Used Brandt Optimat Kd 56 for sale (90)

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Iodpovvkd Tofx Adisa Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 2001, Edgebander BRANDT OPTIMAT KD 68 CF - year of production 2001 - DTR TECHNICAL SPECIFICATIONS: machine tool adapted to the processing of PVC / ABS edges veneer up to 3 mm thick and wooden sticks up to 9 mm thick pre-cutter - plate milling tape pressure glue tank, hot melt glue granules, additional glue application roller heated strip of tape guillotine - pre-cutting of the veneer 3 pressure rollers 2 ready-to-cut ball crushing units 2 milling aggregates for edge shaping (radial milling cutters) an aggregate for making corners (milling) sanding units - for removing excess glue polishing aggregates max. workpiece thickness 50 mm min. workpiece width 60 mm min. element length 160 mm feed speed 96 m / min total power 10.8 kW diameter of the extraction port 120 mm dimensions (length / width / height) 5700/1200/2100 mm weight 2000 kg Ijdpfx Adehcitreisa

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 with gluing unit for hot-melt adhesive granules Glue reservoir located below the glue roller Glue application to the workpiece via glue roller in both co-rotating and counter-rotating modes automatic edge magazine for coil material and fixed lengths Pressure zone with pneumatically-driven main pressure roller and special post-pressure rollers to compact the upper and lower glue joint Centrally adjustable upper pressure Central manual chain conveyor lubrication Control panel at machine infeed End trimming unit (saw aggregates) for front and rear edge overhang with high-precision linear guides Iodoxya Rtspfx Adisa 2 motors, each 0.18 kW Swivel range for straight and bevel cutting 0–15 degrees Flush-milling unit, top and bottom, with vertical and horizontal tracing Swivel range 0–15 degrees with 2 milling motors, each with replaceable insert cutter combinations (straight/radius) Digital counters enable rapid and precise, i.e., repeatable, settings Two-point pneumatic adjustment for upper and lower milling motors Scraper unit for finishing processing with horizontal/vertical tracing Support table extendable up to 350 mm Integrated section control for contactless operation of processing functions. Settings via keyboard and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3,150 mm Availability: short term Location: Flörsheim

Condition: excellent (used), Year of construction: 2012, Brand KDF110 Optimat Ambition - only 1150 hours Brand: Brandt Model: KDF 110 Year of manufacture: 2012 M-Nr.: 0-261-20-6960 Control system: Easy Control 10+ contactless line control, feed-regulated with start-stop optical-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: Iodpfx Adsxvirfjioa Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers / product guidance: Central control, 2 roller tracks Jointing milling unit: 2 x 0.75 kW, 200 Hz including jointing cutter set in DIA version with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing station for hotmelt glue with option for PU application, magazine, pressure zone with electro-pneumatic 2-point positioning via central control unit Pressure zone: First roller driven and 2 free-running rollers for excellent and consistent compression End trimming unit: 0.18 kW, 12,000 rpm Profile milling unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counterrotation, 3-position adjustment chamfer/radius (R2), overhang and straight, max. 3 mm edge thickness with Siko counter Profile scraper: Max. 3 mm edge thickness Surface scraper: Reversible blade Chain width: 80 mm Edge material in rolls: 0.4 – 3 mm End trimming device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Minimum workpiece width: • For workpiece thickness 8–22 mm: 70 mm • For workpiece thickness 23–40 mm: 120 mm (Depending on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed speed: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Overall length: 3,672 mm Location: ex stock 54634 Bitburg - Immediately available -

Condition: good (used), Year of construction: 2007, functionality: fully functional, Edgebander Kuper Optimat KDF 660 – used, ready for demonstration The used edgebander Kuper Optimat KDF 660 is in good condition and is currently under power, allowing for an on-site demonstration. Details: Model: Kuper Optimat KDF 660 Condition: used, functional The machine is connected and can be tested Service: Removal and loading of the machine can be organized upon request. Iodpfxjxu Iafj Adisa If interested or to arrange a viewing, please feel free to contact us!

Condition: used, Year of construction: 2008, functionality: fully functional, Type: Edgebander - single sided Manufacturer: BRANDT Model: Optimat KDF 550 C Year: 2008 Location: Lithuania Terms: as-is where-is Board thickness 60 mm Iedpjxwwb Rofx Adisa Edge thickness 8 mm Feed advance 11 m/min Length x width x height 5860.0 × 1560.0 × 230.0 Weight 2600 kg Feed speed: 11 m/min Workpiece thickness: 8 – 60 mm / edge thickness: 0.4 – 8 mm / working height: 950 mm Electricity supply: 400 v – 3 phase – 50 hz / pneumatic pressure: 6 bar / noise emission level: 80…87 db(a) Extraction diameter: 1 × 120 mm / 2 × 100 mm / roll separation: max. 3. 0 × 45 mm / 0. 8 × 65 mm

