Used Chamber Furnace for sale (2,710)

Condition: excellent (used), Manufacturer / Type: Nabertherm L 08/14 with programmable C19 controller Configuration: horizontal Rated temperature: up to 1400 °C (continuous operation permissible temperature likely lower) Chamber volume: 8 liters Description: • Usable dimensions (W×H×D): approx. 15 × 15 × 30 cm • External dimensions (W×H×D): approx. 61 × 140 × 71 cm • Weight: approx. 100 kg • Maximum power consumption: 3.3 kW • Plug: 380 V CEE (three-phase, 16 A) Bedpjxr S Rpofx Aacjlp Scope of delivery: Furnace only, no additional accessories – see original photos Condition: Used, in good technical and visual condition. The heating rod holder on the right side is slightly damaged, but the unit is fully operational. Shipping: Freight forwarding or personal pickup Additional information: • Fast heat-up times (in test: approx. 30 minutes to 1000 °C) • Labotherm, Tmax 1400 °C • High-quality Al₂O₃ fiber insulation for rapid heating • Special heating wire on ceramic oxide support tubes allows free heat radiation (→ long service life) • Heating from both sides • Low external casing temperature • Integrated control system with electronic safety interlock • Programmable control via C19 controller

Year of construction: 2023, condition: as good as new (ex-display), 2 units new in stock, new machine warranty, in-stock item, available for immediate delivery Equipped with a safety system for solvent-based substances in accordance with DIN 1539. Matching loading carts available in stock (see photo). Contact us for details! Blsdpfol Dw T Aex Aacsp - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 260°C - Controller: P570 / 50 programs, each with 40 freely programmable segments - NtLog for controller: data recording via USB stick - Air circulation: 3600 m³/h - Exhaust volume: min. 390 m³/h - Additional equipment: drive-in rails - Connected load: 39 kW - Net weight: 1,150 kg - Incl. documentation, CE declaration We are happy to offer installation and commissioning services. Viewing by appointment in our warehouse. We offer new and used industrial furnaces. Contact us! Furnace, ovens, drying oven, kiln, heating oven, warming cabinet, industrial furnace, annealing oven, preheating oven, tempering oven, drying cabinet, chamber kiln, curing oven, forced convection drying cabinet, forced convection oven, solvent oven, chamber dryer

Condition: excellent (used), 2-chamber aluminium silo standing on foot ring (plastic granulate silo) - second-hand - Content approx. 70.000 Ltr. diameter approx. 3.000 mm cyl. height approx. 9.250 mm Total height approx. 14,850 mm Container with upper conical bottom and lower cone on top shelf per chamber: 1 dome DN 600 Bjdpfx Aaef D Hygscelp 1 vent connection DN 100 1 flanged socket DN 80 the lower conical bottom ends in 2 square outlet nozzles approx. DN 250 otherwise according to photos The silo is equipped with brackets for a double ladder with back protection, which can be purchased as well, price on request.

Condition: good (used), Maximum temperature: 750°C Usable chamber volume: 55 l Usable chamber dimensions: 350 x 500 x 350 mm (height) Heat-up time to nominal temperature: 105 min Electrical connection: 380 V, 5.4 kW Weight: 160 kg Bljdpfjxb A I Rsx Aacsp Required space: 950 x 790 x 700 mm

Condition: used, Vötsch Model: VC 0018 Bedow Swrtspfx Aacslp Air-cooled climate test chamber Test chamber dimensions: Width 580 x Depth 450 x Height 750 mm Housing dimensions: Width 865 x Depth 1150 x Height 1780 mm Test chamber volume: approx. 190 liters Performance data for temperature tests: Temperature range: -10 °C to +90 °C Temperature deviation in steady-state, according to IEC 60068-3-5, dependent on test chamber temperature time-wise ±0.1 to ±0.5 K spatially ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 0.6 K/min. Cooling: 0.3 K/min. Heat compensation in the range +20 °C to +50 °C: 200 W Calibration values: +4 °C and +90 °C Performance data for climatic tests: Temperature range: +10 °C to +90 °C Temperature deviation in steady-state, according to IEC 60068-3-5, dependent on test chamber temperature time-wise ±0.1 to ±0.3 K spatially ±0.5 to ±1.0 K Humidity range: 10% to 98% r.h. Electrical connection: Rated voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 1.7 kW Rated current: 9.5 A (Neutral conductor plug: loaded) Schuko approx. connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Weight: approx. 380 kg net Refrigerant: R-134A Buyer Information for Your Safety! The following procedures are carried out on our climate chambers prior to sale: 1. Function check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) Technical specifications and information subject to change and errors! Feel free to call us with any further questions.

