Used Arburg 305 for sale (333)

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) Gbjdpoyxdwdofx Ag Hjk • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: excellent (used), Year of construction: 1998, clamping force: 2,000 kN, screw diameter: 45 mm, injection pressure: 2,500 bar, injection weight: 240 g, mold height (min.): 250 mm, Arburg 520C-2000-675 (154) without hopper General information Product Code: 154 Availability: In Stock Year of production: 1998 Brand: Arburg Technical data Shot Weight: 240 g Clamping Force: 2,000 kN Screw dia: 45 mm Injection pressure: 2500 bar Gbsdpfx Agovtzmts Hsk Tie bar distance: 520 x 520 mm Platen size: 715 x 715 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 44,9 kW Workinghours: 126766 h Weight: 6630 kg Dimensions: 5,6 x 1,7 m Euromap: Yes Air valve: Yes

Condition: excellent (used), Year of construction: 2005, clamping force: 1,300 kN, screw diameter: 35 mm, injection pressure: 2,500 bar, injection weight: 127 g, Arburg 470S-1300-350 (170) hybrid with electric screw drive, without hopper General information Product Code: 170 Availability: In Stock Year of production: 2005 Brand: Arburg Technical data Shot Weight: 127 g Clamping Force: 1,300 kN Screw dia: 35 mm Gbodpfx Aevt Tn Nsg Hsk Injection pressure: 2500 bar Tie bar distance: 470 x 470 mm Platen size: 650 x 650 mm Mould height min.: 275 mm Type of controls: Selogica Language: German Power: 33,9 kW Workinghours: 85.400 h Weight: 5.100 kg Dimensions: 5 x 1,8 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes

Condition: excellent (used), Year of construction: 1999, operating hours: 95,616 h, clamping force: 1,300 kN, screw diameter: 45 mm, injection pressure: 1,670 bar, injection weight: 194 g, Arburg 520C-1300-350 (163) with bimetallic plasticizing unit General information Product Code: 163 Availability: In Stock Year of production: 1999 Brand: Arburg Technical data Shot Weight: 194 g Clamping Force: 1,300 kN Screw dia: 45 mm Injection pressure: 1670 bar Tie bar distance: 520x520 mm Platen size: 715x715 mm Mould height min.: 250 mm Type of controls: Selogica Language: German Power: 32,2 kW Workinghours: 95616 h Gbedpfx Agovt Rvde Hek Weight: 6380 kg Dimensions: 5,1x1,9 m Hopper: No Core pull: Yes Euromap: Yes

Condition: ready for operation (used), Year of construction: 2018, operating hours: 58 h, General Data Measurements width 4360 mm Measurements depth 1718 mm Measurements height 3910 mm Machine weight 7600 kg Gjdpfxex D Nc He Ag Hebk Injection Unit Screw diameter 35 mm Injection pressure 2500 bar Clamping Unit Clamping force 1000 kN This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€. Application Types Injection Moulding

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Gbsdpfx Agoyym Sas Hok

Condition: good (used), 1x used Arburg 370U 500-170 With Multilift Gedoyym R Njpfx Ag Hebk Immediately available!

Condition: good (used), Year of construction: 2002, Selling this machine, immediately available. For further details, see the pictures. Gbodpfx Agoyym Rpj Hek

Condition: used, Dear Sir or Madam, We offer for sale: Assembly line for inserting a gasket into a jerrycan cap incl. 2 feeder belts (for jerrycan caps and gaskets) Assembly unit Godpfx Aoyym N Seg Hsbk as well as carton feeding and finished product discharge conveyors

Condition: used, Year of construction: 2008, screw size 18 mm closing pressure 250 kN opening stroke max. 350 mm mould space 200 mm control Selogica Number of working hours 52.492 h ARBURG ALLROUNDER 270 S 250-70 – Injection Molding Machine – Year ofManufacture: 2008 – Excellent Condition A reliable and proven ARBURG ALLROUNDER 270 S 250-70 injection molding machine, manufactured in 2008, is for sale. The machine is ideal for producing precise plastic parts in small to medium-volume production runs and impresses with its robust construction and the renowned ARBURG quality “Made in Germany.” Technical Highlights: - Clamping force: 250 kN - Injection unit: Size 70 - Screw diameter: approx. 18–25 mm - Injection pressure: up to approx. 2,500 bar - Column spacing: approx. 270 x 270 mm - Platen size: approx. 380 x 380 mm - Connected load: 53 kW Electrical specifications: - Operating voltage: 400 V / 50 Hz - Control voltage: 230 V / 24 V - Total current consumption: 89 A Additional information: - Year of manufacture: 2008 - Manufacturer: ARBURG (Germany) - Machine is robust, durable, and easy to maintain - Ideal for technical plastic parts and precision applications Gbsdpfxeywzv Is Ag Hok Advantages: - Proven SELOGICA control system (standard for this series) - Compact design - High process reliability - Long-term availability of spare parts guaranteed Viewing available by appointment. Additional information, photos, or videos available upon request. - Operating hours: 52,492 hours, 7,085,048 cycles - Centring ring mounts: ø125 mm - Blowing unit fitted