Condition: used, machine/vehicle number: 007517, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Iodpfx Adowuz E Reija Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0-261-07-2126, edge thickness (max.): 8 mm, working height: 950 mm, workpiece width (max.): 60 mm, workpiece length (max.): 4,760 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Machine type: KDN 530 C Machine length: 4,760 mm Connected load: 6 kW Weight: 1,900 kg Suction diameter: 2 x 100 mm Working range Feed speed: 11 m/min (optional: 14 m/min) Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roll cutting: max. 3.0 x 45 / 0.8 x 65 mm Working height: 950 mm MACHINE DETAILS Machine dimensions (W x H): 1,560 x 2,300 mm Voltage: 400 V, 3 Ph, 50 Hz Ijdpeu Tur Rofx Adisa Pneumatic operating pressure: 6 bar Noise emission value: 80-87 dB(A)

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Equipment and technical specifications: - With glue application unit for hot melt adhesive granulate - Suitable for processing PU adhesive granulate in compliance with adhesive processing regulations - Glue reservoir located beneath the glue roller - Glue application to the workpiece via glue roller in both co- and counter-rotation - With contact heating shoe for preheating the workpiece - Automatic edge magazine for rolls and fixed lengths - Pressure zone with pneumatically driven main pressure roller and special follow-up pressure rollers to compact the top and bottom glue joints - Centrally adjustable top pressure - Central manual chain lubrication - Control panel at machine infeed - End trimming aggregate: - For trimming front and rear edge overhang; high-precision linear guide - 2 motors, each 0.18 kW - Tilt range for straight and angled cuts: 0–15 degrees - Flush milling aggregate: - Top and bottom with vertical and horizontal sensing - Swivel range 0–15 degrees with 2 milling motors using interchangeable straight/radius cutter combinations - Digital counters enable fast and defined, i.e. repeatable, adjustments - Two-point pneumatic adjustment of top and bottom milling motors - Scraper unit for finishing, with horizontal/vertical sensing - Extendable workpiece support up to 350 mm - Integrated section control for contactless operation of processing functions. Adjustable via keypad and LED display - Workpiece thickness: 8–50 mm - Edge thickness: 0.4–3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW Iedpfx Aowkbd Ejdiea - Compressed air connection: 6 bar Machine length: 3,150 mm Weight: approx. 750 kg Availability: short-term Location: Röllbach

Condition: ready for operation (used), Year of construction: 2011, This BRANDT Optimat KDF 650 C edgebander was manufactured in 2011. It features a machine length of 5760 mm, working height of 950 mm, and can handle workpiece thicknesses from 8 to 60 mm and edge material thicknesses from 0.4 to 12 mm. Variable feed speed ranges from 8 to 18 m/min. Weight is 2600 kg. Consider the opportunity to buy this BRANDT Optimat KDF 650 C edgebander. Contact us for further details regarding this machine. Application Types Iodpjw Uakqjfx Adiea Edge Banding

Condition: ready for operation (used), Year of construction: 2008, This BRANDT Optimat KDF 550 was manufactured in 2008. It features a machine length of 5860 mm, power requirement of 11.5 kW, and a weight of 2600 kg. Capable of handling workpiece thickness from 8 to 60 mm and edge thickness from 0.4 to 8 mm, it's ideal for precise edgebanding tasks. Consider the opportunity to buy this BRANDT Optimat KDF 550 edgebander. Contact us for more information. Isdpewug Uwsfx Adija Application Types Edge Banding

Year of construction: 2004, condition: not inspected (used), Brandt Optimat Edgeband trimmer with edge trim Bought by us as a used machine for a product line that didn't launch. Was functioning when decommissioned, we barely used it. Ijdpfx Asxguhgsdija

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: C-261-04-2523, feed rate X-axis: 9,000 m/min, saw blade diameter: 100 mm, rotational speed (max.): 12,000 rpm, Submitting a bid obliges you to collect the item by the deadline of 14.10.2025! TECHNICAL DETAILS Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, lip cuts, coil material Feed speed: 9 m/min Edge material thickness: 0.4–3.0 mm Lip thickness: 0.4–3.0 mm Edge material height: 55 mm Coil diameter: 800 mm Rotation speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction port Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Edge material: Coil material Max. tape cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Edge Glue Applicator Rotation speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Workpiece thickness: 45 mm Max. edge material height: 3 mm Edge material angle: 0–15° Edge material cross-section: 135 mm² Flush Trim Unit Rotation speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Max. edge thickness: 3 mm Straight tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination tools r = 3 mm: 2 × Trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Fuse protection: 16 A Control voltage: 24 V Ijdpoxhgk Aofx Adiea

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Ijdpfxovvkfwj Adisa Storage location: Nattheim

