Used Biesse Rover 321 R for sale (317)

Condition: used, machine/vehicle number: 007848, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Duodpfx Apewkrqpewet Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008383, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Dujdjx Swcgopfx Apwst Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008113, Max. panel width: 3800 mm Max. panel length: 3200 mm Main saw blade projection: 75 mm Dujdpfx Aow Iddhopwjt No of Grippers: 8

Condition: used, Year of construction: 2015, functionality: fully functional, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machines for gluing and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, laminate, sliced veneer, etc.) • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness 10-60 mm Workpiece thickness with MFU aggregate (depending on profile) 10-35/60 mm Edge height 14-64 mm Edge thickness – roll material 0.4-3 mm Edge thickness – strip material (*) 0.4-10 (12) mm Workpiece overhang 25 mm Minimum panel length 140 mm Minimum width (at 140 mm length) 85 mm Minimum width (at 250 mm length) 50 mm Feed speed 12 m/min Dust extraction* 8x connection Ø100 mm Compressed air connection 7 bar Glue pot capacity 2 (approx.) kg * Depending on selected aggregates. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge to the workpiece, automatically cuts it from the roll, and presses it onto the workpiece, guaranteeing perfect positioning. - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs with 0° to 15° angle. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made of synthetic material up to a thickness of max. 3 mm. JOINTING CUTTER UNIT RT02 Joins the workpiece before glue application. Equipped with two 1.8 kW high-frequency motors at 12,000 rpm. SCRAPER UNIT RB02 For post-processing thick PVC/ABS edges. FLAT SCRAPER RC02 Aggregate for removing excess glue in the edge-to-panel area. Equipped with tracing rollers and a flat knife with engagement control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using fabric polishing discs. The unit automatically adapts to the workpiece thickness. ANTI-ADHESIVE SPRAY UNIT ADZ02 Precision application of anti-adhesive using injectors activated by numerical control. Dusdpfx Apexzb Iijwot KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing through: - controlled pressure of the glue roller - automatic disengagement in case of feed stop - automatic ON/OFF of the glue unit • REVERSE system to switch the glue roller for co- or counter-rotation Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue with machines equipped for EVA gluing. NC Axis for Fine Trimming Unit Kit for the automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system. Pair of multiprofile cutters for the fine trimming unit: 25-degree bevel, radius 2 mm + radius 1 mm plus straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of the tracer to match the edge thickness. Adjustment takes place via the control system. Function for processing only on the corners. NC Axis for Scraper Unit Kit for automatic adjustment of tracing rollers and tools to match edge type and thickness. Adjustment takes place via the control system.

Condition: used, Year of construction: 2009, Used BIESSE ARTECH edge bander, model Akron 430 A T Technical data: - Minimum/maximum panel length: 140-3200 mm - Minimum/maximum panel width: 85-3200 mm - Minimum/maximum panel thickness: 10-60 mm - Minimum/maximum edge thickness (rolls): 0.4-3 mm - Minimum/maximum edge thickness (strips): 0.4-8 mm - Minimum/maximum edge height: 14-64 mm - Working height: 900 mm - Panel protrusion from feed track: 25 mm - Feed track speed: 12 m/min - Dust extraction air speed: 30 m/sec - Supply air pressure: 7-10 bar SINTRA LT control Entry guide with mechanical viewer -Trimming unit: 2 motors, 1.8 kW each, with pad followers Vertical adjustment for tool position -Gluing unit: glue pot capacity 2 kg 3 air-operated pressure rollers Digital edge thickness viewer -Shear unit with 2 push pressure positions depending on edge thickness Dodpfxeyt Nvgj Apweut -Automatic strip edge loader -End trimming unit: 2 motors, 0.50 kW each, with pad followers, 2 selectable cutting angles (0°-15°) automatically adjustable from control panel (to increase edge overhang or trim for best finishing) -Multifunction corner rounding unit with 4 selectable positions from control panel Possible operations: straight, bevel, radius1, radius2 For each finishing position, +/- edge overhang can be selected -Edge scraper unit -Glue scraper unit Program creation for different finishing options Machine length: 3880 mm Weight: 1530 kg

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Features: - Aggregate control via touch-screen - Joint milling unit - Glue pot Duedpfx Aex Enquepwot - End trimming unit - Radius milling unit - Radius scraper unit - Flat scraper unit - Buffing unit - Spraying unit (front and rear) Location: Rhineland-Palatinate Availability: By arrangement Sale on behalf of customer. Details provided without guarantee.

