W x D): 2250 × 3800 × 1555 mm - Test chamber volume: approx. 2760 l - Temperature range: –72 °C to +180 °C - Temperature change rate: 4 K/min (heating & cooling) - Temperature uniformity: ±1.0 K to ±1.5 K - Humidity range: 10% – 98% r.h., deviation ±1% – ±3% r.h. - Power consumption: 8000 W (heating/cooling) - Power supply: 500 V - Refrigerant: Eco-friendly R449A/R469A - Air management: Optimized supply and exhaust air regulation - ESD protection: Fully integrated - Software: Compatible with S!MPATI® for test control and documentation Electrical connection: - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 33.0 kW - Rated current: 18.5 A - Test chamber volume: approx. 2760 liters - Weight: approx. 2000 kg For your safety as a buyer, please note the following! The following procedures are carried out on all chambers we offer prior to sale: Kdedpfjxpg U Rox Ag Nsu 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Leak test with certification 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and details subject to change or error!) Further questions can be gladly answered by phone.

Condition: ready for operation (used), Kessler DMQ .4.AFS main spindle motor SN:129850 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos, The agreed sales discounts do not apply to this item. Please ask separately for price,ATTENTION: Please ask separately for packaging and shipping costs! ATTENTION: Please enquire for charges for packing and transport separately! Kdedpfxsi D Iy Ej Ag Nsu

Condition: used, Year of construction: 1994, total width: 1,200 mm, total length: 4,700 mm, total height: 1,600 mm, Weight: 672 kg Kedpfxexbf E Ss Ag Nedu - Main motor power [kW]: 4.5 - Max. cutting length [mm]: 4040 - Max. cutting height [mm]: 150 - Max. saw blade diameter [mm]: 400 - Arbor saw blade diameter [mm]: 32 - Year: 1994 - Documentation available: No - CE marking present: Yes - Serial number: 228822 - Voltage [V]: 380 - Power [kW]: 11.2 - Transport dimensions: 4700mm x 1200mm x 1600mm (l x w x h) - Transport weight [kg]: 672kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 1984, condition: good (used), burnt hydraulic guillotine shear, make LVD, type MVN 25 / 4, year 1984 power 2500 x 4 mm with backgauge with documentation Other accessories: - Conveyor table Kedpeihppxofx Ag Nedu - Lifting table

Condition: used, Used LABOR-PILOT 2000/4 type in stainless steel-NR 03-4470H-Manufactured in 2003-With LABOR PILOT CONTROLLER-3 x 380 Volts-On mobile frame Kdsdpfxoxlgkwj Ag Nou

Condition: good (used), mileage: 268,449 km, power: 309 kW (420.12 HP), first registration: 02/2018, fuel type: diesel, color: white, axle configuration: 8x2, tire size: 315/80R22,5, fuel: diesel, wheelbase: 5,900 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, loading space width: 2,480 mm, loading space length: 7,220 mm, loading space height: 760 mm, Year of construction: 2018, Equipment: ABS, air conditioning, crane, cruise control, traction control, - Digital tachograph - Electric windows - Electric mirrors - Tachograph (control device) - Short cab - PTO (power take-off) - Pump - Central locking Number of axles: 4, Configuration: 8x2, Unladen weight: 16,525 kg, Gross weight: 35,000 kg, Total tank capacity: 400 liters, Number of diff locks: 1, Suspension type: air suspension, Cab type: short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/Cassette, Color: white, Heated mirrors, Rear-view camera, Lighting system: halogen lamps, Speed limiter, Climate control, Bluetooth, Warning lights, Engine power: 309 kW (414 HP), Fuel: diesel, Euro: 6, Transmission type: AS-Tronic, Transmission make: ZF, Speed limiter, Number of gears: 12, Power steering, ABS, ASR, PTO (power take-off), Number of PTO outputs: 1, Starter battery, Pump, Central locking, Seating configuration: 1+1, Seat material: fabric, Seat adjustment: manual, Crane, Crane make: Hiab, Crane year: 2017, Crane lifting capacity: 22,000, Maximum load: 980 kg at 14.7 m, Number of stabilizers: 2, CE certified, Control position: right side operation, Remote control, Crane position: rear-mounted, Extendable: 5x, Hydraulic auxiliary connections: none, Rotator, Pallet hook, HIAB 228ES5 Transmission Transmission: ZF, 12 gears, automatic Axle configuration Tyre size: 315/80R22.5 Brakes: disc brakes Axle 1: steered; left tyre tread: 3 mm; right tyre tread: 2 mm; suspension: leaf spring Axle 2: steered; left tyre tread: 5 mm; right tyre tread: 8 mm; suspension: leaf spring Axle 3: twin tyres; left inner tread: 12 mm; left outer tread: 8 mm; right inner tread: 9 mm; right outer tread: 10 mm; suspension: air suspension Axle 4: lift axle; steered; left tyre tread: 8 mm; right tyre tread: 8 mm; suspension: air suspension Dimensions Dimensions (L x W x H): 1200 x 255 x 367 cm Weights Unladen weight: 16,525 kg Payload: 18,475 kg Gross vehicle weight: 35,000 kg Functional Crane: Hiab, year of manufacture 2017, mounted at rear of chassis Platform height: 134 cm Pump: Yes Maintenance APK (roadworthiness inspection): valid until 01.2026 Kodpfxsww T Ame Ag Nodu Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Financial Information Leasing price: €994 per month (default, 72 months); Please ask for further information and terms Identification Registration: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European makes, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-moving stock • Recognizable quality • Good pricing • Reliable trading • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration swiftly processed • Qualified technical services • The security of 'recognizable quality' • And more.... Please visit our website for...

Condition: new, Kessler DMQ .4.AFB motor, hole spacing of the mounting holes: 248 x 248 mm, Ø drive shaft: 55 mm, unused with traces of storage, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Kedpfx Agsi D Iyzo Nedu

Condition: excellent (used), V. Bandsaw, manufactured by Elektra Beckum, type BAS 315/4 Year of manufacture: 1994 throat 315 mm Saw blade length: 2240mm Voltage: 220V Cutting depth: 170mm Kedpfx Aevbf Svog Nsdu Accessories: Saw bands, length stop, angle adjustment for miter cuts