Condition: excellent (used), Year of construction: 2014, I sell the fully equipped edge banding machine BRANDT Optimat KDF 220 C, year 2014: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment servo driven Material height 8-50mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 4150mm Total weight 1320kg Ijdpfx Aou N T Ewodisa Plus one additional glue tank included. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: excellent (used), Gluing unit Cross-cut saw Two straight cutters Two rounding cutters Iedpfxexdy Sle Adisa

Condition: used, Type: OPTIMAT F 13 Year of construction: 2001 Condition: function-tested, very good, second-hand - Workpiece thickness 16 to 55 mm - Workpiece width min. 30 mm - Inner radius min. 35 mm - Edge thickness max. 3 mm - 2 milling motors 0.4 kW - Suction connection 80 mm Ijdpfxsud U Iyo Adioa

Condition: used, Year of construction: 2000, machine/vehicle number: 0-260-06-0228, Foot control 1200 x 800 mm Iedoigadljpfx Adiea suction nozzle 80 mm pneumatic connection cable + plug 16 A 1 set of operating tools 1 set of sensing rollers

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Isdpfoq Ehpaex Adija Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: Iodpfx Adoc Tmygoioa • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine BRANDT Optimat KDF 440 C, year 2015: Configuration: Entry fence servomotorical adjustable Premilling manual adjustable Edge banding EVA glue / Airtec System Schugoma Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers pneumatic adjustable Polishing brushes Cleaning fluid spraying front and back. Control panel Working thickness adjustment servo driven Material height 8-60mm Isdpfx Adewun Irjisa Edge thickness 0,4-8mm Feeding speed 11m/min. Total length including feeding plate 5573mm Total weight 1860kg Only 592.198 Meters edgebanded. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: excellent (used), Gluing machine Guillotine Ijdpfx Asttu Risdiea cross-cut saws milling cutter Scraper Polishing machine

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, rotational speed (max.): 10,960 rpm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum panel thickness: 50 mm Minimum panel height: 8 mm Maximum panel height: 50 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of positions: 1 Unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time: yes Motor power: 0.18 kW Speed: 10,800 rpm Ijdpfx Adexw Tugoioa Unit 2 Unit: Edge milling Number of motors: 2 Automatic engagement by time: yes Motor power: 0.27 kW Speed: 10,960 rpm Unit 3 Unit: Edge scraper Control system: BFS MACHINE DETAILS Installed total power: 4 kW EQUIPMENT Upper pressure Pressure by spring-loaded rollers Panel support guide Magazine for the coil EVA glue system Hot-melt glue pot Edge pressure roller track Number of pressure rollers: 3 CE marking

Condition: used, Year of construction: 2010, operating hours: 3,084 h, total length: 5,500 mm, total height: 1,650 mm, total width: 850 mm, - Machine available from: 2025-11-26 - Details: - └ Description: Includes rolling tables, does not include fencing. - Year: 2010 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: Ijdpfxjxyx U Re Adioa - Operating hours: 3084 - Number of units [pcs]: 9 - └ 1st unit type: Milling unit - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - └ 4th unit type: Pre-milling unit - └ 5th unit type: Milling unit - └ 6th unit type: Radius scraping unit - └ 7th unit type: Grooving unit - └ 8th unit type: Preheating unit - - Tools available: No - └ 9th unit type: Brushing unit - Min. edge band thickness [mm]: 0.4 - Max. edge band thickness [mm]: 8 - Min. panel thickness [mm]: 8 - Max. panel thickness [mm]: 60 - Min. feed speed [m/min]: 8 - Max. feed speed [m/min]: 14 - Options: Return transport - Voltage [V]: 230 - Current consumption [A]: 23 - Fuse [A]: 25 - Transport dimensions: 5500mm x 850mm x 1650mm (l x w x h) - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, feed rate X-axis: 11 m/min, workpiece height (max.): 40 mm, edge thickness (max.): 6 mm, rotational speed (max.): 12,000 rpm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 11 m/min Maximum panel thickness: 40 mm Min. panel height: 8 mm Max. panel height: 40 mm Min. edge thickness: 0.3 mm Max. edge thickness: 6 mm Maximum spindle speed: 12,000 rpm MACHINE DETAILS Trimming unit Unit: Format cutting Unit: Trimming Automatic engagement by time Motor power: 2.2 kW Edge heating lamps Coil magazine Number of positions: 1 Gluing system Hot melt glue pot Edge pressure roller conveyor Number of pressure rollers: 3 Edge processing unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time Motor power: 0.18 kW Maximum speed: 12,000 rpm Edge processing unit 2 Unit: Top/bottom trimming Number of motors: 2 Motor power: 0.27 kW Maximum speed: 12,000 rpm Edge processing unit 3 Unit: Multifunction Number of motors: 1 Motor power: 0.35 kW Maximum speed: 12,000 rpm Edge processing unit 4 Unit: Scraper Edge processing unit 5 Unit: Buffing Number of motors: 2 Motor power: 0.1 kW Ijdpfoxw Ttvex Adisa Total installed power: 13 kW EQUIPMENT Control system: PC 16 CE marking