Used Brandt Kdf 340 for sale (98)

Condition: used, Year of construction: 2014, power: 22 kW (29.91 HP), edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, TECHNICAL DETAILS Feed speed: max. 18 m/min Panel height: min. 10 mm Panel height: max. 60 mm Panel width: min. 70 mm Edge thickness: min. 0.4 mm Gkedpfx As Aihdlokhsd Edge thickness: max. 12 mm Number of processing units: 9 Pre-milling unit Number of units: 1 Motor power: 2.2 kW Edge magazine and gluing Number of magazine positions: 1 Number of pressure rollers: 4 Edge processing units Number of edge processing units: 7 Cutting unit Number of motors: 2 Motor power per motor: 0.35 kW Flush trimming and rounding unit Number of motors: 2 Motor power per motor: 0.55 kW Corner rounding unit Number of motors: 2 Motor power per motor: 0.35 kW Grooving unit Number of motors: 1 Motor power: 3.5 kW Buffing unit Number of motors: 2 Motor power per motor: 0.18 kW MACHINE DETAILS Total connected power: 22 kW EQUIPMENT Processing of thin edges Processing of thick edges Processing of solid wood edges EVA hot melt adhesive system AIRTEK hot air system Overpressure with idle rollers Panel support guides Pre-milling unit with automatic, time-controlled operation Edge roller magazine EVA glue reservoir EVA pre-melter Set of pressure rollers with 4 pressure rollers NC positioning of pressure rollers Cutting unit Flush trimming and rounding unit with NC positioning Corner rounding unit WD60 Grooving unit Edge pulling unit with NC positioning Glue pulling unit Buffing unit Spray unit Machine programming software PowerControl PC20 CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 7517

Condition: used, Year of construction: 2006, edge thickness (max.): 3 mm, feed rate X-axis: 11 m/min, rotational speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Panel thickness: max. 50 mm Edge thickness: min. 0.4 mm Edge thickness: max. 3.0 mm Feed rate: max. 11 m/min Number of panel processing/milling units: 1 unit Number of edge processing units: 5 units Pre-milling unit Motor power: 2.2 kW Speed: 1,600 rpm Cut-off saw unit Motor power: 0.18 kW Speed: 12,000 rpm Rough milling unit, top and bottom Motor power: 0.27 kW Speed: 12,000 rpm Gsdps Aihdasfx Akhjkd Edge rounding unit Number of motors: 1 unit Motor power: 0.35 kW Speed: 12,000 rpm Edge pulling unit Polishing unit Number of motors: 2 units Motor power: 0.10 kW Speed: 2,700 rpm MACHINE DETAILS Control system: PC 16 EQUIPMENT Pressure roller with idler rollers Edge roller magazine Glue pot for EVA hot-melt adhesive CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8555

Condition: excellent (used), BRANDT KDF 340 edge banding machine - used Godpfx Ajz Ea Dzskhokd Manual, self-clamping pressure bridge adjustment, Feed via transport chain, Workpiece support is retractable, Diamond jointing cutter for both forward and reverse rotation, Glue reservoir located underneath, Standby function, Miter saw with 2 HF motors, Miter saw is swiveling, Edge trimming/radius chamfering unit, Milling tools with carbide insert blades, Radius pulling blade, Chip collection box for radius pulling blade, Air nozzle on the radius pulling blade ----- Technical data ----- Edge thickness, roll material: 0.4-3 mm, Edge thickness, strip material: 0.4-3 mm, Workpiece thickness: 50 mm, Min. workpiece length: 250 mm, Feed speed: 9 m/min., Distance workpiece support: 400 mm, Support plate Ø for edge material: 810 mm, Dimensions jointing cutter: 100x62x30 mm, Dimensions miter saw blade: 100x2.6x32 mm, Cutting blade for roll material up to: 3 mm, Warm-up time: 17 min., Power jointing cutter: 2x2.2 kW, Power miter saw: 2x0.18 kW, Power milling station: 2x0.27 kW, Power chamfering unit: 2x0.09 kW, Dust extraction nozzle Ø jointing cutter unit: 120 mm, Dust extraction nozzle Ø milling unit: 100 mm, Dust extraction nozzle Ø pulling blade unit: 100 mm, Compressed air connection: 6 bar, Overall length: 3,550 mm, Dimensions (L x W x H): 3,550 x 1,250 x 1,450 mm Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, BRANDT Optimat KDF340 Edge Bander Pre-milling cutters Adhesive application by roller Pneumatic pre-cut guillotine Gsdpfxsy Dc Uls Akhjkd Pressure rollers End-cutting saws Top-bottom milling unit R1-R2 Profile scraper Polishing unit Max. workpiece height: 45 mm Max. edge thickness from roll: 3 mm Feed speed: 10 m/min Machine length: 350 cm Machine inspected, ready for operation

