Used Brandt Ktd 720 for sale (100)

Year of construction: 2006, Condition: good (used), - Glue pot - Conversion: carried out by the company Hüttenhölscher in Verl - Application: glue application line for handle strips - Vacuum table: included - Automatic pressure zone: included Iislhcdoibdyqsw Eeb

Condition: excellent (used), Year of construction: 2001, For edgebanding of irregular shaped parts. Ijlhcdwjwga Uhj Eeib

Condition: excellent (used), Bargains from company liquidation Switzerland Brandt KTD 68 CF joint milling machine Ijlhcev T Tyrsdw Eeib

Condition: used, machine/vehicle number: 006723, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Premilling Unit: yes Iislheq A I Aaecdw Esb Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, Feed Speed 8-14 m/min Total Length 5,273mm Workpiece Thickness: 8-60mm Edge Material Coil 0.4 – 3mm Edge Strip Material 0.4 – 8mm Pre-milling Unit 2 X 2.2Kw Gluing Unit A8 Workpiece Pre-Heating Quick melt Hot Melt Application Unit EVA Pre-Melt Unit Pressure Zone with Motor Driven Adjustment End Trim Unit Chamfer / Straight 2X0.18Kw with pneumatic adjustment Trimming Unit anti-rotation Pneumatic 2-point adjustment Multi-Functional Contour Trimming Unit Profile Scraping Unit with quick change heads with pneumatic adjustment Glue Joint Scraping Unit Buffing Unit Power Control PC 20 Homag Group Quality Kit PU-Rollers Interface for Ligmatech ZHR 01 Iiolhcdwswixnfe Eeb Return System Not Included

Condition: used, Type: OPTIMAT F 13 Year of construction: 2001 Condition: function-tested, very good, second-hand - Workpiece thickness 16 to 55 mm - Workpiece width min. 30 mm - Inner radius min. 35 mm - Edge thickness max. 3 mm - 2 milling motors 0.4 kW - Suction connection 80 mm Iielsud U Iyshcdw Ejb

Condition: used, Year of construction: 2006, Used machine with rapid heating tank Iolewkbd Eohcdw Ejib with contact heating shoe with trimming burr and 2 trimming motors with flush trimming unit and 2 trimming motors with straight/radius insert combination Digital counters enable fast and defined, i.e., repeatable adjustments Two-point pneumatic adjustment of the upper and lower trimming motors Scraper unit for finishing with horizontal/vertical tracing Workpiece thickness 8-50 mm Edge thickness 0.4-3 mm Feed speed 11 m/min. Connected load 4 kW Compressed air connection 6 bar Weight 750 kg Machine length 3150 mm Availability: Short-term Storage location: North Rhine-Westphalia

Condition: ready for operation (used), Functionality: fully functional, workpiece height (max.): 200 mm, Postforming Machine Brandt Type PF 10 Maximum workpiece thickness: approx. 200 mm Min. workpiece thickness: approx. 16 mm Workpiece length: 1800 - 4200 mm Iielhcdswkqtcjw Esb Pressure rail Total power consumption: 12 kW

Condition: used, Year of construction: 2004, Edgeband thickness max: 3 mm Ielswk D T Nehcdw Ejib Panel thickness max: 50 mm Thickness of coiled edgeband max: 3 mm Feedrate max: 9 m/min Glue system granulate: glue pot below feeding chain Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Scraper unit: Profile scraper Buffing unit: Yes Type: right-side machine Machine length: 3.450 mm Conformity marking: CE mark

Condition: used, machine/vehicle number: 006458, Type of edging: Thin edge, Thick edge, Veneer Iijlhcdsnzrt Ajw Ejb Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Maximum panel thickness: 50 mm

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, edge thickness (max.): 8 mm, Easy Controller EC10+ Edge Thickness: 0.4-8mm Workpiece Thickness: 8-60mm Total Machine Length: 4780mm Infeed Fence Adjustable Joint Trimming Unit with 42mm cutter heads End Trim Chamfer / Straight with pneumatic adjustment Trimming Unit Contour Trimming Unit Ielhcdwowixkys Ejib Scraping Unit with pneumatic adjustment Buffing Unit

Condition: used, Year of construction: 2013, Price: On request What are Presale Items at Second Owner? Iielhcdwswc Ecco Ejb Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Nordson unit needs repair - Year: 2013 - Documentation available: No - CE mark available: Yes - Serial number: Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, Year of construction: 1996, Used machine Year of construction: 1996 Equipment and technical data: Spreading unit consisting of: -roll and fixed length magazine -roll separator -glue applicator -pressure zone Heating system: Glue basin Iijlhcdwowkbame Eeb Cross-cut unit Jointing unit Universal trimming unit Scraper unit Buffing unit Buffing unit Workpiece thickness: 10-55 mm Workpiece length: min. 160 mm Workpiece width: min. 65 mm Edge thickness: 0.4 - 12 mm Roller cutting: 3 x 45 mm Feed rate: 13 m /min. Pneumatics: 7 bar Availability: Short term Storage location : Flörsheim

