Used Adk 125 3 for sale (34,802)

Condition: good (used), Year of construction: 1986, DC motor, geared motor, electric motor, DC geared motor -Speed: 200/2000-3000 rpm -Power: 3.2 kW -Design: B3 -Shaft diameter: Ø 50 mm -Protection class: IP 44 Gbjdpfx Abeb A Ixasdjg -Weight: 220 kg

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Gbsdpsx H Rtnefx Abdsg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Year of construction: 2023, operating hours: 218 h, condition: ready for operation (used), Additional Equipment Basic Hardware Package: 1 UV lamp unit Lamp type: H-lamp/mercury / Process chamber throughput height: 70 mm top and 70 mm bottom / Usable working width top: 60 up to 450 mm (3 lamps top) / Usable working width bottom: 60 mm up to 450 mm (3 lamps bottom) / Potential-free contact for switching in of external exhaust system / Machine control, includes industrial PC (EMV-secured) / Password protection/ Monitoring of transport speed / Monitoring exhaust air with separate sensor (safety monitoring) / Main contactor control / Emergency switch control / Inlet height: Standard 950 mm +/- 20 mm / Network connection: Standard Ethernet / Power supply: 3~N, PE 230/400 V, standard 50 Hz / Software languages: Standard German, English, Rumanian, Swedish, Italian, Spanish, Chinese, Hungarian / Manual, mechanical drawings, and circuit diagram via USB-stick (German-speaking area: German, all non German-speaking countries: English) This SMT UV 3/-3 was manufactured in 2023. It features a UV lamp unit with a throughput height of 70 mm, both top and bottom, and a working width ranging from 60 to 450 mm. The machine includes an industrial PC, network connectivity via Ethernet, and supports multiple software languages. If you are looking to get high-quality UV processing capabilities consider the SMT UV 3/-3 machine we have for sale. Contact us for more information about this machine. Gbjdpfxex D Hfxo Abdsg Application Types Other Sheet Metal Machinery

Condition: used, Technical details: center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm hobbing length: 2000 mm number of teeth: 2 - 50 feed:: 0,023 - 5,17 / mm/min module max. : 8 / 12 spindle bore diameter: 102 mm workpiece rpm : 18 - 224 U/min tailstock quill adjustment: 100 mm Gbsdjv U T Dyspfx Abdeg total power requirement: 9,5 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,6 x 2,1 x 2,0 m

Condition: excellent (used), axle configuration: > 3 axles, first registration: 02/2007, loading space length: 13,230 mm, loading space width: 2,520 mm, loading space height: 2,600 mm, total length: 13,230 mm, total width: 2,520 mm, total height: 2,600 mm, suspension: air, tire size: 275/70-R22.5, wheelbase: 7,970 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional Options and Equipment = - BPW axles - EBS - Air suspension - Spare wheel - Drum brakes - Central lubrication = Remarks = Very nice 2007 NOOTEBOOM OVB-73-04 4-axle ballast trailer. Axles 2, 3 and 4 are hydraulically steered (including wired remote control), BPW axles with drum brakes, hardwood floor, 2 x 10 stake pockets + 13 stakes, 2 x 5 lashing rings, central lubrication, 3" kingpin, air suspension. Unladen weight: 11,400 kg. Gross vehicle weight: 71,400 kg. Twin tyres with 275/70 -R22.5 tires (L: 11/8, 7/13, 12/12, 10/12 mm; R: 12/12, 13/12, 12/11, 12/6 mm). Belgian registration with valid technical inspection until 13.02.2026. = Additional Information = Axle configuration Tire size: 275/70-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin wheels; Max. axle load: 11,600 kg; Tire tread depth left inner: 50%; Tire tread depth left outer: 70%; Tire tread depth right inner: 75%; Tire tread depth right outer: 75% Rear axle 2: Twin wheels; Max. axle load: 11,600 kg; Steering axle; Tire tread depth left inner: 45%; Tire tread depth left outer: 80%; Tire tread depth right inner: 75%; Tire tread depth right outer: 80% Rear axle 3: Twin wheels; Max. axle load: 11,600 kg; Steering axle; Tire tread depth left inner: 75%; Tire tread depth left outer: 40%; Tire tread depth right inner: 70%; Tire tread depth right outer: 75% Rear axle 4: Twin wheels; Max. axle load: 11,600 kg; Steering axle; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 40%; Tire tread depth right outer: 75% Weights Gbedsxuu Ayspfx Abdeg Unladen weight: 11,460 kg Payload: 59,940 kg Gross weight: 71,400 kg Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for further details.