Condition: used, Year of construction: 2019, x-axis S400 mm y-axis S800 mm z-axis S1800 mm control SELOGICA (AMS) weight of the machine ca. 350 kg dimensions of the machine ca. 2,50x1,50x2,50 m ARBURG MULTILIFT SELECT 6 kg – Linear Robot System (Transverse Version) General Specifications - Manufacturer: ARBURG - Model: MULTILIFT SELECT 6 kg transverse - Year of manufacture: Net weight: approx. 350 kg Performance & Load Capacity - Maximum payload: 6 kg Control & Pneumatics Gjdpfxoywzvzo Ag Hsbk - Control system: SELOGICA - Pneumatic operating pressure: 0.6 MPa - Axis configuration - Rotation axes A/B/C: - / 180° / 90° Travel ranges: - X-axis: 400 mm - Y-axis: 800 mm - Z-axis: 1800 mm Machine type - Linear robot for injection molding automation - Cross-axis removal system

Condition: good (used), Year of construction: 2000, operating hours: 118,400 h, functionality: fully functional, machine/vehicle number: 182854, clamping force: 2,500 kN, overall weight: 14,000 kg, heating capacity: 23.1 kW (31.41 HP), type of input current: three-phase, For sale: Arburg 630 S 2500-130 injection moulding machine. The machine is in good condition and immediately ready for operation. Technical specifications: Year of manufacture: 11/2000 Place of production: Made in Germany Clamping force: 2500 kN Gbodpeyx Daxofx Ag Hok Operating hours: 118,400 h Injection unit: 1300 cm³ shot volume/capacity Total machine weight: 14,000 kg Operating voltage: 400 V (3~ AC) Frequency: 50 Hz Heating capacity: 23.1 kW Pump motor: 45.0 kW Total connected load: 68.1 kW

Condition: new, Year of construction: 2010, operating hours: 72,154 h, clamping force: 800 kN, screw diameter: 25 mm, displacement volume: 54 cm³, ARBURG Allrounder 900 T 800-150 Stock no.: 503576 Manufacturer: ARBURG Model: Allrounder 900 T 800-150 Control system: Year of manufacture: 2010 Operating hours: 72,154 h Technical Data – Clamping Unit Clamping force: 800 kN Tie bar spacing (h x v): 900 x 900 mm Min. mould height: 250 mm Max. daylight between platens: 550 mm Opening stroke: 300 mm Rotary table diameter: 900 mm Ejector stroke: 150 mm Ejector force: 46 kN Centric location, moving platen (D): 90 mm Centric location, fixed platen (D): 90 mm Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 54 ccm Injection pressure: 2,500 bar Screw length: 24 l/d Screw torque: 210 N Plasticising rate: 49 g/s PS Free-flow injection rate: 80 g/s PS Dimensions & Weight Machine dimensions (LxWxH): 3.8m x 1.85m x 2.15m Total weight: 5,000 kg Equipment Godpfeytd Spex Ag Hsbk Display text in German 1x air valve Machine with rotary table Machine with water manifold Levelling elements BDE interface

Condition: good (used), Year of construction: 2013, operating hours: 36,163 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, displacement volume: 59 cm³, ARBURG Allrounder 375 V 500-170 Stock no.: 503615 Manufacturer: ARBURG Model: Allrounder 375 V 500-170 Control: Selogica-direct Year of manufacture: 2013 Operating hours: 36,163 h Technical Data – Clamping Unit Clamping force: 500 kN Minimum mold height: 200 mm Maximum mold height: 550 mm Maximum platen distance: 302 mm Opening stroke: 225 mm Rotary table diameter: 900 mm Ejector force: 70 kN Gbsdpfx Aeytdfieg Hsk Movable platen centering diameter: 125 mm Tool weight: 230 kg Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 59 cm³ Injection pressure: 2,500 bar Screw length: 24 l/d Screw speed: 35 rpm Screw torque: 210 Nm Number of heating zones: 5 Dimensions & Weight Machine dimensions (LxWxH): 3 m x 1.6 m x 3.48 m Total weight: 3,540 kg Equipment Display language: German Rotary table 1x hydraulic core pull Machine with water battery Machine without material hopper Levelling elements EUROMAP 67 handling interface EUROMAP 73 interface Interface for ejector plate safety

