Used Barrel Press for sale (12,374)

Condition: good (used), Year of construction: 1997, Used Beyeler press brake Type PR10 200 4100 Bdjdez H Udlepfx Abuji Capacity 4100 x 200 tons Cybelec CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC-controlled Wila upper and lower clamping system Tools not included

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 697/2, Equipment: 4th hydraulic function, Hounsell Engineering 50 Tonne 4-Column Hydraulic Press – 1997 We are pleased to offer this Hounsell Engineering Ltd (UK) 50-tonne 4-column hydraulic press, manufactured in 1997. A substantial, British-built industrial hydraulic press with heavy-duty construction, previously used in a production environment and now available for sale due to surplus requirements. Suitable for a wide range of pressing, forming, assembly, fabrication, maintenance and general engineering applications. Machine specification: Manufacturer: Hounsell Engineering Ltd, UK Type: 4-Column Hydraulic Press Rated capacity: 50 tonnes Year of manufacture: 1997 Machine / Serial No.: 697/2 Stroke: 200 mm System pressure: 250 bar Pump motor: 5.5 kW Electrical supply: 415 V Control voltage: 110 V Hydraulic fluid: Texaco HD 32 Construction: Heavy-duty industrial steel Condition: Very good used condition The press was in service prior to removal and is being offered for sale as surplus equipment. With a rated capacity of 50 tonnes, the machine is capable of generating approximately 500 kN of compressive force, making it suitable for a broad range of industrial and workshop applications. Condition & Inspection The machine is offered in good used condition. Prospective purchasers are welcome and encouraged to inspect the press before purchase to satisfy themselves as to its condition, specification and suitability for their intended application. Sold as seen. No warranty is given or implied. Collection & Loading Location: Kent, England, UK Bodpjz Ib R Ijfx Abuedi Collection only due to the size and weight of the machine. Loading assistance may be available by prior arrangement. Further photographs and information can be provided, including serial plate details, overall dimensions, weight and loading arrangements. A good opportunity to acquire a substantial 50-tonne industrial hydraulic press at considerably below the cost of a comparable new machine. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks, Search terms: Hounsell Hydraulic Press, 50 Tonne Press, 4 Column Press, Hydraulic Workshop Press, Industrial Press, Engineering Machinery, Pressing Machine, Forming Press, Manufacturing Equipment, Fabrication Machinery.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, stroke length: 265 mm, throat depth: 410 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, number of axes: 6, table height: 900 mm, oil tank capacity: 250 l, overall weight: 12,500 kg, total length: 6,450 mm, total width: 2,650 mm, total height: 2,750 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, number of support arms: 2, pressing force: 175 t, clearance between the columns: 3,600 mm, distance table to ram: 530 mm, table length: 4,050 mm, table width: 104 mm, type of input current: three-phase, Equipment: CE marking, safety light barrier, 2013 Durma AD-S 40175 CNC Press Brake – 6 Axis – Cybelec ModEva 10S Control Used 2013 Durma AD-S 40175 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Cybelec ModEva 10S graphic control, Y1, Y2, X, R, Z1 and Z2 axes, CNC motorised crowning, laser guards, tooling and rear safety doors. Manufacturer: Durma Model: AD-S 40175 Axes: 6 Year: 2013 Capacity: 4000mm x 175T Control: Cybelec ModEva 10S Control Includes: Large Selection of Top & Bottom Tooling Description 2013 Durma AD-S 40175 CNC Press Brake, a high-quality 6-axis CNC hydraulic press brake with 4050 mm bending length and 175 tonne bending force. This machine is ideal for precision sheet metal bending, fabrication workshops, engineering companies, subcontract metalwork and production environments requiring a robust, accurate and well-specified press brake. This Durma AD-S 40175 is fitted with a Cybelec ModEva 10S Graphic CNC Control, offering 3D graphical programming and automatic bend sequences. The machine has 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2, giving excellent flexibility for accurate bending and efficient backgauge positioning. The machine is in very good condition and comes complete with a large selection of Euro-style top and bottom press brake tools, laser guards, foot pedal, CNC controlled motorised crowning, quick-release top tool clamps and rear safety doors. Key Features Bending length: 4050 mm Bending force: 175 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Cybelec ModEva 10S Graphic CNC Control Condition: Very good condition Crowning: CNC controlled motorised crowning Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications Model: AD-S 40175 Bending force: 175 tonnes Bending length: 4050 mm Distance between columns: 3600 mm Y-axis rapid speed: 120 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 100 mm/s Crowning: Motorised Daylight: 530 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 Backgauge finger blocks: 2 X-axis travel speed: 500 mm/s X-axis travel: 650 mm R-axis travel speed: 350 mm/s R-axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 litres Machine dimensions: 6450x2650x2750 mm Machine weight: 12,500 kg Cybelec ModEva 10S Graphic CNC Control The machine is fitted with a Cybelec ModEva 10S Graphic CNC Control, a user-friendly press brake control designed for graphical programming and efficient bending setup. Control features include: 3D graphical control interface 10.4” colour TFT screen 128 MB RAM 128 DM main memory Easy Cursor operation Automatic bend sequence calculation Single-page part programming capability CAD/CAM sequence viewing support Included Equipment This used Durma AD-S 40175 press brake is supplied with: 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Bdedpfx Aez Imc Nsbuoi Cybelec ModEva 10S Graphic CNC Control Large Selection of Euro-style top & bottom tooling CNC controlled motorised crowning Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Front support arms Backgauge finger blocks