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Motorized Roller table "RBO" with 90° conveyoring belts B) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) C) Connection system, with up-side-down turning machine (180°) "RBO" Mod. Ribaltatore D) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units (1 left+1 right) with 4x BH18 heads with 18 spindles each (36 right + 36 left) total 72 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) E) "BIESSE" RD dowels insertion machine No.2 horizontal units (1 right+1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles F) Brush-cleaning machine "WANDRES" Dsdpfxeyhqa Ao Apwjut

Condition: used, Year of construction: 1997, - edge banding unit - Cross-cutting unit Dodpfx Apod Inktoweut - Milling unit - Fine trimming unit - scraper - buffing unit

Condition: good (used), BIESSE ARROW ATS 5 AXIS NC1000 MACHINING CENTER Machining head with revolver tool change BH39 drilling machine, 250m3 vacuum pump (this machine had been in operation for 10 years in a woodworking school) Duedeukcy Espfx Apwot

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Edgebander BIESSE Akron 1440A Dodpfx Apeyh A I Aewjut Availability: April/May 2026 CE certificate Year of manufacture: 2017 Possibility to inspect the machine before purchase

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, KuKa robot with Biesse RBO handling equipment . Made by Biesse - RBO - Table for referanse point indication - 4 meter long beam with carrige for the movement in X direction , parallell to the machine x axis - Schmaltz vacuum system - Separte el cabinet for the robot and other el cabinet for the RBO handling. This robot cell was connected to the Biesse Rover machine until 10.11.2025 , for the handling of panels to end from the machine. All robot function are 100% operative. Dujdpfxjxy Afts Apwjt Sales from the factory close down. Please take a look at incl. video Rekman Maskin & Service - service of cnc machines since 1986

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: 55595, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 60 mm, overall weight: 3,000 kg, controller model: Xp 600, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Working Area Y-axis: 1,000 mm Working Area Z-axis: 60 mm MACHINE DETAILS Control: Xp 600 with Biesse Works Software Weight: 3,000 kg Dodpfx Asydk Rmopwout EQUIPMENT Automatic loading system with motorized belt conveyor 2 clamps for securing and transporting the panel 1+1 vertical electrospindle (lower + upper) with 3 axes 1+1 independent saw (lower + upper) 29 + 29 independent spindles for vertical drilling in X and Y direction (upper + lower) 10 + 10 independent spindles for horizontal drilling in X and Y direction (upper + lower) Automatic unloading system with motorized belt conveyor

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 77503, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 25 m/min, overall weight: 6,510 kg, controller manufacturer: SINTRA, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Max. feed speed: 25 m/min Dsdjydidrspfx Apwjut MACHINE DETAILS Control: Sintra Weight: 6,510 kg EQUIPMENT - Sanding unit - Coil holder magazine with 2 positions and automatic edge change via CNC - Adhesive unit for EVA hot-melt glue with preheating device and glue pot - Preparation for adhesive unit for PUR glue - Pressure group for straight profiles with electronically adjustable pressure rollers via CNC - End trimming unit with 2 motors and automatic tilt adjustment - Filler unit with 2 vertically aligned motors - Edge smoothing unit with 2 swivelling motors - Multifunctional 4-motor corner rounding unit (smoother + corner rounder) with numerical control in automatic adaptation - Anti-stick unit - Adjustable edge scraper unit - Glue-saving unit - Oscillating brush unit - Electronically adjustable working height - Motorized rubber belt with increased pressure - Motorized and electronically adjustable panel guide - Side roller conveyor with idler rollers for panel support

Condition: excellent (used), Flexible N.C. automatic line for drilling, routing and inserting (hardware). Numerical control with Albatros software. Consisting of: KZ2046) Infeeder with hedgehog (buffer) store (18 positions) KZ2047) Transfer with motorised conveyoring belt KZ2048) CNC Mod. Vector GLR-X 30-13 KZ2049) Transfer with motorised conveyoring belt KZ2050) CNC Mod. Vektor XK 40-13 KZ2051) Transfer with motorised conveyoring belt Dedpfxeidmkro Apwsut KZ2052) CNC Mod. Idrak 3 KZ2053) Transfer with motorised carpet with 90° inclination on a rollers table KZ2054) Rollers conveyor with also motorised belts (to move panels at 180° to the assembly lines)

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beams No. 2 Horizontal top supporting beams (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Horizontal metal arms with vacuum cups, adjustables OPTIONAL No. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader No. 1 Motorized rollers table (which receives panels from the Loader) Separate electric and command panel Electronic Programmer Perimetral safety metal grids Total installed motor power Kw 17,7 Working capacity (cycles/min) 16-20 (ca.) Min/Max panels thickness mm 10-50 (ca.) Duodpjflc T Sjfx Apwst Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3000 (ca.)