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Gbjdpfx Agsyzgk Es Hek Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2016, ARBURG A 470 H 1000-170 HIDRIVE (32.000 h) (S&P 3796) Manufacture year: 2016 Operating hours: 32,000 Stunden Screw: 30 mm Injection pressure: 2000 bar Stroke volume: 85 cm³ Clamping Force: 100 t Tie bar distance: 470 x 470 mm Mould installation height min.: 250 mm Plate distance max.: 850 mm Dimensions: 4100 x 1700 x 2400 mm Eeight: 5030 kg Connected load: 21 kW Accu, Robot Interface EM67, EM73, Airvalve Price: on request Gbjdpfsyzgkfsx Ag Hok contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2012, ARBURG A 375 V 500-170 Turntable (S&P 3773) Manufacture year: 2012 Operating hours: 36,900 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 50 t Gbsdpfoyzgi Ijx Ag Hsk Mould installation height min.: 170 mm Plate distance max.: 520 mm Dimensions: 3300 x 1700 x 2100 mm Eeight: 3740 kg Connected load: 11 + 11 = 22 kW Vertical injectionmoldingmachine with a 900mm turntable, 2 station 180°, incl. Option for horizontal injection into parting line incl. lifting table, Robot Interface EM67, Airvalve, EM73, Hotrunner etc...price when new approx. 170.000,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2016, ARBURG A 520 H 1500-170 HIDRIVE (20.621 h) (S&P 3795) Manufacture year: 2016 Operating hours: 20,621 Stunden Screw: 30 mm Gbodpeyzgizofx Ag Hsk Injection pressure: 2000 bar Stroke volume: 85 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4700 x 1600 x 2400 mm Eeight: 6500 kg Connected load: 29 kW Robot Interface EM67, Airvalve, Sorter Unit, Accumulator etc... Price: on request contact: Mr. Ralf Schulz

Condition: like new (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, Very well-maintained Multilift V 15, like new! Gsdoywtzvjpfx Ag Hjbk

Condition: good (used), Year of construction: 2007, functionality: fully functional, clamping force: 800 kN, For sale is an Arburg injection moulding machine, model 370 C 800-100. Technical Data: Year of manufacture: 2007 Injection unit unfortunately not included Clamping force: 800 kN Clearance between tie bars: 370 x 370 mm Max. platen distance: 750 mm Mould installation height: 250 mm Injection unit: 100 Transport and loading can be organised throughout Europe at an additional cost upon request. Prices are subject to VAT. Inspection by appointment possible. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Gbsdpfxsyxqiyo Ag Hjk Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 1998, clamping force: 500 kN, For sale is an Arburg 320 S 500-150 injection moulding machine. The item is in good condition. Manufacturer: ARBURG Model: ALLROUNDER 320 S Type / Version: 320 S 500 - 150 Machine number (Serial number): 174967 Year of manufacture: 1998 Clamping force: 500 Voltage: 400 V 3∼ Frequency: 50 Hz Operating hours: 2,250 Current (unknown): 0.3 A Gbodpfxoyxp Eaj Ag Hok Connected load / Power (unknown): 1×15.00 kW Total weight (unknown): 21.3 Transport and loading can be organised throughout Europe upon request and for an additional charge. Prices are exclusive of VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2008, operating hours: 60,902 h, functionality: fully functional, machine/vehicle number: 206087, clamping force: 400 kN, screw diameter: 22 mm, displacement volume: 34 cm³, For sale is an Arburg injection moulding machine, type 270 U 400-70. Gbodpfsyk Tlaox Ag Hek The machine is fully functional and ready for immediate operation. Technical data: Year of manufacture: 08 / 2007 Auto operating hours: 60,902 h Serial number: 206087 Operating voltage: 400 V Control voltage: 230 V (~ 50 Hz) / 24 V Rated current: 82 A / 39 A Clamping force: 400 kN Tie-bar distance: 270 mm x 270 mm Injection unit: size 70 Screw diameter: 22 mm Control system: Selogica Included accessories: Core pull, pneumatic needle shut-off, Selector chute

Condition: good (used), Year of construction: 2000, functionality: fully functional, clamping force: 150 kN, screw diameter: 18 mm, For sale is an Arburg 220 S 150-60 183385. The machine is in good condition and fully operational. Technical specifications: Clamping force: 150 kN Opening stroke: 275 mm Mold installation height: 150 mm Clear tie bar distance: 221 x 221 mm Injection unit: 60 Screw diameter: 18 mm Gsdpsyxnmpofx Ag Hsbk Calculated shot volume: 20 cm³ Shot weight: 18 g/PS Injection pressure: 2,500 bar Injection rate: 32 cm³ Net weight: 1,900 kg Pump hours: 94,830 h Automatic operation hours: 85,152 h The offer refers exclusively to the machine without mold/tools; these can be negotiated separately. Transport and loading can be organized across Europe at additional cost upon request. Prices are plus VAT. Inspection is possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange is possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2006, operating hours: 81,912 h, functionality: fully functional, machine/vehicle number: 202150, clamping force: 180 kN, For sale is an Arburg injection molding machine, model 170U 180-70. Gbedpfx Asyxm Theg Hsk The machine is fully functional and ready for immediate use. Technical data: Year of manufacture: 2006 Operating hours: 81,912 h Cylinder diameter: 18 mm Clamping force: 180 kN Needle shut-off: Pneumatic Internal pressure sensor Transport and loading can be arranged Europe-wide at additional cost upon request. All prices are subject to VAT. Inspection is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production needs? Or do you wish to sell your own? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2006, clamping force: 800 kN, Total connected load 21.7 kW Gbsdpfxoyux Uho Ag Hjk Pump motor 18.50 kW Weight 7,400 kg