Used Bar peeling machine for sale (91,548)

Peeling machine (debarker)

Call

Condition: excellent (used), New main engine, new upper roller engine, new disk, shaft, bronze sleeves and pedals. Befniae

more

Listing

Aizkraukle

(dealership location)

1,778 km

wemaprobst peeling machine

€11,000

Tube bending machine with bar loader

Call

Condition: good (used), main engine 7.5 kw, machine in a good working condition Clxj92nv

more

Auction

BLM Dynam 0 MR200

€5,500

Condition: good (used), Year of construction: 2002, machine/vehicle number: 605030601009, Functionality: fully functional, TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2400 bends/h Bending capacity round tube R=45 kg/mm²: 4 - 18 x 1.5 mm Bending capacity round tube R=35 kg/mm²: 4 - 20 x 1 mm Bending capacity round tube Al/Cu/Ms: 4 - 25.4 x 1.25 mm Bar feeder: BLM Carm 7 (BJ 2007) Positioning speed X-axis: 2000 mm/s Bending speed H/Z Y-axis: 400 °/s Turning speed Z-axis: 900 °/s Turning speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Bh0d82cu7zu Measuring tolerance X/T axis: ± 0.1 mm Measuring tolerance Y/Z/Q axis: ± 0.1° Maximum range at maximum acceleration X-Y-Z: 1000 mm - 90/90/0° - 0/180/0° with tube 18 x 1.25 mm MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Control system: Cybelec DMC 80

Multi-spindle Bar Milling Machine

Listing

Eindhoven

730 km

Tornos / Almac BA 1008

€39,950

Peeling / rolling and deep drilling machine

Call

Condition: like new (used), Year of construction: 2015, Multi-spindle milling machine with integrated bar feeder LNS QLS80S2. Machine was used only for dry machining of plastics. Bar capacity 16 mm. Sawing unit (lateral), one HF spindle (frontal)and gripper unit (frontal). Fanuc OiMD control. Qea2t

more

Listing

Screening Machine Mogensen Bar Sizer VX 2058 Title

Maastricht

(dealership location)

789 km

Screening Machines

Screening Machine Mogensen Bar Sizer VX 2058 Title

Call

Condition: ready for operation (used), Mogensen Bar Sizer Brand: Mogensen Type: Sizer VX 2058 Yqbt9a80 Dim.: 6000 x 1900 mm Execution: 5 Steps Bars: length 1000 mm, diameter 40 mm Ø, distance C.C: 100 mm On stock: 2 pieces

more

Listing

Neuss

816 km

TMT TESCHKE 22/20

€20,000

Automatic locking bar machine

Call

Condition: good (used), Make: TMT TESCHKE, type: 22/20, year of manufacture: 1979, drilling depth 150 - 2,000 mm, center height 300 mm, circulation Ø 530 mm, center width 2,350 mm, working Ø boring / skiving / smoothing 50-200 mm, NC control, emulsion preparation, suction device Khjoegxvvx +++ Attention: this machine is part of an online auction! +++

more

Listing

Gütersloh

870 km

Schüco LA 100

Call

Condition: excellent (used), Year of construction: 2015, Schüco LA 100 machine Bho700qws3j The automatic profile transom rod machine is used to automatically punch holes and cut Schüco transom rods to length. Features and equipment ●● Holder for interchangeable punching tools ●● Automatic tool recognition ●● Hydropneumatic press cylinder ●● Automatic transport of the locking bars ●● Manual feeding of the locking bars into the machine ●● Control system: ●● 24" touch PC with Windows 10 Home Edition ●● Connection for matrix code reader ●● Network connection for remote maintenance ●● Includes coil stand for SimplySmart locking bar ●● Optionally mountable feed track (2300 mm) ●● Material chute on the outfeed side (length 2000 mm) ●● Adjustment options for the locking bar production: ●● Processing the locking bar in the order of the assembly sequence ●● Production of identical transom rods in packages (e.g. for window series of the same size) ●● Painting: RAL 9006 (white aluminum), RAL 7016 (anthracite grey)

more

Listing

Willich

806 km

3-roll bar straightening machine

WMW URP 80

Call

Condition: used, Year of construction: 1965, für Stangen und ... für dickwandige Rohre working area 30 - 80 mm Ø Ckdxerlmn0 main drive 38 kW Ein- und Auslauf total wight 12 t