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°). Dimensions mm 7168 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Dedpfx Asd Rg Dzspwsut Total installed motor power Kw 20.8

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Dodsd Rg Dpjpfx Apwout Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 Dedpjcggy Ssfx Apwsut - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 4 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) - No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 3 top pressing devices - No. 2 endless screws to evacuate the wastes. With CNC NC 500 to control, manage and run the 2 machines of this line VZ0250C) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) Duedpfx Apod Nviqewot - No. 2 Top pressing devices - No. 2 endless screws to evacuate the wastes. VZ0250D) BRUSHING-CLEANING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter)

Condition: excellent (used), Through-feed Drilling ELECTRONIC LINE (3 machines), CNC controlled, J06031) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 ea) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top pressing devices + No. 2 endless screws to evacuate the wastes. J06032) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 Top pressing devices + No. 2 endless screws to evacuate the wastes. J06033) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 4 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 4 Top pressing devices + No. 2 endless screws to evacuate the wastes. With CNC (software Tooling System + Woodmaster) The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units Dsdpfjg Urn Eex Apwout The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 Dodpfx Aped Tyvxeweut - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 11

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) - Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Dedpou Tg Uqsfx Apwsut Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Guide Z-axe) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (Kw 0,3 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 30 (Kw 0,65 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0,3 x 2) max 25 m/min - ROTAX motors with automatic tool change (8+8 position store) Profile Scraping unit (Multi-profile, by N.C.) RB 30 Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2) With ‘hopper’ for panels (useful height mm 80), as a buffer, to speed up the work cycle

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts the unique panel): - Minimum length of the workpiece: mm 500 - Maximum length of the workpiece: mm 2700 - Minimum width of the workpiece: mm 300 ca. - Maximum width of the workpiece: mm 700 - Thickness (min./max) of the workpiece: mm 10 / 30 ca. - Max feeding speed: m/min 50 - Total installed power Kw 43.2 Along with the following groups: POS. 1 Milling unit for execution of bottom slots/grooves (Kw 7,4) max. blade diameter mm 300 POS. 2 Lower scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 3 Upper scoring blade unit (Kw 7.4) max. blade diameter mm 350 POS. 4 Lower main blade (sawing) unit (Kw 7.4) max. diameter mm 350 Dodpfxou Tqb Ue Apwsut

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO Duedpfxsh T Dvts Apwst N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), DOUBLE-SIDE SIZING & EDGE BANDING MACHINE - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 270 - 1200 Numerical Control /Software SINITRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) Duodpfxst N Ix Re Apwot Safety and sound-proof enclosures/cabins Working line (work units support tables), manual adjustment SIZING PART (for each side): No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5.8 x 2) Free space for Milling unit FS Milling unit (vertical join trimming) ES30 + ER30 (Kw 5 x 2) 0° - 90° Softforming Milling unit SF 10 (2 x Kw 2,4) 0° - 45° Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Lamps to heat the workpieces side (infrared heater) RP 10 Band Pressure zone (N.C. adjustment) Pressing rollers (revolver) both for straight and shaped edges (softforming) Soft PF40 (4 positions) mm 800 (Cesoia CI10+CS10+RL10) + Edge coils supporting unit (No. of reels) 6 Rough Milling unit RS 10 (Kw 1,3 x 2) Fine Milling unit Softforming RF 10 / SF (Kw 0,65 x 2) Fine Milling unit (Multi-profile) RF 30 (Kw 0,65 x 2) Milling grooving Unit FB 30 (Kw 4,5 x 2) 0 - 90° Profile edge scraping unit (Multi-profile) RB 30 Glue scraping unit RC 05 / Soft Spraying Unit (for polishing liquid) + Buffing unit SZ 30 (Kw 0,37 x 2)