Condition: excellent (used), max. temperature 1200 Grad Bljdpfx Ajxcbldjacjp size of opening 220 x 120 mm depth of chamber 400 mm dimensions of the machine ca. 1,4 x 1,2 x 1,6 m

Condition: used, Year of construction: 2009, functionality: fully functional, Industrial complete line for thin glass < 2 grinding machines 2 washing machines 2 HEGLA cutting and breaking tables (incl. camera) 2 cullet disposal lines (ZIPPE), incl. crusher, chute, conveyors and belts, dedusting system, etc. Water treatment system (Envirochemie) Scanner TAMGLASS tempering furnace ProE-2442-ABS-20 for thin glass Gantry drilling machine Line scanner incl. license Several robots (ABB) Various transport belts (roller / belt) Blodoxft U Aspfx Aacep Several turntables Several tilters Glass storage Thread feeder Paper laying machine Various computers, monitors, etc. More pictures and videos available upon request. Location: Germany, inspection possible, power supply available >>>>Dismantling and installation can be offered!

Condition: as good as new (ex-display), Year of construction: 2025, Immediately available, in stock, brand-new unit with warranty - Temperature: 250°C - Internal dimensions (W x D x H): 1500 x 3000 x 2000 mm - External dimensions (W x D x H): 2410 x 3560 x 2730 mm - Volume: 9,000 liters - Control system: Eurotherm Nanodac, 100 programs with 25 segments each An additional 100 programs can be stored/loaded via FTP or USB flash drive - 2 recirculating air fans - Double doors with safety door sensors Bodpfx Aaelkb Ezecolp - Overtemperature protection: Eurotherm 3216i - Controller/recorder with color touchscreen display - Robust steel construction, exterior in anthracite - Motorized dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating capacity, approx. 70 kW - Recess for easy cart entry - Documentation, CE declaration of conformity - Electrical schematic including spare parts list We are pleased to offer transport, installation, and on-site operator training for your staff. Also available as a new unit with exhaust fan and other configurations! Delivery time approx. 10–12 weeks. Please get in touch! We offer new and used industrial ovens and can also modify or upgrade them according to your requirements. Inspection by appointment is possible at any time in our machinery warehouse. Oven, ovens, drying oven, industrial oven, drying cabinet, heating oven, heat cabinet, recirculating air oven, chamber oven, preheating oven, chamber recirculating oven, tempering oven, annealing oven.

Condition: good (used), functionality: fully functional, Vacuum drying chamber from ISVE. ISVE control system was brought up to date in 2024, machine inspected. Blsdpfx Aajxgdrbocjp

Condition: reconditioned (used), Overhauled and new painted. The pictures are sample photos of similar machines and are intended to show the execution and quality of the overhaul. All wear parts are renewed. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Plate size: 630 x 630 mm dimensions: approx. 2000 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 210 liters Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", centered Number of plates: 25 plates Material plates: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filtrate trough + drip plate in plastic. Motor hydraulics with single acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator must push back the pressure plates by hand. Bjdpfxei Igi Ie Aacjlp Optional: Filling pump as piston diaphragm pump or compressed air diaphragm pump.

Condition: excellent (used), White Type: SC/KWT 450 Salt Spray Chamber Technical Specifications: Test chamber capacity: 450 liters Max. load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Blodsw Strcepfx Aacjp Corrosion tests: Salt spray test: Room temperature up to +50°C Condensation test: Room temperature Up to +45°C Humidifier +75°C Temperature stability The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW, Rated current 8.7 A Combination: Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Plasma-nitriding furnace, make Ipsen type: VVPH useable dimensions: ø800 x 1200 (H) mm charge weight: 600 kg gross Blsdpfexc D E Hsx Aacop heating power: 100 kW working temperature: 150 – 600°C PLC: Siemens S5 plasma generator: MAG-Puls QT 800/50/150-UP plasma generator: MAG-Puls was newly acquired in 2008

Condition: good (used), Year of construction: 2002, ESG: 6 - 19 mm, TVG: 4 - 12 mm, Size that can be covered: 2800 x 6000 mm, Power: Heating: 1060 kW, Motors: 235 kW, Bedpfxjrck Hwj Aacolp Total power: 1295 kW.