more

Listing

Meinerzhagen

886 km

multi spindle bar machine

Gildemeister Bielefeld AS 32-6

Call

Condition: good (used), Year of construction: 1980, Gildemeister 6-spindle automatic lathe, cam-controlled max. bar capacity: 32.0 mm for bars up to 3.30 m - incl. bar guide, - steel processing, running with cutting oil - simply equipped with tools - 1 set of clamping and feed clamps Bharpcm2hfe - change gears (on machine) - 1 set of cams for cross slides - 1 set of cams for main slide Spindle stop

more

Listing

Bielefeld

870 km

Peeling machine

Call

Condition: used, Year of construction: 1970, Antique peeling machine Cb9dk0k

more

Listing

Screening Machine Mogensen Bar Sizer VX 2558 Title

Maastricht

(dealership location)

789 km

Screening Machines

Screening Machine Mogensen Bar Sizer VX 2558 Title

Call

Condition: ready for operation (used), Mogensen Bar Sizer Brand: Mogensen Type: Sizer VX 2558 Cjqz3j3r07 Dim.: 6000 x 2400 mm Execution: 5 Steps Bars: length 950 mm, diameter 30 mm Ø, distance C.C: 36 mm

more

Listing

Neuss

816 km

Peeling / rolling and deep drilling machine

TMT Teschke 30/20

€30,000

CNC flat bar processing machine

Call

Condition: good (used), Year of construction: 1981, Drilling depth 150 - 2,000 mm, center height 300 mm, circulation Ø 530 mm, center width 2,350 mm, working Ø boring / skiving / smoothing 50-200 mm, clamping Ø 250 mm, hydr. clamping stroke 150 mm, oil mist extraction, belt filter system, control system, Siemens, Simatic Panel Touch type, boring bars, machine accessories +++ Attention: the machine is part of an online auction! +++ Dmkx89

more

Listing

Toruń

1,452 km

MASZYNOHURT FOX CNC FLAT120

€45,350

Call

Condition: new, Year of construction: 2023, CNC machine for flat bars - straightening, cutting, bending, and cutting in one cycle automatically from a coil. Flat bar width: 30-120 mm Flat bar thickness: 3-8 mm Number of hydraulic cylinders: 3 pieces (cutting + shearing) Total power: 11 kW Bdey0lvs7ga CNC control Machine weight with coil holder: 2350 kg Coil holder for circular tape - diameter 60-800 mm for a weight of 3 tons

more

Listing

Ummendorf

1,222 km

Bar turning machine

IEMCA Concept 325

€11,499

Cable Peeling Machine Cable Insulation Machine

Call

Condition: excellent (used), Year of construction: 2015, For sale here is a bar loader from IEMCA. The bar loader is in very good condition. It is ready for immediate use and available. Manufacturer: Iemca Type: Concept 325 Bar diameter: 3-25mm B0bc72kh Maximum pole length: 3200mm

more

Listing

Leingarten

1,099 km

Josan 120

€3,999

6 spindle automatic bar machine

Call

Condition: new, Year of construction: 2023, For all recycling we have shredders and other machines for recycling in stock in Leingarten! From copper recycling to plastic recycling you can buy all machines from us. Ask us gladly. Isa3fjs9l ‼️SOFORT AVAILABLE ‼️ ON LAGER‼️ ‼️netto 5.490€‼️ We would be happy to demonstrate the machine live in Leingarten! Only with appointment! We are in Leingarten, German company, German laws, warranty and service! We also speak english! Simply professional copper extraction for cables from 1,5mm to 120mm! ➡️Mit UVV (accident prevention regulation) executed by German company here Our cable peeling machine Josan S120! So you can recycle cables fast and cheap and get pure copper. Very fast processing. Powerful 3 kw motor. Built to last. Take a close look at the machine on the pictures. Gladly also on site live with us in Leingarten (only with appointment). Net 5.490,00€ +19% VAT 1.041,10€ Gross 6.533,10€ Since we recycle ourselves, we can also demonstrate our machines to you by appointment. CE certified machines from us. ‼️Bei for further questions please contact us! We can only answer you if you contact us with your name, address, email and phone number. Anything else will go down as spam. We will get back to you and advise you in advance!‼️ Pictures/equipment/price may vary. Errors excepted