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Iolhcdoq Ehpaow Ejib Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg Ieloc Tmygshcdw Eoib glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: like new (used), Year of construction: 2016, operating hours: 650 h, Functionality: fully functional, feed rate X-axis: 11 m/min, workpiece height (max.): 60 mm, compressed air connection: 7 bar, EDGE BANDER BRANDT (HOMAG) HIGHFLEX 1220 FULL OPTION PERFECT CONDITION ONLY 650 H PREFILLER L+R ROTATING 2 GLUE TRAYS (WHITE/TRANSPARENT) VARIOUS SCRAPERS Dutch manual Iiolhowcma Njcdw Ejb Immediately available (demo is ready)

Condition: excellent (used), Year of construction: 2014, Feed Speed: 8-18m/min Feed Speed with Corner Rounding: 14m/min WorkPiece Thickness: 8-60mm Edge Material Coil: 0.4-3mm Edge Material strips: 0.4-12mm Extension of Infeed fence 300mm PU Rollers Joint Trimming 2x2.2Kw Ijlhswglduscdw Eoib Workpiece Pre-Heating Airtec Unit Quickmelt Application Unit End Trim Chamfer / Straight with pneumatic adjustment Multi Trimming MS 40 Unit (2 profiles) with multiple roller sensing Multifunctional Contour Trimming Profile Scraping MZ 40 (2 profiles) with multiple roller sensing Glue Joint Scraper Buffing Unit Separating agent Spray Device Lubricant Spray Unit Detergent Spraying Unit Automatic Edge Infeed Device Power Touch Control System Homag TFU140

Condition: ready for operation (used), Year of construction: 2008, Additional Equipment Adjustable Infeed Fence Application of Separating Agent to Workpiece Pneumatic Adjustment of End Trimming Unit (Bevel/Straight) Pneumatic Adjustment of Scraper Blade Pneumatic Adjustment of Milling Unit Automation Package II for Dual-Router Machines Iijlowctyvjhcdw Esb Pneumatic 2-Point Adjustment for End Trimming Additional Equipment Adjustable Infeed Fence Application of Separating Agent to Workpiece Pneumatic Adjustment of End Trimming Unit (Bevel/Straight) Pneumatic Adjustment of Scraper Blade Pneumatic Adjustment of Milling Unit Automation Package II for Dual-Router Machines Pneumatic 2-Point Adjustment for End Trimming This BRANDT KDF 680 edgebander was manufactured in 2008. It is a robust and reliable machine, ideal for efficient edge banding applications. Consider the opportunity to buy this BRANDT KDF 680 edgebander. Contact us for more information. Application Types Edge Banding

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, pre-milling unit Ijlowivvmshcdw Eeib glue station for granulate pneumatic pre-cutting guillotine pressure zone with three rollers cutting unit with two balls milling unit with profile cutters profile scraper flat scraper year of production 2010 machine length 3.7 m

Condition: ready for operation (used), Year of construction: 2007, Edgebander Brandt: Brandt Type: KDF660 Serie nr: 0-261-08-0484 Year: 2007 Return system Brandt: Ligmatech Type: ZHR 01/R/065 Serie no: 0-305-10-1299 Year: 2007 Edgebander equipped with:Pre-routers, cutting units, fine trimmers, radious trimmers, rounding units, scrapers, buffing, release agent, return system Technical info edgebander: Edging thickness: 0.4 - 12 mm Scissors: max. 3 x 45 mm resp. 0,8 x 65 mm Workpiece thickness: 8 - 60 mm Feed speed: approx. 16 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Electrical connection: Power 400 volt, 50 Hz, 3 phase 18.4kw, 35AMP Compressed air connection: 6 bar Connection power: approx. 15 kW Machine length: 6 360 mm Technical info return system: Machine length: 6 355 mm Working side: Right Working height: 810 to 950 mm +/- 30 mm Iielhcdovwkrgsw Ejb Stock no: 2002414BXM

Condition: ready for operation (used), Year of construction: 2009, operating hours: 4,185 h, Edge thickness: 0.4 - 12 mm Max. workpiece thickness: 8 - 60 mm Feed rate: 8 - 18 m/min, continuously variable Weight: approx. 2.5 t Total length: 6,260 mm Pre-melter: Yes Joining unit: Yes Cross-cut saw unit: Yes Radius, flush trimming unit: Yes Corner rounding unit: Yes Radius scraper: Yes Islswhnguehcdw Ejib Surface scraper: Yes Buffing: Yes

Condition: used, machine/vehicle number: 006719, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Iiolhcdwjq Awlis Eeb Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Ielhcdwsvvkd Ts Eeib

Condition: ready for operation (used), Year of construction: 2013, Tools Max tool length 5760 mm Additional Equipment Islhswgqa Ujcdw Eeib Joining Unit: 2 x 2.2 kW 200 Hz Gluing Unit: A12 Snipping Unit: Chamfer/Straight 2 x 0.35 kW Pneumatic Adjustment for Bevel/Straight Cross-Cuts Pneumatic 2-Point Adjustment for Cross-Cuts Pre-Milling Unit: 2 x 0.55 kW O degrees Pneumatic 2-Point Adjustment Multifunctional Shaping Unit: 2 x O, 4 kW Profile Scraper with Quick-Change Heads Pneumatic Adjustment Scraper Blade This BRANDT KDF 650 Highflex 1650 edgebander was manufactured in 2013. Ideal for precise edgebanding applications, it ensures reliable performance for woodworking professionals. Consider the opportunity to buy this BRANDT KDF 650 Highflex 1650 edgebander. Contact us for more information. Application Types CNC Wood Machining

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Ijlhcjvvkfwedw Eoib Storage location: Nattheim