Condition: ready for operation (used), Röhm ZFM - 200/3 = No.509-04 power chuck, with assembly tool and mounting screws, in original packaging, absolutely new condition Gedpei Ec Dmofx Abdobg

Condition: good (used), Year of construction: 1992, DC motor, geared motor, electric motor, DC geared motor -Speed: 200/2000-3000 rpm -Power: 3.2 kW -Speedometer -Design: B3 -Shaft diameter: Ø 50 mm -Protection class: IP 44 -Weight: 220 kg Godpfob A Ixzjx Abdsbg

Condition: new, Year of construction: 2023, For inquiries regarding the machine, Mr. Herden will be pleased to assist you (by phone at ...). Sales price: €1,990 net / €2,368.10 gross Shipping available. The SRV 590 Vibratory Rammer – Powerful and Lightweight Its low weight (62 kg) makes transportation and on-site handling easier. At the same time, you can rely on the robust construction of the SRV 590. Features: Gedpfsiadxcox Abdebg - Balanced operation and low hand-arm vibrations allow for fatigue-free work. - Durable and powerful tamping system. - Honda GXR 120 four-stroke petrol engine with low emissions. - Oil sensor checks oil pressure at start-up and prevents engine from starting if oil level is low. - Effective multi-stage air filtration system with cyclone pre-separator protects the engine from contamination. - Fuel line and/or tank filter cleans the fuel. - Throttle lever with locking positions for full throttle, reduced speed, idle, and engine stop/fuel shut-off. - Maintenance-free tamping foot. - Easy to transport with carry handles and rollers. - Operating hours counter as standard. Technical Data Operating weight: 62 kg Shoe width: 28 cm Blow rate: 700 strokes/min Engine: Honda GXR 120 (4-stroke petrol) Engine power, max.: 2.6 kW (3.6 hp) We are an official Weber distributor with over 80 Weber-MT compaction plates in stock. We are also a Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Subject to prior sale and errors excepted.

Condition: used, mileage: 199,460 km, power: 338 kW (459.55 HP), first registration: 04/2018, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x2, wheelbase: 1,800 mm, fuel: diesel, color: yellow, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: other, loading space length: 7,620 mm, loading space width: 2,500 mm, Year of construction: 2018, Equipment: air conditioning, crane, electric window regulation, navigation system, trailer coupling, Technical information Godpfx Ajvnt Eksbdebg Number of cylinders: 6 Engine capacity: 12.419 cc Drivetrain Drive: Wheel Engine type: MAN D2676 LF Transmission Transmission: 12TX-2620 DD, 12 gears, Automatic Axle configuration Axle 1: Tyre size: 385/65R22,5; Suspension: leaf suspension Axle 2: Tyre size: 385/65R22,5; Steering; Suspension: leaf suspension Axle 3: Tyre size: 315/80R22,5; Double wheels; Suspension: air suspension Axle 4: Tyre size: 385/65R22,5; Double wheels; Steering; Suspension: air suspension Weights Empty weight: 13.289 kg Carrying capacity: 18.711 kg GVW: 32.000 kg Functional Mast: telescopic (3 parts) Make of bodywork: KENNIS 16R

Condition: used, Year of construction: 1976, Technical details: table surface area: 1300 x 190 mm range of revolution per miute: 60 - 4000 Stufenlos U/min feed continuous: Pinole: 0,06 / 0,12 / 0,24 mm/U Gedpsu Sq Emefx Abdjbg quill stroke vertical: 140 mm spindle taper: SK 40 spindle head swivable left - right: 90° und 45° ° total power requirement: 3,0 kW weight of the machine ca.: 1620 kg machine dimensions LxWxH: 2,7 x 2,3 x 2,4 m Milling machine with universal milling head Spindle run right/left Table specifications: X/Y/Z travel: 860/380/460mm. feed X/Y/Z: 40 - 400mm/min. continuous rapid traverse 400mm/min. max. workpiece weight 30kg Equipment 3-way measuring display Mitutoyo with beam machine lighting Coolant tank with pump X- and Y-axis feed adjustable incl. accessories comparable to the picture *

Condition: good (used), Horizontal milling device – counterholder for KUNZMAN milling machines series WF. This was an accessory for a KUNZMANN WF 4/3 TNC 124 There are 2 pieces available. The new price at Kunzmann is over € 2,000 + VAT. With a corresponding adapter plate it should also fit other machines e.g. EMCO, MIKRON; DECKEL; FPS etc. Gedpfx Absvr Stuedjbg Price net ex warehouse