Condition: used, Description: Emission Test Chamber Manufacturer: Vötsch Model: VCE 200 Test chamber volume: 200 liters Temperature range: +20°C to +130°C Humidity range: 30 to 95% RH Temperature deviation: temporal ± 0.3 K Temperature deviation: spatial ± 0.5 K Average temperature change rate: cooling approx. 0.3 K/min, heating approx. 0.4 K/min Dew point range: +5°C to 60°C Humidity deviation: temporal ± 1 to 3% RH Voltage: 3/N/PE AC 400V±10% 50Hz Rated power / rated current: 21 kW / 41 A Refrigerant: R404A Internal test chamber dimensions: 610 x 610 x 560 mm (W/D/H) Overall dimensions: 1250 x 1700 x 2350 mm (W/D/H) Weight: approx. 750 kg Item Condition: Used item as shown in the pictures Please contact us if you have any questions Bodpexg Hrqjfx Aacelp Shipping: The quoted shipping costs apply to deliveries within Germany Worldwide shipping available (please inquire for shipping costs outside Germany) The given shipping costs apply to shipping within Germany Sale exclusively to business customers, without warranty or guarantee. Deviations from technical data and errors in the item description may occur and are reserved.

Year of construction: 1988, condition: used, machine/vehicle number: 8829-III, max. temperature: Vorwaerm-/Haertekammer 1000/1350 °C electrical connection: 380 V kW dimensions of the machine: 1150 x 1500 x 1840 mm weight: gesamt ca. 900 kg heating capacity: Vorwaerm-/Haertekammer 9/25 kW Bedpfx Ao Rxa Neacjlp

Condition: reconditioned (used), Overhauled and new painted. The pictures are sample photos of similar machines and are intended to show the execution and quality of the overhaul. All wear parts are renewed. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Plate size: 630 x 630 mm dimensions: approx. 2900 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 312 liters Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", centered Number of plates: 40 plates Material plates: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Bodpsnh Nr Iofx Aacslp Painting: primed and painted in RAL 5010, filtrate trough + drip plate in plastic, Motor hydraulics with single acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator must push back the pressure plates by hand. Optional: Filling pump as piston diaphragm pump or compressed air diaphragm pump.

Condition: excellent (used), CTS Type: TS-70/1150-10 CTS Temperature Test Chamber, Water-Cooled Control: 32-bit Controller LCD Operating Panel Digital Display of Set and Actual Values Numerical Input of Set Points Error Messages in Plain Text RS 232 Interface Ethernet Interface Free control channels for customer-side DUT (device under test) actuation Operation: capacitive touch display & PC-based control (USB/Ethernet) Test Chamber Dimensions: Height approx. 1250 mm / Width approx. 1000 mm / Depth approx. 920 mm External Dimensions: Height approx. 2000 mm / Width approx. 1800 mm / Depth approx. 1600 mm Temperature Testing: Temperature Range: -70°C to +180°C Temperature Deviation: ≤ ±0.5 K over time Temperature Change Rate according to IEC 60068-3-5 Heating: 10 K/min Cooling: 10 K/min Thermal Load: approx. 5000 W at -20°C Technical data refer to an ambient temperature of +25°C Test Volume (interior): approx. 1150 liters Bledow R Tunepfx Aacop Operating Data: Electrical Connection Nominal Voltage: 400V 3/N 50Hz Power: 27.6 kW Nominal Current: 47.5 A Refrigeration System: Two-stage R404A (17.8 kg) + R23 (5.4 kg) Weight: approx. 1500 kg The following steps are completed on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and error in technical data and information!) We are happy to answer any further questions you may have by phone.

Condition: used, Electrically heated tempering furnace with protective atmosphere Bledsxcphmjpfx Aacop Type: TSK-8-10-12-80 Temperature: max. 800°C Internal dimensions (W x H X D):800 x 1050 x 1200 mm Heating power: 80 kW Atmosphere fan: 4,0 kW