more

Listing

Tiefenbronn

1,108 km

SCHÜTTE SF20 DNT

Call

Condition: excellent (used), Year of construction: 1990, 6-spindle automatic lathe brand: SCHÜTTE type: SF20DNT new in: 1990 equipped with: pick up attachement thread cutting attachement chip conveyor complete toolholder Lo3g9qt bar loader IEMCA PRA

more

Listing

Ubľa

1,892 km

COSMA U9 ele barrel type round bar milling machine

Cosma U9 ele

€46,000

Hydr. bar shear and hole punching machine

Call

Condition: new, Year of construction: 2006, Operating hours: 0 h, High-performance COSMA U9 barrel router with electronic control system for the efficient production of rods with a circular cross-section made of wood Longitudinal shape: cylindrical, conical, slightly chamfered, slightly curved Diameter range: 19-58 mm Machining length: 500 - 2500 mm, chamfered max. feed rate: 10 m/min In standard version with standard accessories for the production of a desired workpiece according to sample or dimensions 1 COSMA MP pneumatic magazine for automatic feeding of square-cut raw timber of the same shape and length; processing length: 0.7 to 1.5 m - Feed table is operated by double-acting compressed air cylinder, - Feed jaws are controlled by means of a double-acting compressed air cylinder. - Round bar cutter head electronically controlled by a stepper motor with oil mist lubrication and 1 set (= 3 pieces) of special HSS knives. - Vertical double roller take-off with 2 driven pairs of rollers, - COSMA VGM feed gear motor with 0.75kw/400/690V/50 Hz, adjustable - COSMA AHV haul-off roller lifting device for automatic lifting of the haul-off rollers during the production of bent workpieces, controlled by a double-acting air/oil cylinder - Brake motor 5.5 kw, approx. 2800 rpm - complete electrical equipment for three-phase current 400/690V/50 Hz - complete electronic equipment installed in a separate Rittal control cabinet - 1 program for the production of desired workpieces according to specifications. - Program on customer request in German language - Display and texts in German on customer request - 1 transmission cable from laptop to PLC control unit - 1 transmission cable from laptop to control panel Lfjnz0mgjr - 1 spare battery - 1 operating manual with manufacturer's documentation for purchased parts - Switch cabinet key - 1 plastic tube for ball screw nut - Base plates for switch cabinet - 1 laser in cardboard box - 1 key for program confirmation Purchase price:64330 EUR

more

Listing

Rödermark

1,021 km

SUNRISE IW 80 SD

Call

Condition: good (used), Year of construction: 2004, machine/vehicle number: 347822, Lg.No. 23236 Technical data: - Flat steel shear cuts up to 450 x 15 mm - up to 300 x 20 mm - section steel shear - cuts L-steel at 90° up to 150 x 13 mm - bar steel shear - cuts round steel up to 45 mm - square steel up to 45 mm - notching device up to 12 mm - no notching tool available ! - punching machine - punching force 850 KN - with stop table Bc3jaxzb8ps - throat 510 mm - punches in steel up to 26 mm Ø in 22 mm - 50 mm Ø in 12 mm - various punches + dies - support table - E. contact stop - drive 400V / 7,5 kW - space requirement approx. W 1050 x H 1900 x D 2300 mm - Weight approx. 2850 kg

more

Listing

Lüdenscheid

870 km

automatic bar turning machine

TRAUB TK 42

€3,900

Earth cable peeling machine

Call

Condition: good (used), Year of construction: 1979, - spindle passage 42 mm - max. turning length 100 mm - 2 side supports - 2 vertical supports - weight feed S9xvl Dimensions LxWxH: - machine 2200 x 1200 x 1600 mm, weight 1800 kg - tube 5200 x 600 x 1200 mm, weight 400 kg

more

Listing

Mannheim

1,035 km

KAB-W

Call

Condition: new, Year of construction: 2023, Cable cutting machine for heavy cables with hard rubber or PVC sheathing and steel armor. Cables are cut by a very strong fixed blade. The cable is fed through the feed chute via the traction rollers and does not need to be held. Very easy adjustment of the cutting depth and the traction force of the drive rollers by means of a handwheel. Feeding speed can be adjusted. Equipped with automatic lubrication system. Drive : Electric 400 Volt - 11,0 kW Cutting speed : approx. 10-25 m/min Lzshgjyg Cutting capacity : 30 - 180 mm dimensions : 1.500 x 1.300 x 1.600 mm Weight : 1.500 Kg from stock, immediately available