Condition: excellent (used), Year of construction: 2013, Brandt Highflex KDF 220 edge banding machine with joining, corner copying, and two trimming blades. Highly automated. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm, solid edge up to 6 mm Workpiece height: approx. 10 - 60 mm Feed speed: approx. 10 m/min Noise protection hood Extendable workpiece support Dust extraction connection: 1x120mm, 1x100mm, 3x80mm Easy-Touch control panel EC+ for easy operation of the machine 4 programs can be saved. Machine in Highflex design, highly automated, switching from thin edge to thick edge via programs Units: Extended infeed zone Chain track central lubrication, pneumatically manual Glue pot quick-change device, one glue pot currently installed Top pressure, manual adjustment, PU rollers Infeed guide, manual adjustment with SIKO counter for chip removal Jointing cutter with dia cutters, sharpened Contact heating shoe for preheating the board Gluing section with automatic edge feed for roll material up to 3 mm, switchable for forward and reverse operation Pressure zone with 3 rollers, pneumatic adjustment between thin and thick edge Cutting saw with 2 motors, straight cut or bevel cut (program adjustment) Combination milling unit, pneumatically controlled for flush trimming, chamfering, and rounding Corner rounding cutter R2 with dia cutter with integrated sensing ring Radius trimming blade R2, pneumatically retractable with quick-change device Joint trimming blade with large roller, pneumatically controlled Hood locking mechanism Gkjdpezzqwmefx Akhed CE marking All indexable inserts of the milling units and trimming blades have been renewed or re-sharpened. Saws sharpened, dia jointing cutters sharpened. The machine is therefore ready for immediate use. Only the dia cutter of the profiling cutter has not been renewed, but is still sharp. Original paint, only a few spots have been touched up. The machine unfortunately does not have an operating hour counter, but it still looks very good. Very good condition, see original photos Machine dimensions approx. 4550 x 1250 x 1550mm (LxWxH) Weight approx. 1400 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, Year of construction: 2007, functionality: fully functional, operating hours: 10,570 h, power: 15 kW (20.39 HP), type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, total length: 5,860 mm, overall weight: 2,700 kg, Equipment: CE marking, documentation/manual, Industrial BRANDT KDF 550C edgebander for sale, designed for the production of cabinet furniture. A reliable, industrial-grade model featuring a pressure belt; suitable for both: small workshops and larger-scale production. Features and Equipment: Automatic edge feeding Gluing unit (for EVA glue) Front and rear end-trimming saws Top and bottom milling units Gjdpoz Smxuefx Akhekd Corner rounding (two units – for faster processing) Scrapers Buffing/polishing unit Edge thickness: ~0.4–3 mm Panel thickness: up to ~50 mm Sprayers. Condition: Used, fully functional machine. Currently still in operation at a furniture workshop and available for inspection. Regularly maintained by UAB Lintera. We are the second owners—a small company. The machine has not been used for third-party contract work; it has been used exclusively for our own furniture production, operating on a single-shift basis. Price not includes VAT.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Specification: Feed Speed 814m/min Workpiece Thickness: 8-60mm Edge Material Coil: 0.4-3mm Edge Material Strip: 0.4-8mm Joint Trimming 2x2.2kw Workpiece Pre heating EVA Gluepot Airtec Unit AT15 Edge Magazine Pneumatically Driven pressure Roller Gkjdpfxj Afxulj Akhsd End Trim Unit Chamfer/Straight Top & Bottom Trimming Unit with Pneumatic Adjustment Contour Trimming Unit Profile Scraping Unit with Quick Change Heads Glue Joint Scrapers Buffers CE