Condition: used, Year of construction: 1987, machine/vehicle number: 17251, Pressing force: 63 tons, with draw cushion and separate hydraulic unit. Bdjdoz Nhp Iepfx Abuoi

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Bdeds Ad Hq Sopfx Abuoi PRESS Pressing force: 40 t Drawing cushion force: 40 t WORK TABLE Table dimensions: 700 × 630 mm Number of table slots: 3 MACHINE DETAILS Manufacturer: LAUFFER Machine type: Hydraulic press Length: 1,000 mm Width: 800 mm Height: 2,500 mm Weight: 10,000 kg

Condition: used, functionality: fully functional, Year of construction: 1992, machine/vehicle number: 56979, overall weight: 7,500 kg, total length: 5,000 mm, total width: 1,200 mm, total height: 2,200 mm, input voltage: 380 V, input frequency: 50 Hz, pressing force: 135 t, type of input current: AC, machine is functional ok, from down linear tool is one channal damage. perfect machine for starters or when a company have only periodic press jobs. we sale out by fact that we need the space. machine is unther still on power Bdodpj Aarbhsfx Abuoi

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, HACO ERMS 2040 (83331) Technical condition: Good Stroke length: 2100 mm Tonnage: 40T Type of press brake: Synchronous Back gauge: X-axis CNC controlled, R-axis adjustable in height (manual) Length of back gauge: 800 mm Overhang: 200 mm Control system: ATS 595 (CNC control system, NEW) Bdodpfx Abs Adny Usuei Motor power: 4.1 KW 380V Tooling: Yes, upper and lower Tooling standard: European standard Serial number: 83331 Year of manufacture: 2008 Overall width: 3000 mm Overall height: 2250 mm Overall depth: 1800 mm

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Quantity: 4 units Machine type: Mechanical stamping presses Manufacturer: Predominantly Berg & Schmid (?) MACHINE DETAILS Dimensions Length: 300 mm Bdjdpfx As Adu Eksbuei Width: 200 mm Height: 300 mm Weight Weight: 20 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Bdedpfx Abo Ad Ifdeuei Machine type: Eccentric press Manufacturer: EBU Model: H50F Serial number: P5318482 Rated force: 500 kN Stroke adjustment: 8–120 mm Ram adjustment: 70 mm Stroke rate: 115 min⁻¹ Table Table dimensions: 650 × 520 mm Hole diameter: approx. 120 mm MACHINE DETAILS Drive Motor power: 3 kW Dimensions and weight Length: 1,500 mm Width: 800 mm Height: 2,400 mm Weight: 3,000 kg EQUIPMENT Guards for the flywheel are available.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, operating hours: 300 h, machine/vehicle number: C15_20250015, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, pressing force: 44 t, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Bdjdpo Ad Acdjfx Abuoi Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, operating hours: 300 h, machine/vehicle number: C15_20250016, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, pressing force: 44 t, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Bsdpfx Abe Ad Ackjujdi Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: used, Format: 0x0 Bdedpfx Aex Rh D Sebusi Equipment: Toggle press for beech corners, 40 mm stroke, 73 mm throat depth

