Used Bar Streight for sale (14,215)

Condition: excellent (used), Year of construction: 2003, pressure: 13 bar, 1 fired steam boiler ----- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 sqm Boiler capacity max. : 1.250 kg/h Operating overpressure : 13,0 bar increased test overpressure : 24.05 bar Water content at NW approx. : 993 l Water content full approx. : 1,365 l Year of construction : 2003 Djdpfx Agsuugi Segewb CE mark : 0036 equipped with Weishaupt gas burner type G7/1-D, ZMD-LN, 250-1,550 kW, 15-500 mbar, gas control system, switch cabinet, feed water pump and the existing coarse and fine fittings. Econmizer: Eco 3, 82 kw, 31 bar, 238°C, 28 ltr.

Condition: good (used), Year of construction: 2012, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 66 m³/h, operating pressure: 120 bar, type of cooling: air, Equipment: documentation/manual, type plate available, 1 high-pressure piston compressor including acoustic hood and 1500 liter compressed air tank Ran trouble-free until the entire production was shut down. Manufacturer: J.A. Becker & Söhne Type: SV 1101/120 Number of cylinders: 3 Number of pressure stages: 3 Volume flow: 66m³/hour Compression pressure: 120 bar Dodpfx Agjvgrp Sogewb Drive power: 22 KW Speed: 1457 rpm Year of construction: 1998 Compressed air tank Manufacturer: FMS Capacity: 1500 liters Operating pressure: 120 bar Year of construction: 1998 Product data sheet as PDF attached under the ad description !!!

Condition: used, Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit with: 2x motors and oil cooler -2x hydraulic pumps: from Truninger type QT23-005/22-005 -per pump max. Pressure: 320 bar -per pump max. Liter output: 7.9 l/min (5 cm³/U) -1x drive: 11 kW 1460 rpm -1x drive: 5.5 kW 1460 rpm -Hydraulic filter -Hydraulic tank -Oil cooler with: fan -Dimensions: 1500/1100/H1900 mm -Weight: 845 kg Dwodpfxsc Rwcts Aggob

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 80 bar -Liter output: 18 l/min -Hydraulic tank: liters -Dimensions: 700/355/H830 mm Dedpfxob Uhuho Aggewb -Weight: 200 kg

Condition: used, Pressure reducers, pressure regulators, manometers Dodpfx Agob Uhuxegjwb -for nitrogen -Inlet pressure: max. 200 bar -Outlet pressure: 0 - 50 bar adjustable -Number: 1x reducer available -Price: per piece -Weight: 1.6 kg/piece

Year of construction: 1981, condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 25 l/min Dwsdpschp Azofx Aggsb -Hydraulic tank: mm -Motor: kW rpm -Hydraulic valve -Pressure relief valve -pressure clock -Filter -Dimensions: 500/800/H850 mm -Weight: 248 kg

Condition: used, Year of construction: 2008, Technical details: number of spindles: 6 Dodpfoluhcgjx Aggswb spindle passage: 18 mm turning length: 63/50 mm weight of the machine ca.: 4,5 t spindle drive motor: 11 kW

Year of construction: 2022, condition: good (used), Used compressed air tank 500 litres horizontal, painted 11 bar (without fittings set) incl. container papers (2 pieces available in total) Year of construction: 2022 High-quality compressed air tank in lacquered design. Specifications: Dwodpjm Drx Iofx Aggob -Volume: 500 liters -Ab. Operating pressure: 11 bar -Medium: Air -Diameter: 600 mm -height: 710 mm -Weight: 165 kg -Connection compressed air inlet: 1 x G 2" -Connection compressed air outlet: 1 x G 2" -Connection safety valve: G 1/2" -Connection condensate drain: G 1/2" -Maintenance opening: see compressed air inlet and outlet Production and testing according to EC directives AD 2000 Design temperature: -10 °C to + 120°C Surface coating: lacquered Vistit our store.We always have a wide range of new and used compressors and dryers.

