Used Brandt Optimat Ktd 720 for sale (102)

Condition: used, Year of construction: 2010, Edge banding machine Manufacturer: Brandt Pgedpfxezuzlbe Aazjt Type: Optimat KTD 720 Year of manufacture: 2010 Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Suitable for curved shaped edges Pgjdozc Hxqepfx Aazet Good condition, possible to test !

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-04-6588 si 0-284-96-1130, functionality: fully functional, power: 21 kW (28.55 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: electric, actuation type: electric, total height: 1,600 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, year of last overhaul: 2025, Equipment: documentation/manual, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Maxim speed:18m/min General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Loc A U Uov Szt Dslccsai Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Groups existent on the machine 1)Emulsion spray at the inlet and outlet Edge preheating 2)Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment 3)Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min 4)Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide Podpfx Aasz E A T Eszsgt 5)Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment 6)Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movem 7)Cleaning and polishing unit 8)Automatic return conveyor- Homag TFU 140

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine BRANDT Optimat KDF 440 C, year 2015: Pgjdjwun Irspfx Aazet Configuration: Entry fence servomotorical adjustable Premilling manual adjustable Edge banding EVA glue / Airtec System Schugoma Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers pneumatic adjustable Polishing brushes Cleaning fluid spraying front and back. Control panel Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 11m/min. Total length including feeding plate 5573mm Total weight 1860kg Only 592.198 Meters edgebanded. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: excellent (used), Year of construction: 2010, I sell the fully equipped edge banding machine BRANDT Optimat KDF 220 C, year 2010: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Glue scrapers Control panel Working thickness adjustment manual driven Material height 8-50mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 4150mm Total weight 1600kg Very good condition, fully working! Including full documentation and CE. Available immediately. Podjzn Avzepfx Aazjgt

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used BRANDT KD 68 CF Optimat edge banding machine from 2001. The machine is equipped with several processing units for complete edge processing. Among other things, it features pre-milling units, trimming units, radius milling cutters, corner copying devices, and pull knives for radius and surface finishing. Technical data / Equipment Manufacturer: BRANDT Type: KD 68 CF Optimat Year of manufacture: 2001 Machine no.: 0-261-02-8154 Control system: BRANDT NC 9 Feed speed: approx. 11 m/min Edge thickness: up to approx. 40 mm Voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Equipment: BRANDT NC 9 control system Pre-milling Trimming units Radius milling Corner copying Pull knives for radius processing Surface pull knife Psdpfszxy Nyox Aazegt pneumatically controlled units Roller magazine / edge feeder Workpiece transport via feed chain Dust extraction connections on the processing units Central control via control panel Emergency stop The machine is currently still at the customer's site but would be immediately available! Transport is possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: ready for operation (used), Year of construction: 1996, machine/vehicle number: 0-261-03-6806, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: pneumatic, total height: 1,610 mm, total length: 4,000 mm, total width: 1,680 mm, overall weight: 1,000 kg, Equipment: documentation/manual, The Brandt edge banding machine has provided excellent service for 30 years in a small business and is now to be passed on to new owners. Pedpfx Aez Db N Njazsgt

Condition: ready for operation (used), Year of construction: 2008, Brandt Optimat KDF 420 Edge Banding Machine Powercontrol PC 20 control system Edging thickness: 0.4–8 mm Edging height: 8–60 mm Joint trimming with DIA cutter End trimming Pgjdpfsx Dzw Nex Aazot Flush and radius trimming Radius scraper blade Flat scraper blade Buffing unit Machine length: 4360 mm Operating manual and tools included Year of manufacture: 2008 Price: 15,000.-

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT Optimat KDF 550 C, year 2006: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Control panel Power Control PC20+ Working thickness adjustment servomotorical Pgodpeq A N Nujfx Aazet Material height 8 - 50mm Edge thickness 0,4 - 8,0 mm Feeding speed 11 m/min. Total length including feeding plate 5860mm Total weight 2660 kg Very good condition, fully working!