Condition: good (used), Year of construction: 1977, Druck 250 t Staenderweite 1120 mm Hub 250 mm Entfernung Tisch/Stoessel, gr. Hub oben, Verst. oben 500 mm Tischflaeche 1100 x 900 mm Tischhoehe ueber Flur 950 mm seitlicher Staenderdurchgang 700 mm Stoesselflaeche 1100 x 900 mm Geschwindigkeit ab mm/s Geschwindigkeit auf mm/s Arbeitsgeschwindigkeit mm/s Ölinhalt 730 l Antriebsleistung 56 kW Gewicht 25 t Raumbedarf (BxTxH) 2,3 x 1,55 x 3,96 m Bdodpfx Abex Ug Deuji Zusatzinformationen u mit oelhydr. Antrieb, hydr. (§20) und elektr. Steuerung nach UVV, Lichtschranke (Sick), obere und untere Hubbegrenzung, druck- und wegabhaengig steuerbar, Schnittschlagdaempfung, Kurzhubsteuerung, neue Steuerung (Mitsubishi), Sicherheitssteuerung (PNOZ Multi), Bildschirmsteuerung mit Touch-Screen, Schaltschrank

Condition: new, Year of construction: 2026, Capacity: 15 - 55 kg/h Briquette diameter: 55 mm Hopper size: octagonal, diameter 750 mm Hopper height: Dimensions: 1500 mm x 900 mm x 1065 mm (L x W x H) Bedpfx Abjk Utqyousdi Motor power: 4 kW Control cabinet: electronically controlled via PLC Weight: 450 kg

Condition: used, Offered is a hydraulic press brake with 500kN pressing force. Stroke: max. 215mm. Operating pressure: max. 320bar. Stopping time: max. 95ms. Equipped with Lazer Safe laser guarding system. Inspection possible by arrangement. Bjdpfx Aj Agwqwebujdi

Condition: used, Year of construction: 1988, operating hours: 7,355 h, functionality: fully functional, machine/vehicle number: 660/88, total width: 1,505 mm, total height: 705 mm, total length: 1,375 mm, space requirement width: 1,370 mm, space requirement length: 1,600 mm, space requirement height: 1,125 mm, We are selling a Spänex briquetting press, model SHB 50. The machine is not assembled, but it can be connected to power to demonstrate its functionality. The press includes a large chip collection container, allowing it to be placed under an extraction system and automatically fed with chips. The press can, of course, also be operated without the collection container. Documents (instructions and wiring diagram) are available. Bodj Agvn Dspfx Abusdi The functionality of the system has been tested. We purchased the system ourselves, but were unable to install it due to structural limitations. You can view the system in the brochure under the PDF file "Assembly Example," which shows how it looks when assembled. The extraction system shown in the image is not included in the offer.