Condition: used, • With digital display for length adjustment via handwheel. • Long support table on the left and right • Storage shelf behind Dwsdpfxjwcm Nqe Aggsb • Extractor • Spare saw blades • Price upon request

Condition: new, functionality: fully functional, machine/vehicle number: 1.286-960.0, operating pressure: 250 bar, high-pressure hose length: 10,000 mm, empty load weight: 70 kg, input voltage: 400 V, warranty duration: 24 months, The HD 10/25-4 S Plus cold water high-pressure cleaner is ideal for ergonomic and user-friendly operation. With the Kärcher EASY!Force Advanced trigger gun, it can be operated comfortably without holding the gun. Pressure and water flow can be adjusted using the Servo Control regulator between the lance and trigger gun. The pressure reduction allows for quick response to sensitive surfaces – without changing the nozzle. In addition, the Vibrasoft rotor nozzle significantly reduces vibrations on the spray lance. Assistance systems and an LED status display simplify operation. Technical Specifications: Condition: NEW Catalog Number: 1.286-960.0 Dwodpjxpf Hxsfx Aggob Current Type (Ph/V/Hz): 3 / 400 / 50 Flow Rate (l/h): 500-1000 Working Pressure (bar): 80 - 250 Maximum Pressure (bar): 280 Inlet Temperature: max. 60°C Power Rating (kW): 8.8 Connection Cable (m): 5 Weight (with accessories) (kg): 70.3 Dimensions (L × W × H) (mm): 607 x 518 x 1063 Included: Handgun: EASY!Force Advanced + Softgrip Insert Hose: 10m DN8, 315 bar - Premium Quality Spray Lance: 1050 mm Power Nozzle Dirt Blaster Servo Control Features: 4-pole three-phase motor with air and water cooling 3-piston axial pump: with stainless steel pistons Pressure shut-off Integrated fine water filter Oil level sight glass Brass water inlet Design: - Compact upright design concept thanks to vertically mounted motor and pump unit - Small footprint and space-saving external dimensions. Easy to maneuver and transport. Maximum stability ensures the device remains stable. - Slow-running 4-pole motor with water and air cooling, robust pump with stainless steel pistons and brass cylinder head - Long service life with low maintenance costs. High performance with high efficiency. With suction function and water temperature up to 60°C. Advantages: - Ergonomic Vibrasoft dirt blaster, reduces vibrations by up to 30%. Reduces noise and sound levels. Enables effortless and extended work with the rotary nozzle. - Assistance systems and LED status display - Pressure and water flow are adjustable using the servo control regulator between the lance and gun.- EASY!Force Advanced for fatigue-free work without holding forces.

Condition: used, Bar Feeder, Automatic Bar Feeder, Used Machine Manufacturer: IEMCA Model: Master 100 F/R Overall Dimensions: Width: 4900 mm Depth: 1115 mm Height: 1800 mm Weight: 2200 kg Dedpfoxab Adjx Aggswb Year of Manufacture: 2012 Electrical Data: 400V; 8.4A Bar Diameter Range: 10–100 mm Bar Length: 1100–4200 mm Maximum Bar Weight: 180 kg Maximum Feeding Speed: 500 mm/sec Magazine Types: UP: 500 mm usable length MP: 290–330 mm F: 2.5-ton stacked magazine Changeover Time: 31 seconds Installed Power: 1.5–3 kW Pneumatic System Pressure: 6 bar

Condition: used, empty load weight: 6,800 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2005, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, 3-axle stainless steel tank semi-trailer – Manufacturer: Magyar – Type/Model: Foodstuff Tank 30,000 L – Pressure tank 2.0 bar – 3 compartments (11,000/6,000/13,000 L) – First registration: 19/09/2005 – Number of axles: 3 – Suspension: Air – Lift axle – Axle type: BPW – Brake: Disc – Length: 11,532 mm – Width: 2,550 mm – Height: 3,610 mm – Unladen weight: 6,800 kg – Body manufacturer: Magyar – Tank material: Stainless steel – Total tank volume: 30,000 L – Tank compartments: 3 – Insulated – CIP cleaning – Djdoxtumcepfx Aggswb