Condition: used, Year of construction: 2012, functionality: fully functional, premilling unit endtrimmer multiprofilunit Ziehklinge Buffing up to 8 mm edge nc on infeed fence and pressure unit Gkode Airyaopfx Akhed NC on multiprofil unit

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: 0-261-07-1735, functionality: fully functional, operating hours: 4,600 h, input voltage: 400 V, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, feed rate X-axis: 14 m/min, total height: 2,100 mm, total length: 6,900 mm, total width: 1,200 mm, overall weight: 3,500 kg, Equipment: documentation/manual, Name: BRANDT KDF 670 Highflex – edge banding machine Manufacturer: BRANDT Type: KDF 670 Highflex Year of manufacture: 2005 Machine available from: 2026-11-20 Machine condition: good Location: Kielce, Poland Technical data: Edge thickness: 0.4 - 12 mm Workpiece thickness: 8 - 60 mm Feed rate: 14 m/min Pre-milling unit: 2 x 2.2 KW Gluing unit: Quickmelt Edge magazine: for 1 roll Trimming unit: 2 x 0.35 KW Rough milling unit: 2 x 0.55 KW Profile milling unit: 2 x 0.55 KW Gksdpfs Adzmzjx Akhed Corner milling unit (copying): 2 x 0.35 KW Flat scraper (glue scraper): yes Radius scraper (profile scraper): yes Polisher: yes Control: PC16 Total power approx.: 15 KW Overall dimensions approx. (L x W x H): 6900 x 1150 x 2050 mm Weight approx.: 3500 kg Features: Software-controlled adjustment of the infeed fence Extension of the infeed fence by 300 mm Motorized adjustment of the upper pressure roller height Software-controlled adjustment of the pressure zone Automatic edge feeding Anti-adhesive spray Pneumatic adjustment for trimming at an angle/straight Pneumatic adjustment of the milling unit Software-controlled adjustment for edge thickness The machine has operated for very few hours – approximately 4600 (the computer disk was replaced after 2600 operating hours)

Condition: excellent (used), BRANDT KDF 440 edger, well-equipped, CNC-controlled units operated from the control panel Liquids Pre-routing cutters Plate heating Glue application by roller Exchangeable tank Pneumatic preliminary guillotine Pressure rollers Trimming knives for final trimming Multi-routing unit, top and bottom, R1-R2 Corner rounding unit, R1-R2, pneumatically switchable Multi-profile edger, R1-R2 Flat edger Gods Af Uzaspfx Akhskd Liquids Polisher Max. part height 60 mm Max. veneer thickness in roll 3 mm Feed rate max. 14 m/min with corner rounding 8 m/min Very good condition for a used machine Original mileage 400,000 meters

Condition: excellent (used), BRANDT KDF 440, 1440 edger well-equipped, CNC-controlled units operated from the control panel Pre-milling cutters Plate heating Glue application with a roller Second tank included Pneumatic pre-trimming guillotine Pressure rollers Trimming balls for final cut Liquids Multi-milling unit (up/down) R1-R2 Corner rounding unit R1-R2 Multi-profile edging unit R1-R2 Straight edging unit Liquids Polishing unit Nesting package Max. element height 60 mm Max. veneer thickness in roll 3 mm Feed rate max. 14 m/min with corner rounding 11 m/min Gksdpfx Aezuztfskhod Very good condition for a used machine Original mileage 144,000 meters