more

Auction

Four bar injection molding machine

KraussMaffei KM 160-1000 PX

Condition: excellent (used), Year of construction: 2018, Operating hours: 9,585 h, Functionality: fully functional, Power meets flexibility The all-electric PX series is the answer to your questions about more flexibility with further increasing productivity. The PX series impresses with flexibility throughout its entire service life. TECHNICAL DETAILS Control system: MC6 clamping force: 1.600 kN - toggle lever tie bar size: 520 x 470 mm platen size: 710 x 660 mm installation height: 200 - 500 mm opening stroke: 950 mm ejector stroke: 150 mm Ejector force: 33 kN DETAILS INJECTION SIDE screw diameter: 55 mm displacement: 523 ccm injection pressure: 1.904 bar Screw length: 20 l/d Screw speed: 243 rpm Screw torque: 827 N Plasticizing flow: 43 g/s PS Ci7ebjnsvq Injection flow into the atmosphere: 297 g/s PS Number of heating zones: 6 MACHINE DETAILS machine dimensions L x W x H: 6.700 x 1.600 x 2.300 mm Total weight: 10.900 kg EQUIPMENT Leveling elements 2x water battery 10 - compartment Integrated hot runner control with 24 control points Low-wear plasticizing unit with non-stick coating Servo motor driven clamping system and injection unit 2 x pneumatic valve with 5/2 way valve Maintenance unit for compressed air Electric ejector drive Injection unit with increased injection capacity Integrated servo hydraulics Adjustable nozzle contact pressure Additional sockets (3x CCEE 16 A, 1X CEE 32 A, 3x Schuko) Interface for temperature control units 3 freely programmable inputs and outputs each Hydr . Control for valve gate 1 hot (cold) channel valve gate nozzle (1 piece 4/3 - way valve with 2 solenoid coils) Function: Opening of the nozzle time delayed adjustable from start of mold closing. Closing of nozzle time-delayed adjustable from end of holding pressure Electric ejector drive

Four bar injection molding machine

Auction

Arburg Allrounder 370 C 800-350

Condition: ready for operation (used), Year of construction: 2002, Operating hours: 65,000 h, Functionality: fully functional, TECHNICAL DETAILS Clamping force: 800 kN - fully hydraulic beam size: 370 x 370 mm platen size: 570 x 570 mm installation height: min. 250 mm distance between platens: max. 750 mm opening stroke: 500 mm ejector stroke: 175 mm Ejector force: 40 kN Centering moving platen D: 125 mm centering fixed platen D: 125 mm DETAILS INJECTION SIDE screw diameter: 35 mm displacement: 139 ccm injection pressure: 2500 bar Screw length: 23 l/d Screw stroke: 150 mm Screw speed: 57 rpm Screw torque: 560 N Plasticizing flow: 2 g/s PS Number of heating zones: 4 Nozzle stroke: 300 mm MACHINE DETAILS Machine dimensions L x W x H: 4,200 x 2,450 x 2,100 mm Total weight: 3.460 kg CONTROL Type of machine: Linear robot Multilift H Make: Arburg Control: Multilift H Year of manufacture: 2002 Handling weight: 5 kg Screen text: German EQUIPMENT On-screen text German Compact Flash drive Core pull hydraulic 2x Air valve 1x conveyor belt Protective housing with water battery Leveling elements Interface for control B3ptiflo Tool heating 12x

Two bar injection molding machine

Auction

DR. BOY 22 M

Condition: repair required (used), Year of construction: 2002, Operating hours: 39,677 h, Functionality: not functional, Information about the control error on request. TECHNICAL DETAILS clamping force: 220 kN - hydraulic tie bar dimension: 254 mm platen size: 425 x 400 mm installation height: min. 200 mm distance between platens: max. 400 mm opening stroke: 200 mm ejector stroke: 80 mm Ejector force: 18 kN Centering moving platen D: 60 mm centering fixed platen D: 110 mm DETAILS INJECTION SIDE screw diameter: 18 mm displacement: 20 ccm injection pressure: 2587 bar screw length: 20 l/d screw stroke: 80 mm Screw speed: 500 min Screw torque: 180 N Plasticizing flow: 2 g/s PS Number of heating zones: 4 Nozzle stroke: 180 mm MACHINE DETAILS machine dimensions L x W x H: 2.300 x 810 x 1.630 mm Total weight: 860 kg Ci7dl0y7ti EQUIPMENT Screen text german Machine with water battery Machine without material hopper Leveling elements Hopper