Condition: excellent (used), Year of construction: 2014, I sell the fully equipped edge banding machine BRANDT Optimat KDF 220 C, year 2014: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment servo driven Material height 8-50mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 4150mm Total weight 1320kg Pgjdpfx Aou N T Ewsazot Plus one additional glue tank included. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: ready for operation (used), Year of construction: 2005, total height: 2,300 mm, overall weight: 2,600 kg, product length (max.): 6,060 mm, This BRANDT OPTIMAT KDF 670 edgebander was manufactured in 2005. It features a comprehensive range of processing units including pre-milling, glue application, edge feeding and cutting, and polishing. Capable of handling workpiece thicknesses from 8 to 60 mm and edge bands up to 15 mm. Feed speed reaches up to 20 m/min, optimizing productivity. Consider the opportunity to buy this BRANDT OPTIMAT KDF 670 edgebander. Contact us for more information about this machine. • Processing units / aggregates: • Pre-milling unit • Glue application unit • Edge feeding and cutting (roll/strip) • Pressure zone • End trimming unit • Top and bottom trimming unit (pre-milling + profiling) • Corner rounding unit • Scraper unit (profile scraper) • Glue joint scraper • Cleaning (solvent or spray system) • Polishing unit • Working capacity: • Workpiece thickness: 8–60 mm • Edge band thickness (rolls): 0.4–3 mm • Edge band thickness (strips): up to 12–15 mm • Feed speed: 8–18 m/min (up to 20 m/min depending on configuration) • Minimum workpiece width: • 70 mm (workpiece thickness 8–22 mm) • 120 mm (workpiece thickness 23–40 mm) • 150 mm (workpiece thickness 41–60 mm) Pgsdpfx Aezug E Tjazot • Maximum edge roll diameter: 830 mm • Electrical & power: • Total installed power: approx. 21 kW • Voltage: 400 V, 3-phase, 50 Hz

Condition: used, BRANDT Optimat KDF340 Edge Bander Pre-milling cutters Adhesive application by roller Pneumatic pre-cut guillotine Pressure rollers End-cutting saws Top-bottom milling unit R1-R2 Profile scraper Polishing unit Max. workpiece height: 45 mm Max. edge thickness from roll: 3 mm Feed speed: 10 m/min Pedpfx Ajy Dc Uljazegt Machine length: 350 cm Machine inspected, ready for operation

Condition: good (used), Code: 0134 Brand: BRANDT - GERMANY Model: KTD 53 Automatic edge bander for wood, pvc, veneer, furniture, custom furniture, joinery and various Pgodpfx Aswq Sc Ssazet Technical data: Min/max panel height mm 10/40 Edge thickness min/max 0,4 - 1,5 mm Feed speed 7 mt/min on motorized roller conveyor Min panel width mm 65 Composition: Gluing unit Cutting shear unit End cutting unit Upper/lower trimming unit Wheels on base for easy handling Volt 380/50 Total power Kw 4,5 Compressed air 6 bar Overall dimensions mm 1800 x 615 x 1170 h Weight kg 280

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Pgsdsvvkd Topfx Aazet Storage location: Nattheim

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Pedpfx Aajq Ehpaozsgt Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Edge banding machine KTD51 for profile strips and straight edges, with direct glue application. Minimum workpiece length: 160 mm, workpiece thickness: 10 – 40 mm, edge thickness: 0.5 – 1 mm, minimum internal radius approx. 25 mm. Year of manufacture: 1993, feed speed adjustable 4 – 9 m/min, 2.6 kW, 400 Volt. Pgodpfxevf H I Tj Aazot Transport available at additional cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, finishing unit, buffing unit -Manufacturer: Homag, 2 milling units and 2 buffing units from BRANDT KS 25 edgebanding machine -buffing units: motor KMER 0.18 kW 1360 rpm -Polishing roller: Ø 145 mm, height and depth adjustable / swiveling Psdpfx Aaox Hyzhozegt -Milling units: Motor Perske / Homag, see photos of nameplates -Voltage: 220 V / 200 Hz -Price/Fee: complete -Overall dimensions: 1200/800/H590 mm Total weight: 175 kg

Condition: good (used), Brandt edgebander (Homag group) for roll and ABS edge banding. Complete with pre-milling units at entry and all profiling groups with corner rounding units. In perfect working condition. Pgedpfxjy N Ukij Aazot

Condition: used, Year of construction: 2000, machine/vehicle number: 0-260-06-0228, Foot-operated 1200 x 800 mm 80 mm dust extraction port pneumatic connection Cable + plug, 16 A 1 set of operating tools Pjdpfx Asigadloazegt 1 set of feeler rollers