Condition: used, Year of construction: 2008, machine/vehicle number: 240-124, functionality: fully functional, pressing force: 160 t, stroke length: 800 mm, table width: 1,600 mm, table length: 1,200 mm, table height: 650 mm, total length: 1,900 mm, total width: 3,600 mm, total height: 3,300 mm, Equipment: documentation/manual, Hydraulic sub-platen press – 160 T – 1,200 × 1,600 mm For sale is a hydraulic sub-platen press from the manufacturer LÄPPLE with a maximum pressing force of 160 T. The machine has a table size of 1,200 × 1,600 mm, an open height of 1,050 mm, and a stroke of 800 mm, and is particularly suitable for forming, straightening, pressing, and assembly work in industrial applications. The press is equipped with a PILZ control system and has an electrical version for operation on a 3 × 400 V AC power supply. ##### Technical data + information: Hydraulic sub-platen press – 160 T – 1,200 × 1,600 mm ==== General information - Reference ID: TPT-07 - Manufacturer: LÄPPLE - Type: Hydraulic sub-platen press - Model: TV1600-50 - Machine number: 240-124 - Year of manufacture: 2008 - Pressing force: 160 T - Table size (working area): 1,200 × 1,600 mm - Table height: 650 mm - Open height: 1,050 mm - Stroke: 800 mm - Overall height: 3,300 mm - Overall width: 3,600 mm - Overall depth: 1,900 mm - Basement required: no ==== Hydraulic cylinder Bsdpfx Abe Ad Antsusdi - Max. working pressure: 240 bar - Idle travel downwards: 10 mm/s - Idle travel upwards: 28 mm/s - Initial pressing speed: 10 mm/s ==== Hydraulics & drive - Main motor: 22 kW ==== Control system - Control system: PILZ - Control panel: on the frame - Electrical design: EPLAN 5.40 - Electrical documentation: wemascon Zeulenroda GmbH ==== Safety - Safety control system: PILZ - Light curtain / light barrier: available - Two-hand operation: available - CE-compliant design - Slug damping: no - Maintenance platform: no ==== Electrical connection - Main supply: 3 × 400 V AC - Frequency: 50 Hz - Power supply: PE/N - Fuses: 63 A - Rated current of the system: 47 A - Control voltage: 24 V DC ##### Application areas: Forming, straightening, pressing, assembly work, toolmaking, mechanical engineering, metal processing, maintenance, pressing operations, series production (Hydraulic sub-platen press, sub-platen press, hydraulic press, LÄPPLE press, LÄPPLE TV1600-50, 160 T press, 160-ton press, forming press, straightening press, pressing press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive and European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength lies in the design and manufacture of customized machines and press automation. We distribute tailor-made hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: used, Year of construction: 1998, machine/vehicle number: 845, functionality: fully functional, pressing force: 106 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,700 mm, table height: 650 mm, total length: 1,965 mm, total width: 2,645 mm, total height: 3,992 mm, overall weight: 12,500 kg, Equipment: documentation/manual, Hydraulic 4-column stamping press – 106 T – 1,700 × 1,200 mm For sale is a hydraulic 4-column stamping press from the manufacturer ALN with a maximum pressing force of 106 T. The machine has a table size of 1,700 × 1,200 mm, an open height of 1,450 mm, and a stroke of 1,000 mm, making it suitable for stamping, forming, straightening, inserting, and assembly work in industrial applications. ##### Technical data + information: Hydraulic 4-column stamping press – 106 T – 1,700 × 1,200 mm ==== General information - Reference ID: TPT-09 - Manufacturer: ALN - Type: Hydraulic 4-column stamping press - Model: 4 SPY 60 SO - Machine number: 845 - Year of construction: 1998 - Pressing force: 106 T - Table size (usable area): 1,700 × 1,200 mm - Table height: 650 mm - Open height: 1,450 mm - Stroke: 1,000 mm - Overall height: 3,992 mm - Overall width: 2,645 mm - Overall depth: 1,965 mm - Total weight: 12.5 T - Basement required: no ==== Hydraulic cylinder - Max. working pressure: 243 bar - Return speed downwards: 250 mm/s - Return speed upwards: 280 mm/s - Initial pressing speed: 17.5 mm/s ==== Hydraulics & drive - Main motor: 25 kW - Oil tank: 650 l Bsdpfxe Ad H S Ao Abuodi ==== Safety and equipment - Slug damping: yes - Maintenance platform: no ==== Documentation - Hydraulic diagram - Electrical diagram - Operating manual ##### Application areas: Stamping, forming, straightening, inserting, assembly work, toolmaking, mold making, metalworking, mechanical engineering, contract manufacturing, series production (Hydraulic 4-column stamping press, 4-column stamping press, hydraulic press, ALN press, 4 SPY 60 SO, 106 T press, 106-ton press, forming press, stamping press, straightening press, inserting press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength lies in the design and manufacture of custom machines and press automation. We distribute tailor-made hydraulic presses at surprisingly competitive prices. For the hydraulics of the presses, we mainly use components from leading European manufacturers.

