Used Angle Gear for sale (13,427)

Condition: excellent (used), Year of construction: 2010, 1. Clamping table, square design, manufactured by AMF, dimensions 600 x 1060 mm, year of manufacture 2010. Width 600 mm, height 1060 mm (4 sides). Dkedez N S Egepfx Apmew Base plate: 760 mm x 735 mm x 50 mm. Grid hole spacing: 50 mm x 50 mm, thread: M16. New price: €12,000. In very good condition.

Condition: used, Pair of cast iron angle plates Width: 1000 mm Height: 2075 mm Dkjdpfx Aez H I A Ispmsw Depth: 700 mm Unit weight: 1 T

Condition: good (used), Year of construction: 1978, max. pitch circle 152 mm Number of teeth 8-50 St. weight 7500 kg Technical data – Min./max. foot cone angle: 15° / 55° – Pitch circle diameter: 152 mm – Max. tooth height with 21° finished broach head: 10.7 mm – Max. tooth width at tooth root with 21°: 28 mm – Broach head diameter: 200 mm – Number of teeth range: 8–50 – Max. broach head diameter: .21" Dkjdpfx Aps Agw R Eemew Workpiece spindle – Diameter of the tapered bore at the wide end: 99.219 mm – Clamping length at 304.8 mm: 15.478 mm – Taper depth: 15.875 mm – Diameter of the entire spindle bore: 22.225 mm Maximum tooth height: 14.8 mm Maximum tooth width at the root: 28 mm Maximum root angle: 55° Minimum root angle: 15° Milling head speed: 32.6-49.7 m/min Feed speeds (seconds per tooth): 2-3.1 Index range: 8-50 mm Diameter of taper bore at large end: 99 mm Taper per foot: 15.4 mm Depth of taper: 15.8 mm Countersink behind the taper: 57.2 x 77.9 mm Diameter of the bore through the spindle: 22.3 mm Power of the main drive motor: 10 HP Rotation of the main drive motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the hydraulic motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the coolant pump (60 Hz/50 Hz): 3600/3000 rpm Rotation of the chip screw motor (60 Hz/50 Hz): 1800/1500 rpm Footprint (L x W): 320 x 221 cm Total weight of the 726 REVACYCLE machine: approx. 9 t

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 350 153 09 095, overall weight: 180 kg, input voltage: 400 V, We are offering this ready-to-use Meurer CMW/AL 60/40 angle welding machine, manufactured in 1995. Manufacturer: Meurer Model: CMW/AL 60/40 Dodpfxjz Ii Uzj Apmskw Year of manufacture: 1995 Welding current range: 60–400 A Open-circuit voltage: 60 V Mains voltage: 400 V Frequency: 50 Hz Duty cycle: 60% at 400 A Protection class: IP21 Weight: 180 kg If you have any questions or require further information, please do not hesitate to contact us by sending a message or calling us.

Condition: used, Year of construction: 2015, overall weight: 16,000 kg, total height: 2,200 mm, total length: 4,410 mm, total width: 2,600 mm, GROB C6-A – Cold Rolling Machine Technical Data: Gear Module: up to approx. 2.3 Dodjz E Ra Hspfx Apmskw Gear Diameter: approx. 8–80 mm Max. Clamping Diameter: approx. 315 mm Power: 25 kW Weight approx.: 16,000 kg Dimensions (LxWxH) approx.: 4410 x 2600 x 2200 mm Year of construction: 2,015 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: like new (used), functionality: fully functional, Very good condition, the machines looks like new. Angle sealing machine and shrink tunnel Manufacturer: AVC Sealing Solutions Dkedpsz Dwl Hsfx Apmjw Angle sealing machine, type HS-500 Sealing strip: 500 x 600 mm Machine dimensions: 1780 x 1020 x 1120 Shrink tunnel, Type 1000 Tunnel opening: 440 x 300 mm Shrink length: 1000 mm Machine dimensions: 1800 x 1100 x 1600 Maximum heating power: 11 kW