Condition: good (used), Year of construction: 2006, Working height: 890 mm The machine was last used to process Helima's 26 and 45 rungs. It can be converted to process other types of rungs. Dwedpoxlrilefx Aggeb Width: 900 mm Depth: 1200 mm Total height: 1100 mm Weight: approx. 120 kg

Year of construction: 2005, condition: excellent (used), functionality: fully functional, elumatec SBZ150 Profile Machining Centre 6.0 m 5-axis control. Efficient machining of aluminium and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Robust machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, with 3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color screen and disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator) Analog modem (customer must provide an analog telephone line) Dedpfxsw A Rv Io Aggswb Technical data: Travel range X-axis: max. 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on the milling range see drawing no. 150 05 17 08 Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100–22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: 100 mm max. Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper. Included accessories: Automatic tool changer (without tool holders); Dual-circuit clamping system with 2 pneumatically retractable material stops; Automatic clamp detection and positioning; 8 horizontal pneumatic material clamping units; Tool presetting gauge Front light barrier Saw blade D400 with mount Angle milling head Important: The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us. Incl. Angle milling head for underside machining

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Yale, hydraulic pump hand pump Dsdpjwwqxxsfx Aggewb -Type: HPS-1.7 -Pressure range: max. 700 bar -Tank capacity: 0.7 l -Quantity: 1x hand pump available -Dimensions: 720/200/H170 mm -Weight: 8.5 kg

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. Fully retrofitted in 2019 (completely new mechanics and electronics) Working range: Ø 20 – Ø 80 mm Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: Dedowqb Scopfx Aggjwb - Front guiding system - Peeling head with 4 knifes - Rear guiding system Bar extraction carriage Main motor and transmission Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, 1 used steam boiler Dwedpfowra Ewjx Aggsb ----- Manufacturer: LOOS Gunzenhausen Type: U-HD 1250 Heating surface approx.: 20 sqm Max. boiler output: 1,250 kg/h Operating pressure: 13 bar Increased test pressure: 23.4 bar Water content at normal level approx.: 993 l Full water content approx.: 1,365 l Year of construction: 2000 Equipped with Weishaupt gas burner type G7/1-D, ZMD, 300-1,750 kW, gas control section, control cabinet, feedwater pump and the available rough and fine fittings.

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Reishauer, wedge bar chuck Chuck size: Ø 165 mm -Recess mounting: Ø 268 mm -Bolt circle: Ø 140 mm -Through hole: Ø 40 mm -Dimension: Ø 165 x 120 mm -Weight: 11.7 kg Dsdpfewn Eaxjx Aggewb

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit filter control valve -Type: MS9-LFR-3/4-D7-EUM-AG-BAR-AS 562531 -Quantity: 1x filter control valve available -Dimensions: 440/115/H205 mm Dsdex Ryhiopfx Aggjwb -Weight: 3 kg

Condition: used, loading space length: 103,500 mm, loading space width: 26,000 mm, loading space height: 37,300 mm, Year of construction: 2014, For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone at ...). Rohr RZK/18 IV refrigerated box body, LBW Refrigeration: Carrier Supra 950U, tail lift: BÄR BC 2000S4-C4, BPW axles, permissible total weight: 18,000 kg, tare weight: 6,980 kg, payload: 11,020 kg, cargo space dimensions: L 6,830 mm, W 2,490 mm, H 2,330 mm, cargo volume: approx. 40 m³, tire tread: 1st axle 5-7 mm, 2nd axle 5-6 mm. Dwjdpfx Asynrhheggsb Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) will be happy to assist you. Further information can be found on our website. ... Errors, changes, and prior sale are subject to change!!! = Further information = GVW: 18,000 kg Please contact Tobias Ebert for further information.