hydr. bar shear with hole punching machine

Listing

Deutschland

1,034 km

Bar pointing machine

Schwanog Type 667P/A

Call

Condition: not inspected (used), Year of construction: 1981, Bar pointing machine Schwanog Type 667P/A 9bivqbedvk Year of construction: 1981 Recording diameter: Ø6-67mm Cutting head speed: 235 rpm Engine speed: 1,400 rpm

more

Listing

Kreuztal

907 km

KINGSLAND XS 115 115 to

Call

Condition: good (used), Technical data: Punching pressure: 115 to max. punching capacity: ∅ 40 x 20 mm working radius: 355 mm flat steel: 380 x 55 mm or 600 x 15 mm angle steel: 150 x 150 x 18 mm Square steel: 55 x 55 mm Round steel: ∅ 55 mm Motor power: 7.5 kW Dimensions (length x width x height): approx. 2050 x 1050 x 2050 mm Weight: approx. 3.3 tons Caxyvn02ow The seller is not liable for writing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

more

Listing

Gumprechtsfelden

1,508 km

Potato & vegetable peeling machine

FLOTT 25K

€7,000

FCA Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2018, HIGHLIGHTS Dlvwnh robust construction made of stainless steel (rustproof) Absolute safety thanks to personal protection circuit Automatic peeling time Gentle peeling method: required water is accumulated and a soft water cushion is formed - no pushing or hitting gentle emptying Versatile use thanks to the different peeling inserts TECHNICAL DETAILS Total volume: 25 - 30 kg Capacity: 800kg/h Products: potatoes, beetroot, carrots, celery, ginger, kohlrabi, root vegetables, fish... MACHINE DETAILS Power: 1.5 kW Operating voltage: 3 ~ 400V / N/PE Water connection: 25 DN Dimensions: 750 x 735 x 1195 Weight: 133 / 185 kg

more

Listing

Mannheim

1,035 km

Cable peeling machine

Maxi 100 Maxi 100

Call

Condition: new, Year of construction: 2022, Drive: Electric 400 v - 3.0 kW Cutting speed: approx. 27 m / min Cutting capacity: 6-100 mm Dimensions: 700 x 700 x 1,300 mm Weight: 190 kg 2hj0odfd3

more

Listing

Barleben

1,048 km

Bar Reeling Machine

SHREE RAMKRISHNA ENGINEERING WORKS BR2

Call

Condition: new, Year of construction: 2022, Straightening machine is mainly used for precision straightening for the metal bar after peeling or pre-straightening for the metal bar. The machine adopted special curve between upper concave and the lower convex two straightening rolls to realize calendaring Dj2rbf and straightening at the same time, which greatly improved the working efficiency.

more

Listing

Spiez

1,237 km

Cable peeling machine Maxi 100

IUT Beyeler AG Maxi 100

Call

Condition: new, Year of construction: 2023, The Maxi 100 is a cable peeler designed to separate copper or aluminum from the housing in electrical cables, whether plastic, lead or any other material of varying thickness. Power consumption: 380 volts / 2.2 kW Weight: 230 kg Possible sizes: 6 - 90 mm Dimensions: Edaxaf Height 1200 mm width 760 mm length 1850 mm Processing speed: 22 meter/min

more

Listing

Berlin

(dealership location)

1,143 km

Semi-Automatic Peeling and Coring Machine

PND Fruit Processing Machinery PL1D

Call

Condition: ready for operation (used), Year of construction: 2016, Fruit diameter: 100-250mm, skin thickness: 3-10mm, connected load: 1.5kW, width: 800mm, height: 2200mm, weight: 650kg. Cdlsmuhqfc

more

Listing

Cestona

1,352 km

Hydraulic Bar shearing machine

SOLING SCR 125

Call

Condition: excellent (used), Brand: SOLING Model: SCR 125 Tipo: Automatic hydraulic shear Maximum cutting diamante: 20 mm Minimum cutting diameter: 6 mm Bar loader up to : 6500 mm Maximum cutting length: 1.000 mm Minimum cutting length : 180 mm Components B9i2gd8pqs Automatic bar loader Hydraulic cutting head Electric desk Adjustable cutting length stop Manual