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trimming knives. A good entry-level machine with extensive equipment. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed rate: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection 1x100 mm, 4x80 mm, including the shown ducting to 200 mm Easy-Touch control with color screen for easy operation of the machine 10 programs can be saved Units: Top pressure, manual adjustment with crank and SIKO counter Infeed guide, manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened A total of 2 interchangeable glue tanks for quick color change from white to transparent Gluing section with automatic edge feeding for roll material up to 3 mm Pressure zone with 3 rollers Miter saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering, and rounding Corner rounding cutter R2 with diamond cutter, 1 motor-driven Radius trimming knife R2, manually adjustable Podpfx Aajzn Afpszogt Glue joint trimming knife with large roller, pneumatically controlled Hood locking CE mark Operating manual as a folder All indexable inserts of the milling units and the trimming knives have been renewed or re-sharpened, saws sharpened, and diamond joining cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the shaping milling unit has not been renewed, but is still sharp. Original paint, only a few spots retouched. Dust extraction hoses renewed. Approx. 1200 operating hours, i.e. only 1/2 hour per day. Machine dimensions: approx. 4300 (with table) x 1250 x 1600 mm (L x W x H) Weight: approx. 950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: good (used), Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine -Manufacturer: Brandt, components from the BRANDT KM 36 edgebanding machine -Individual components: see photos Pedpfx Aaegylrdezsgt -Price/Sale: complete -Overall dimensions: 1200/800/H530 mm -Total weight: 122 kg

Condition: excellent (used), Year of construction: 2013, Brandt Highflex KDF 220 edge banding machine with joining, corner copying, and two trimming blades. Highly automated. A video of the machine in operation can be sent upon request. Edge thickness range approx. 0.4 - 3mm, solid edge up to 6mm Workpiece height approx. 10 - 60mm Feed speed approx. 10m/min Noise protection hood Extendable workpiece support Dust extraction connection 1x120mm, 1x100mm, 3x80mm Easy-Touch control panel EC+ for easy machine operation 4 programs can be stored. Machine in Highflex version, highly automated, switching from thin edge to thick edge via programs Units: Extended infeed zone Chain track central lubrication, pneumatic manual Glue pot quick-change device, currently one glue pot available Pgedpfxjzzqwmo Aazjt Top pressure manual adjustment, PU rollers Infeed guide manual adjustment with SIKO counter for chip removal Joining milling cutter with diamond milling cutters, sharpened Contact heating shoe for preheating the panel Gluing section with automatic edge feed for roll material up to 3mm, switchable for co-rotating and counter-rotating operation Pressure zone with 3 rollers, pneumatic adjustment between thin and thick edge Cut-off saw with 2 motors, straight cuts or bevel cuts (program adjustment) Combination milling unit, pneumatically controlled for flush trimming, chamfer and radius Corner rounding milling cutter R2 with diamond milling cutter with integrated sensing ring Radius trimming blade R2, pneumatically retractable with quick-change device Glue joint trimming blade with large roller, pneumatically controlled Hood locking CE marking All indexable inserts of the milling units and the trimming blades have been renewed or re-sharpened, saws sharpened, diamond joining milling cutters sharpened. The machine is therefore ready for immediate use. Only the diamond milling cutter of the profile milling unit has not been renewed, but it is still sharp. Original paint, only a few spots have been touched up. Unfortunately, the machine does not have an operating hour counter, but it still looks very good visually. Very good condition, see original photos. Machine dimensions approx. 4550 x 1250 x 1550mm (LxWxH) Weight approx. 1400kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: excellent (used), functionality: fully functional, Selling an original Homag Group glue application unit (upper part with glue application roller and drive coupling) for edge banding machines of the Brandt / Homag brand. The unit is in good, clean condition with normal signs of wear and tear (see article photos). It features the practical quick-change system, including the corresponding locking pins (ball handles) and the original Harting connector. Technical data & details: Manufacturer: Homag Group / Brandt Part number (engraved): 4-030-15-0531 (4030150531) Components: Knurled glue roller, metering slide for layer thickness adjustment, protective grille, high-temperature-resistant connecting cable with Harting connector, 2x locking pins. Pgsdpfxey Uv Ums Aazst Suitable for: Many models of the Brandt Optimat series (KDN / KDF / Ambition, etc. – please check the part number with your machine beforehand).

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 0-261-20-6827, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Type KDF 220 Profiline Year of manufacture: 2012 Units controlled from display Jointing unit: 2 x 2.2 kW Gluing unit A6 End trimming saw unit: 2 x 0.18 kW Flush milling unit: 2 x 0.27 kW Profile milling unit: 2 x 0.35 kW WD 40 Radius scraper Surface scraper Edge thickness: 0.4 - 6 mm Pgodpfx Asyy S Adeazet Workpiece thickness: 8-60 mm Feed speed: 11 m/min Total power: 16 kW Length: 4150 mm

Condition: used, Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine -Manufacturer: Brandt, aggregate from edge banding machine BRANDT KS 25 -Engine. Groschopp 0.25 kW / 2800 rpm -Gearbox: i 12/233 rpm -Dimension total. 560/340/265 mm Pgedpfx Aajgylrpozst -Weight: 28 kg