Condition: used, empty load weight: 5,500 kg, maximum load weight: 12,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2012, loading space length: 7,700 mm, loading space width: 2,500 mm, loading space height: 2,300 mm, loading space volume: 44 m³, total length: 7,700 mm, suspension: air, tire size: 385/65 22,5, tire condition: 30 %, color: grey, Year of construction: 2012, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, Equipment: ABS, tail-lift, truck registration, Reference number for inquiries: 40818 Krone, S 24 * Year of manufacture: 2012 * ABS, anti-lock braking system * EBS, electronic braking system * Tail lift * Alloy wheels * Air suspension * Tandem trailer * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Duomatic air connection * 15-pin connector plug * Lift and lowering device * Rear support * Suspension: air * Gross weight: 18,000 kg Dsdpfx Ageyunzwegswb * Unladen weight: 5,500 kg * Payload: 12,500 kg * Permissible gross weight: 18,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 30% -- 30% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 30% -- 40% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L=7700 mm, W=2500 mm, H=2300 mm * Internal volume*: 44 m³ * Pallet spaces: 19 * Trailer: Krone * Body: Ewers swing-wall trailer * Tail lift: BÄR BC 2500, lifting capacity 2500 kg Liability disclaimer: Subject to changes, prior sale, and errors excepted. More pictures and videos are available on our homepage. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Processing of all (export) documents * Order export license plates / customs plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialists – we are happy to advise you.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, Equipment: bar feeder, chip conveyor, A rebuild was carried out by Index for €380,000! EQUIPMENT Prepared as a double 3-spindle machine Part pick-off device Thread cutting gearbox Cucci Giovanni integral loader Dwjdpfeyx Tzrex Aggsb Brankamp tool breakage monitoring and tool monitoring Cucci Giovanni bar feeder (2015) Knoll chip conveyor (2015)

Condition: excellent (used), functionality: fully functional, bar length: 1,615 mm, bar diameter (max.): 80 mm, reverse speed: 1,000 mm/s, overall weight: 580 kg, workpiece weight (max.): 250 kg, The bar feeder was purchased in 2019 and was connected to a DMG Mori NLX 2500 / 700. The bar feeder was hardly used. TECHNICAL DETAILS Connector: Harting Material Cross-Sections Round: 5 to 80 mm Square: 5 to 50 mm Hexagonal: 5 to 60 mm Bar Lengths Bar length: 500 to 1,615 mm Short bar length: 90 to 500 mm Performance Data Magazine capacity: 250 kg Bar changeover time: 30 s Feed rate: 0 to 500 mm/s Return speed: 1,000 mm/s MACHINE DETAILS Connection voltage: 230/400 V Control voltage: 24 V Power consumption: 2 kW Dimensions & Weight Weight: 580 kg Bar pusher travel: max. 1,710 mm Loading axis height: 905 to 1,252 mm EQUIPMENT Short bar kit Handheld control unit Djdpfx Asy A Rlpeggowb Remote control Safety covering Fixed protective grilles

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station Dwedpfezbhdlox Aggob -Hydraulic power unit: with hydraulic reservoir -Hydraulic pump: Pressure up to 150 bar -Flow rate: 42 l/min -Motor: Lammers 4.0 kW / 1440 rpm -Hydraulic reservoir: with filter and temperature/level indicator -Individual components: see photos -Dimensions: 630/520/H960 mm -Weight: 206 kg

Condition: used, Year of construction: 2015, Brand and Model : LNS ALPHA SL65 S Manufactured year: 2015 Diameter: 6- 67 mm Bar lenght: 300- 1550 mm Loading System: Side load Rack Loading Capacity: 1660 mm Loading: Rear X axis retraction: 300 mm Type of Headstock: Fijo/ Fixed Dwsdpfx Agjzl Uu Degjb Partial changeover: 5 min.Manual Complete changeover: 8 or less min. Motor: Servo Drive: Notched Belt