Condition: excellent (used), Year of construction: 1960, functionality: fully functional, machine/vehicle number: V-65R, cutting force: 100 t, total width: 1,400 mm, total length: 6,000 mm, total height: 2,100 mm, overall weight: 8,300 kg, pressure: 30 bar, Arnold baling press SP-100 In very good condition. Regularly maintained and in continuous operation until today. Bdedoz Az Exepfx Abuji

Condition: good (used), functionality: fully functional, Year of construction: 2006, stroke length: 200 mm, overall weight: 11,600 kg, total length: 4,500 mm, total width: 2,000 mm, total height: 2,850 mm, input voltage: 400 V, pressing force: 170 t, clearance between the columns: 2,700 mm, distance table to ram: 350 mm, table length: 3,100 mm, type of input current: three-phase, Equipment: documentation/manual, safety light barrier, Amada HFP 170/3 CNC press brake | 2006 | AMNC-PC | Wila clamping system Bdsdpfxjz S Nuqj Abuji Machine specifications Manufacturer: Amada Model: HFP 170/3 Year of manufacture: 2006 Condition: used, in good working order Control system: Amada AMNC-PC Tool clamping system: Wila Included: 1 set of tools Dimensions: approximately 4,500 × 2,000 × 2,850 mm Machine weight: approximately 11,500 kg Location: Waanrode, Belgium Description Amada HFP 170/3 CNC press brake from 2006, equipped with AMNC-PC control and a Wila tool clamping system. The machine is used but still in good working order. One set of tools is included with the sale. The machine is being sold due to the purchase of a larger press brake. Transportation can be arranged upon consultation. The machine is stored in Liège but can be inspected while powered on.

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake nozzle: 250 mm Bjdpocdr E Asfx Abusdi Rated motor power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum flow rate: 4,900 m³/h Nominal flow rate: 3,534 m³/h Negative pressure: 2,451 Pa Filter area: 22.4 m² Dimensions (L x W x H) in mm: 2,305 x 1,333 x 2,609 Briquetting capacity: 30 - 50 kg/h Location: Available at warehouse 54634 Bitburg Subject to prior sale.

Condition: new, Year of construction: 2026, Weima Briquetting Press TH 714 The TH 714 machines are designed for operations with required throughput capacities of up to 150 kg/h. The robust press housing enables the production of high-strength briquettes from materials such as wood, polystyrene, foams, light metals, paper, or biomass. Numerous additional options are possible, e.g., oil cooling for use in continuous operation. All machines are available in left-hand or right-hand versions. Mounting on a stable base frame ensures quick installation and enables mobile use. User-friendly operation thanks to Siemens PLC control To fulfill our promise of performance, we design and manufacture all control cabinets ourselves at our Ilsfeld location and equip them with well-known international components. This guarantees the highest quality in a compact design. The Siemens PLC control used is perfectly tailored to the requirements of the briquetting process. Foreign object-resistant conveying screw thanks to cardan suspension Bdsdpeil Hggjfx Abuoi The conveying screw, which transports the material into the pre-compactor of the briquetting press, is suspended on a cardan joint. This prevents foreign objects from causing damage to the conveying screw. As is often the case, however, the specific application determines which suspension is chosen. For metal applications, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil volume (liters): 250 Weight (approx. kg): 1100 Location: In stock at 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2026, The VPR-4000 vacuum membrane press is a universal press for woodworking and thermoforming. The VPR-4000 press is also swiveling and mobile. Possible applications: Veneering / Form gluing / Encasing... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of curved and laminated components Vacuum system: Work surface with vacuum channels for uniform negative pressure, even with large workpieces. Becker vacuum pump / Oil-free / Tank capacity 100 l Work surface: 4000x1500mm Pump power: 0.75 kW Vacuum pump capacity: 40 m3/h Rubber membrane External dimensions: 4100 x 1650 x 1000 mm Bdsdoyr R Hwopfx Abuji Weight: 400 kg Location: In stock at warehouse 54634 Bitburg - free loading -

Condition: used, Technical details: punching cross section in mm²: 45 kp/mm² Bjdpeu Icw Hofx Abuodi table-size: 120x100 mm throat: 80 mm weight of the machine ca.: 15 kg space requirements of the machine approx.: 0,3x0,2x0,95 m Punching Press *

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets * Bdsdsu Icxqopfx Abuoi