more

Listing

Stary Dwór

1,399 km

Onion Peeling Machine - ProdMA-1

ProdMa Sp. z o. o. ProdMA-1

€70,500

Vegetable peeling machine

Call

Condition: new, Year of construction: 2023, ProdMa produces onion peeling machines according to your wishes. Efficiency, high productivity and communication with our clients are our top priorities. Accordingly, we are guided by the already existing machines on the market, analyze and optimize problem areas to create an individual peeler for your company. Here we offer the smallest machine from our portfolio: ProdMA-1 Length 5.800 mm Width 850 mm Height 2.000 mm Voltage 400 V Power consumption 2,2 KW compressed air 1 m3 / 10 Bar Peeling specification 40 – 100 mm 8l9dzhyn9g Peeling performance 40 – 80 /min. (depends on settings)

more

Auction

FLOTT 25K

Condition: good (used), Year of construction: 2018, machine/vehicle number: 65922, Functionality: fully functional, HIGHLIGHTS - robust construction made of stainless steel (rustproof) - absolute safety due to personal protection circuit - automatic peeling time - gentle peeling: required water is accumulated and a soft water cushion is formed - no bumping or beating - gentle emptying - versatile use thanks to the different peeling inserts TECHNICAL DETAILS total volume: 25 - 30 kg Capacity: 800 kg/h Products: Potatoes, beet, carrots, celery, ginger, kohlrabi, root vegetables, fish ... Bbwcaqtzutu MACHINE DETAILS power: 1,5 kW operating voltage: 3 ~ 400 V / N/PE water connection: 25 DN dimensions: 750 x 735 x 1195 Weight: 133 / 185 kg

The machine for peeling onions from the skin has become

Listing

IMIZUNI Sp. z o.o. IMIZUNI SLM-2R/2000/300

Środa Wielkopolska

1,402 km

IMIZUNI Sp. z o.o. IMIZUNI SLM-2R/2000/300

€49,500

Dough Dividing Machine Bartech

Call

Condition: new, Year of construction: 2022, Bin capacity: 40 [kg]. Capacity: Up to 140 [bulbs/min]. Raw material size: 45 - 140 [mm]. Overall width of device: 1050 [mm]. Total height of the machine: 1880 [mm]. Total length of machine: 4830 [mm]. Number of operating paths: 2 Ptyl0a loading height of onion: 1000 [mm] Height of onion pick-up: 700 [mm] Height of waste collection: 400 [mm]. Power supply: 3 x 400 [V] / 50 [Hz] Installed power: 1,2 [kW]. Compressed air connection: 8-10 [bar]. Air consumption: 1,9 [m3/min]. Noise level: Over 80 [dB]. Construction materials: Stainless steel and plastics approved for contact with food CE certificate: yes Cutter: no

more

Listing

Северна Македонија

2,385 km

Bar machine

Call

Condition: not inspected (used), Bar machine D7sbegs

more

Listing

Panevėžys

1,735 km

Bartech BAR 10-LEI

€6,500

Georgian bar cutting machine

Call

Condition: excellent (used), Year of construction: 2012, Dividing 100-600gr Width 610mm Wodgvepr Depth 1350mm Height 1540mm Belt width 245mm Belt length 750mm Engine power 1,5kW Weight 550kg

more

Listing

Velžys

1,744 km

HEGLA AM 2000

Call

Condition: like new (used), Year of construction: 1995, Georgian bar cutting machine HEGLA AM 2000 Year of production: 1995 2va3uu Very good and clean condition Availability immediate

more

Listing

Środa Wielkopolska

1,402 km

Onion Peeling Machine

IMIZUNI Sp. z o.o. IMIZUNI LDOC-2R/8500

€115,500

Industrial dishwasher Basket conveyor machine

Call

Condition: new, Year of construction: 2022, Hopper Capacity: 40 in [kg] Capacity: up to 140 [Cebul/min] Raw Material Size: 45 – 100 [mm] Total Device width: 1700 in [mm] Total height of device: 2200 in [mm] Total length of the device: 8500 in [mm] Number of working paths: 2 Ptylnq Onion Loading Height: 1000 in [mm] Onion Reception Height: 850 in [mm] Waste collection Height: 400 in [mm] Power supply: 3 x 400 in [V]/50 [Hz] Installation power: 3 [kW] Compressed air connection: 8-10 in [bar] Air consumption: 1.9 [m3/min] Noise level: Over 80 [dB] Construction Material: Stainless steel and food contact plastics CE Certification: Yes Cutter: Yes

more

Listing

Petershagen

879 km

HOBART CS-A

€7,450