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This BRANDT OPTIMAT KDF 350 C has a total of 1,119.21 operating hours. If you are looking to get high-quality edgebanding capabilities, consider the BRANDT OPTIMAT KDF 350 C machine we have for sale. Contact us for further details. Gsdpfx Ake Ai Txzjhskd - Control Software Version: V.2.43- Total Operating Hours (Gesamt Stunden): 1119.21 h- Current/Reset Operating Hours (Stunden): 1.43 h- Total Workpieces Processed (gesamt Werkstücke): 94,963 pcs (Stck)- Current/Reset Workpieces Processed (Werkstücke): 1,181 pcs (Stck)- Voltage: 400 V- Control Voltage: 24 V- Frequency: 50 Hz- Phase: 3~+N / 3~- Fuse Rating: 25 A

Condition: excellent (used), Year of construction: 2017, I sell the fully equipped edge banding machine BRANDT KDF 230 AirTec, year 2017: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible / AirTec unit Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 5070mm Very good condition, fully working! Including full documentation and CE. Available immediately. Gkedpfxjythxme Akhjd

Condition: used, Year of construction: 2016, Edge banding machine with workpiece return Manufacturer: Brandt Type: KDF660 Gsdpfxs Ahqtks Akhskd Year of manufacture: 2016 Technical specifications: - Joint milling unit - Gluing unit - Pressure zone - Cutting unit - Flush trimming unit - Fine trimming unit - Corner trimming unit - Profile trimming blade - Flat trimming blade - Buffing unit - Workpiece return Note: The technical specifications and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 2016, functionality: fully functional, operating hours: 5,300 h, power: 5 kW (6.80 HP), input voltage: 24 V, input current: 5 A, input frequency: 50 Hz, type of input current: DC, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 4,100 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 8 m/min, actuation type: mechanical, total height: 1,800 mm, total length: 4,200 mm, total width: 800 mm, overall weight: 1,800 kg, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, BRANDT KDF 210 edge banding machines in good condition for sale. Servicing and repairs have been carried out by certified specialists. Additionally, a glue application unit for different glue colors can be purchased. Gsdey Aibvjpfx Akhokd

Condition: ready for operation (used), Year of construction: 2008, Brandt Optimat KDF 420 Edge Banding Machine Gkjdpfx Asx Dzw Nekhod Powercontrol PC 20 control system Edging thickness: 0.4–8 mm Edging height: 8–60 mm Joint trimming with DIA cutter End trimming Flush and radius trimming Radius scraper blade Flat scraper blade Buffing unit Machine length: 4360 mm Operating manual and tools included Year of manufacture: 2008 Price: 15,000.-

Condition: used, Year of construction: 2004, power: 16.2 kW (22.03 HP), input voltage: 400 V, input frequency: 50 Hz, total height: 2,100 mm, total length: 7,400 mm, total width: 1,100 mm, overall weight: 3,200 kg, Equipment: CE marking, No. 04568 Edge banding machine Brandt KDF 680 Used, year of construction 2004 Workpiece thickness 8 - 60 mm Edgebanding thickness 0.4 - 12 mm Control system Brandt Power Control PC 16 Connected load of the basic machine 16.2 kW Power supply 400 V / 50 Hz / 3-phase Pre-milling unit Gluing unit Quickmelt End trimming unit with program-controlled switching between straight and bevel trimming Combination trimming unit for flush, bevel and radius trimming Corner rounding unit Profile scraping unit Flat scraping unit Buffing unit for polishing the edges Release agent spraying system Additional equipment: Hot air system Schugoma HDL3020 Retrofitted hot air system, year of construction 2015 Power 6 kW Separate control unit Hot air activation of the functional layer of compatible zero-joint edgebanding (laser edgebanding) to create a visually seamless joint Transport dimensions approx. 7400 x 1100 x 2100 mm LWH Weight approx. 3200 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price Gkjdpfjz Rgpcox Akhjd To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 2016, Power Touch control (touch screen system) with 21" full HD video Panel height 60 mm Pvc/Abs 3 mm Solid wood up to 12 mm Feed speed up to 20 m/min Working height electronically adjustable by N.C. Panel support guide with idle routines Side roller conveyor with idle wheels for panel support Anti-adhesive group Two-motor rectifier group Roll holder plate EVA glue gluing group with pre-melting unit and glue pot Edge pressure group on straight profiles with pressure rollers automatically adjustable by numerical control End trimming group with automatic inclination adjustment Two-motor chamfering group with adjustment 2-motor multifunction rounding group (chamfering + rounding) Edge scraping group with electronic adjustment by numerical control Glue scraping group Brush group Anti-adhesive group Gksdpfx Aswwtpyskhjd