Condition: used, total height: 1,900 mm, total width: 2,200 mm, total length: 1,500 mm, Year of manufacture: 1959 Colour: Blue Empty weight: 2.500 kg Price: On request - Year: 1959 - Documentation available: Yes Dkodpfx Apszkui Ssmow - Serial number: 80 - Drive system: Conventional - Power [kW]: 5.0 - Transport dimensions: 1500mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2003, total length: 9,060 mm, total width: 2,500 mm, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,450 mm, Equipment: ABS, = Additional Options and Accessories = - ADR - EBS - Hub axle - Aluminum rims - Air suspension - Disc brakes = Notes = Beautiful and fully functional Van Hool 20FT tipper chassis (year of manufacture 2003) with ABS/EBS, SAF axles with disc brakes (Intradisc), 2 lift axles, ADR approval (EXII, EXIII, FL, AT), tipping capability with 24V connection up to a 20° tipping angle, unladen weight: 5,300 kg, permissible total weight: 39,000 kg, tires: 385/65-R22.5 (tread depth left: 4/11/12 mm; tread depth right: 9/11/9 mm), Dutch registration Dksdsy H Hdpepfx Apmow = Further Information = General Information Year of construction: 2003 License plate: OH-91-FS Axle Configuration Tire size: 385/65 R22.5 Axle brand: SAF Intradisc Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Aluminum rims; Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 25%; Tire tread depth right: 55% Rear axle 2: Aluminum rims; Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle 3: Aluminum rims; Max. axle load: 9000 kg; Tire tread depth left: 75%; Tire tread depth right: 55% Weights Unladen weight: 5,300 kg Payload: 33,700 kg GVW: 39,000 kg Functional Body brand: Van Hool 3B2013 Condition Technical condition: very good Optical condition: very good Further Information Please contact Arne Honingh for further information.

Condition: used, gearing type: automatic, color: other, Year of manufacture: Apr 2010 Year of construction: 2010 Axle 1: left 8 mm righ8 mm Axle 2: left 8 8 mm right 8 8 mm Axle 3: left mm right mm Dodpfx Apsy Enkbsmokw

Condition: ready for operation (used), Oerlikon SL-2, bevel gear lapping machine. Dedpfx Apjz H Np Asmjkw

Condition: used, Pair of cast iron angle plates Drilling diameter: Ø 27 mm Dkjdpoz H I Anofx Apmjw Width: 575 mm Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T

Condition: used, color: other, Year of manufacture: Apr 2016 Year of construction: 2016 Djdjy Hrhyopfx Apmekw VERY NICE GOOD WORKING MODERN TERMINAL TRACTOR.

Condition: used, machine/vehicle number: 10314, The system, retrofitted by Comur in 2001, is still operational and has the following technical features: • CE certification • Speed control of the hammering action via inverter • External cooling tank • Magnetic chip conveyor Dkodpo Ahraxsfx Apmjw • Hydraulic unit and workpiece clamping cylinder • Completely renovated electrical system

Condition: good (used), Year of construction: 2011, functionality: fully functional, Max. diameter = 450 mm and module = 10 Min. diameter = 69 mm and module = 0.9 Dedpfsz Rm Hzjx Apmekw

Condition: good (used), Year of construction: 2008, Ref. -No.: 10666 Manufacturer: GLEASON - PFAUTER Type: P 1600 / 2000 S Year of construction: 2008 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany Machine length: 6900 mm Machine width: 8400 mm Machine Height: 3700 mm Max. Wheel Diameter: 2000 mm Gear Width: 700 mm Weight Of The Machine Ca.: 35 t Further information: The machine is currently in active production and can be inspected under power and in operation by prior arrangement Dkeds Ahkytjpfx Apmjw

Condition: used, ALMiG Gear 132 Compressor, Screw Compressor, 10 bar The screw compressors in the GEAR series are particularly suitable for very high compressed air requirements. The maintenance-friendly and service-oriented drive concept of the GEAR compressors includes a robust drive motor with high power reserves. The highly efficient gearbox operates with minimal slippage, high operational reliability, and an efficiency of over 98%, resulting in almost loss-free operation and thus protecting the drive. Furthermore, the highly efficient coolant separation enables a minimal residual oil content of only 2–3 mg/m³. The encapsulated design of the gearbox assembly makes these systems ideal for use under the harshest operating conditions. - Ideal for very high compressed air demands - Robust drive unit with high power reserves - Almost loss-free concept with an efficiency of > 98% Dkodjttv Ibepfx Apmsw - Maintenance-friendly and service-oriented drive concept ALMiG Gear 132 Year of manufacture: 2011 Final pressure: 10 bar Motor power: 132 kW Volume flow: 18.04 m³/min Length: 2800 mm Width: 1400 mm Height: 2025 mm Weight: 3830 kg Operating hours: 10,337 h Load hours: 9,378 h Downtime: 13,887 h Total delivery volume: 11,333,000 m³ You can find more ALMiG compressors – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2000, condition: good (used), Technical Specification Punching/Shearing system Material * flatsteel length : 6.000 mm width : 50-500 mm thicknes : 5-30 mm * angle steel length : 12.000 mm width : 50 x 50 — 150 150 mm thickness : max. 15 mm Punching Machine VPO 1400 Capacity : 1400 kN (140T) Punch diameter/material thickness (max): 32 mm/25 mm Punching in flat- and angle steel : yes Number of punches for flat steel : 4 Number of punches for angle steel : 1 Hydraulic clamping : yes Centring points : yes Mist lubrication system : yes Shear for Flat Steel VPS 1800 Capacity : 1800 kN (180 ton) Width/material thickness (max) : 500 mm/22 mm Hydraulic clamping : yes Mitreshearing : +/- 45° Shear for Angle Steel VHS 1800 Capacity : 1800 kN (180 ton) Suitable for Angle : 50x50x5 up to and included 150x150x15 Hydraulic clamping : yes Punching Unit for Angle Flange Dkedpfx Apoq Hu H Romew Capacity : 600 kN (60 ton) Punchdiameter/material thicknes (max.) : 32 mm / 15 mm Numbering Unit Number of disks : 4 pcs Number of characters : 36 pcs Character hight : 10 mm Number of characters per code : standard max. 16 Inprint : approx 1 mm Electrical power : 3 x 415V AC + N + PE, 50 CPS