Condition: good (used), Year of construction: 1992, DC motor, geared motor, electric motor, DC geared motor -Speed: 200/2000-3000 rpm Gbsdeb A Ngxepfx Abdjg -Power: 3.2 kW -Speedometer -Design: B3 -Shaft diameter: Ø 50 mm -Protection class: IP 44 -Number: 1x motor available Price: per piece -Weight: 220 kg

Condition: used, Year of construction: 2007, Technical details: x-travel: 1200 mm y-travel: 600 mm z-travel: 800 mm distance spindle /table: 125 / 925 mm control: Heidenhain iTNC 530 number of spindle speeds: 9000 steples U/min. max. torque on the spindle: max.82 Nm Gjdpfx Abevithzodsbg switched on hours: 43363 h spindle hours: 16319 h tool changer with: 24 Plätze table-size: 1250 x 630 (Kreuzschiebetisch) mm max. table load: 1000 kg spindle taper MT: SK40 spindle drive: 13 kW feed range: X/Y/Z: 40/40/30 m/min rapid traverse:: X/Y/Z: 40/40/30 m/min feed power: X/Y/Z: 7/7/16 kN interface: ja total power requirement: 13 kW Weight approx.: 8,0 t dimension coolant device: ca. L:1,25 x B: 0,7 x H: 1,56 m dimension machine xH: 2,4 x 3,0 x 3,3 m Main spindle: Spindle head DIN 69871, SK 40/DIN 69 871-A40 and pull stud DIN 69872 Drive technology via ball screw drive Equipment: Compact filter/coolant high-pressure system Knoll Chip conveyor/scraper belt conveyor 300mm Tool changing unit with disk magazine for 24 tools Electronic handwheel Operation via Heidenhain control panel Accessories: AL plate 1200x600x45mm with holes Ø 15mm *

Condition: good (used), Thread cutting head with Stehler jaws, thread cutting die Gbedpfx Ajb A N U Rjbdsg -inch thread: 1/2"-3/4"-1" inch -Weight: 5 kg

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting Gbsdpfxeb A Rabo Abdog -inch thread: 1/2"-3/4" inch -Weight: 4.5 kg

Condition: good (used), Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes Gbodpfxsb A Rkds Abdeg -Holes diameter: 90/105/125/160 mm -Angle: adjustable -Double clamping device: for pipe mounting -Weight: 65 kg

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutter Gbjdsb A Rlvjpfx Abdjg -inch thread: 3/8" - 1" inch -In the transport case -Weight: 5 kg

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, Godpfob A Rlujx Abdsbg Thread cutting machine, pipe thread cutter -inch thread: 1/2"-3/4" inch -Weight: 6 kg

Condition: good (used), geared motor, electric motor -Speed: 5000 rpm -Power: 0.18 kW -Design: B3 Godpfx Aob A R Avsbdobg -Shaft diameter: Ø 9 mm -Protection class: IP 21 -Weight: 3 kg

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve Gbsdeb A Nymspfx Abdog -Connection: 3/8" inch -Air: 9 bar -Water: 9 bar Price: per piece Quantity: 15 available -Weight: 1 kg

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve -Connection: 3/8" inch -Air: 9 bar -Water: 9 bar -Price: per piece -Quantity: 13x Available -Weight: 1 kg Gbjdpfxeb A Sdco Abdog

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Manufacturer: Mubea, sheet metal and round steel shear type 3/5 R -Cutting insert length: 200 mm -Steel sheet: up to 5 mm -Flat/strip iron: up to 60x6 mm -Round steel: up to 13 mm -Cutting capacity: see photo of the nameplate Gedpfx Aboiaqmxodobg -Overall dimensions: 380/160/H1310 mm -Transport dimensions: 970/160/H470 mm -Weight: 23 kg

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Manufacturer: Mubea, sheet metal and round steel shear type 3/5 R -Cutting insert length: 200 mm Gbedeiachnepfx Abdsg -Steel sheet: up to 8 mm -Lift-down device: -Overall dimensions: 385/160/H1280 mm -Transport dimensions: 960/160/H390 mm -Weight: 22 kg

Condition: good (used), Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Perthel, pipe bending tool for profile bending machine -Profile diameter: Pipe size 16 - 76 mm / 3/8" to 3 1/4" Gbedpsgrzuusfx Abdsg -Dimensions: 1020/310/H170 mm -Weight: 28 kg

Condition: good (used), Flame cutting system, torch, oxyfuel cutting system, cutting torch, welding torch, hand cutting torch, welding kit, hose kit, twin hose, oxyfuel hose Gedpfoq Sbf Sjx Abdobg -Hose assembly: Acetylene-Oxygen -Type: DIN 8541/3/92/RH -Length: 24 m -Transport dimensions: Ø 640 x 140 mm -Weight: 13 kg