Condition: used, Year of construction: 2008, POWER CONTROL PC 20+ Panel height (mm) 60 PVC-ABS edge thickness (mm) 3 Solid wood edge thickness (mm) 12 Feed speed 20 m/min Manual infeed guide Pre-trimming unit EVA glue application and pre-melting unit Edge holder plate End trimming unit Two-motor overlapping trimming unit Two-motor staggered chamfering unit with NC adjustments Two-motor rounding unit Edge scraper unit Glue scraper unit Brush unit Godpfx Asw Db Rfekhjkd

Condition: good (used), Year of construction: 2007, functionality: fully functional, For sale: an edge banding machine of the brand Brandt KDF 660. Gjdpfjyhqa Nox Akhskd

Condition: excellent (used), Year of construction: 2010, I sell the fully equipped edge banding machine BRANDT Ambition KDF 650 C, year 2010: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Control panel Power Control PC20 Working thickness adjustment servomotorical Material height 8 - 60mm Edge thickness 0,4 - 12,0 mm Feeding speed 11/14 m/min. Total length including feeding plate 5860mm Total weight 2600 kg Gedpfx Aksu E E D Djhskd With full Documentation and CE. Very good condition, fully working!

Condition: used, Year of construction: 2011, Gluing, edge banding, capping, combination milling, corner copying, pull blade. Power consumption: 10 kW. Gkedozx Tlnspfx Akhod Dust extraction: 1x 120 / 3x 60 / 1x 100 mm. Feed rate: 10 m/min. Workpiece thickness: 8 - 50 mm. Edge thickness: 0.4 - 3.0 mm. Roller separation: max. 0.4 - 3.0 mm x 45 mm. Working height: 950 mm. Dimensions: 4280 x 1300 x 2180 mm. Weight: approx. 1400 kg. Storage location: Nattheim.

Condition: used, Year of construction: 2007, Workpiece thickness: 8 – 50 mm Gsdpfxo Agli Ns Akhskd Edge thickness: 0.4 – 3 mm (max. 3 x 30 / 1.0 x 55) Fixed lengths: max. 3 x 45 mm Feed rate: 11 m/min. Connected load: 10.5 kW Compressed air: 6 bar Weight: approx. 1250 kg Machine length: 3920 mm Storage location: Nattheim

Condition: used, machine/vehicle number: 006723, Type of edging: Thin edge, Thick edge, Veneer Gluing System: EVA Hotmelt Gkedpfx Aksq A I Aaehsd Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: used, Year of construction: 2006, Modell: Brandt O KDF 530 C Production year: 2006 Installed power: 11,4kW. Feed speed: 11m/min Workpiece thickness: 8-40mm. Edge thickness: 0,4-6mm. Premilling unit: Yes Gluing unit: Yes, EVA End trimming unit: Yes Fine trimming unit: Yes Corner rounding unit: Yes Glue srapper: Yes Buffing unit: Yes Gkedpfx Akezkfu Sshsd