Condition: excellent (used), functionality: fully functional, Various accessories for a Reishauer NRK thread grinding machine Original – change gear box with stand, containing 50 ground change gears in the original wooden box 26 loose change gears, including 2x Z=63, 2x Z=64, and 1x Z=72, original all gears with ground teeth Dodpfjza Dk Sex Apmjkw Grinding machine accessories: 2 adjustable steady rests 66189-2 + 66189-3 / setting blocks (1x incomplete) 9 new grinding wheel flanges various new and unused grinding wheels Balancing mandrel Thread rolling device, including rolling device and lead curve Roller grinding device various cam disks/cam curves Grinding device, manufacturer Landert Motoren various oil nozzles unused strip curtain/splash guard Price / details on request All technical specifications are subject to printing errors and changes. We only sell to countries within the European Community.

Condition: used, Desoutter CVI II Controller with Angle Screwdriver Manufacturer: Georges Renault (Desoutter) Controller: CVI II Angle Screwdriver: 01C11200 Dkedpfx Apowxv Hksmsw CVI II Controller From simple start-up procedures to complex sequence applications – with up to 20 phases and 250 cycles – for optimal speed, accuracy, and operator comfort in every fastening process. The controller features various interfaces, including an Ethernet port, an RS232 port, and 7 logic inputs as well as 8 logic outputs (24 volts). The CVI II controller can be used to control a handheld electric tool from the ER series or a stationary screw spindle from the EM series. It is important to note that the CVI II can also be used in combination with a measurement sensor-controlled angle screwdriver, such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" output. Memory capacity: Between 2,500 and 8,500 fastening results per station, depending on the number of cycles and operating mode (asynchronous or synchronous). Tightening strategies: – Torque and angle monitoring – Angle and torque monitoring – Torque and angle monitoring – Torque and angle rate – Prevailing torque – Yield point – Stall torque – Torque and angle – Detection of the plastic zone of the joint – Additional torque and angle sensors – Self-tapping – Current monitoring Connectable tools: Angle screwdriver / Straight screwdriver / Pistol screwdriver / Stationary screw spindles Dimensions (L x W x H): 400 x 400 x 330 mm Weight: 30 kg You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Pair of steel angle plates Slots width: 22 mm Dsdpfoz H I Ahsx Apmekw Oblongs dimensions: 120 x 16 mm Width: 150 mm Depth: 445 mm Total height: 600 mm

Condition: used, Year of construction: 2010, max. wheel diameter 800 mm max. module 20 Control SINUMERIK 840 D table rotation speed 50 U/min table load 95 kN Size of table plate 700 mm table bore diameter 250 mm Axial travel 1000 mm pivoting angle +/- 35 Grad Dedps Afar Sjfx Apmokw 450 U/min tangential travel max. 320 mm tool diameter 315 mm total power requirement 50,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 6,30 x 5,00 x H3,80 m

Condition: used, The Eppendorf FA-45-30-11 is a durable fixed-angle rotor engineered for efficient high-speed centrifugation. Designed to accommodate multiple tube formats, it ensures consistent sample separation and reliable performance in demanding laboratory environments. Compatible with select Eppendorf centrifuge models. Dedpfjyx S Hmjx Apmskw

Condition: used, Year of construction: 1997, Technical details: max. wheel diameter: 200 mm gear width: 250 mm max. module: 3 Dedpfx Apo Ah Scvomjkw min. module: 0,5 x-travel: 100 mm y-travel: 160 mm z-travel: 100 mm A-Axis travel: -40 ... +40 ° speeds of tool: 300 - 4000 U/min workpiece turning speeds: U/min connected load: 48 kVA dimensions of the machine ca.: 5,3 x 4,2 x 3,4 m weight of the machine ca.: 6,5 t

Condition: used, operating hours: 19,000 h, gearing type: automatic, color: other, Year of manufacture: Aug 2017 Year of construction: 2017 Dsdpfxszu Rt Uo Apmokw Axle 1: left 5 mm right 5 mm Axle 2: left 18 18 mm right 18 18 mm Axle 3: left mm right mm

Condition: good (used), WANDERER 16/E milling machine, made in Germany. Year of manufacture: 1962. The machine is operational and in working condition. For more information, please contact us. Djdpfx Apow Al U Eemskw