Year of construction: 2017, condition: good (used), functionality: fully functional, Furnace Housing Dimensions External dimensions: - approx. 3,800 x 4,300 x 2,200 mm Internal (usable) furnace dimensions: - approx. 2,440 x 1,400 x 1,200 mm Batch Load weight: - 9 boxes (net weight 50 kg/each) - approx. 250 kg material per box - stack arrangement 3x3 Performance Data - 1 gas recuperator burner - 160 kW rated heating capacity - Max. allowable chamber furnace temperature 720°C - Max. allowable post-combustion temperature 1,020°C - 1 temperature control zone Temperature Control Range - Chamber furnace 480°C – 700°C - Post-combustion 850°C – 1,000°C Supply Media - Natural gas L or H - Gas inlet pressure 80 mbar - Voltage 400 V Blodpfexcybkjx Aacsp - Frequency 50 Hz - Connected load 8 kVA - Compressed air 6 bar, dry, oil-free Material: e.g. brass or bronze

Year of construction: 1992, condition: used, max. temperature 1100 Grad Bledew Rrf Sepfx Aacop size of opening ca. 250 x 120 mm depth of chamber ca. 290 / 310 mm heating capacity 2,7 kW weight of the machine ca. 100 kg control "Thermocomputer TC 5040"

Condition: good (used), Climatic Test Chamber +10°C to +90°C, Air-Cooled The test chamber is designed and built for climatic testing within its operating range. Test procedures that determine the influence of temperature and humidity on material properties and functional reliability of the test specimen can be performed. The test chamber can be operated in manual mode (fixed-value mode) or automatic mode. The EDIT program can be used to program extensive climatic tests and save a maximum of 99 test programs. These test programs are run in automatic mode. The test chamber can be controlled during operation via the RS 232 interface with a computer and the TSI software or in ASCII mode. The operating temperature limiter protects the test specimen from excessively high temperatures. To protect the test specimen, the upper and lower temperature limits can also be set on the terminal. Manufacturer: Heraeus Vötsch Type: VC 0033 Bodsxbnkwjpfx Aacjlp Specifications for temperature tests: Temperature range: +10°C to +90°C Humidity range: 30 - 95% Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 2.7 kW Rated current: 12 A Refrigerant: R 404A Test chamber volume: approx. 333 liters Humidity range: Humidity range for normal operation (ranges 1 and 3) with a dew point limitation of +5°C Humidity range 3 is omitted if additionally equipped with a capacitive humidity measurement system Tolerances for standard climate conditions 23°C/65% RH Temperature ±0.1 K Humidity < ±1.5% 85°C / 85% RH Temperature ±0.1 K Humidity

Year of construction: 2001, condition: used, functionality: fully functional, MAPPI AU 1F 1S 900 1800 O.4 R.S.A. – year 2001 Tempering Furnace Maximum glass dimensions: 900x2000 mm Bjdpfx Aajxt N Injcelp Thickness: 4-19 mm

Year of construction: 2020, condition: excellent (used), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: designed for a maximum load of 250 kg Specifications for temperature testing: Temperature range: -55 to +180°C Temporal temperature fluctuation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Heating compensation: max. 8000 W Specifications for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98% RH Climate performance data (excerpt) Humidity range: 10 to 98% relative humidity (RH) Humidity deviation (temporal): At chamber center, in steady-state condition, depending on climatic setting: ±1 to ±3% RH Temperature deviation (temporal): At chamber center, in steady-state condition, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to the setpoint (in the range > 20% RH): ±0.5 to ±1 K Operational data: LED strip: 24 V, 6.8 W / 2 x Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10%, 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A Chamber is equipped with Greenmode Weight: approx. 2050 kg Buyer Safety Information! The following steps are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components Bjdpfx Aow R Rt Ieacslp 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) For further questions, we are happy to answer your call.

Condition: excellent (used), Heraeus Vötsch Type: VT 7021 Air-cooled temperature test chamber 1 port, nominal width 80 mm, Test chamber volume: 210 liters Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (heating): 2.5 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 800 W Test chamber dimensions: Width 560 mm, Depth 570 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50 Hz Rated power approx. 1.8 kW, rated current 12 A Refrigerant: R404A and R23 Weight: 355 kg For your safety as a buyer, please note the following information! The following procedures are performed on the chambers we offer, in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the details!) Blodpfxew Rz Tle Aacep For further questions, please feel free to contact us by phone.

Condition: good (used), Vötsch Model: VCS 7130-15 Vötsch Climate Test Chamber, Water-Cooled Temperature Test Data: Temperature range: -70°C to 180°C Temporal temperature deviation at center of workspace: ±0.3 to ±0.8 K Spatial temperature deviation: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 16 K/min Cooling: 14.5 K/min Climate Test Data: Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temporal temperature deviation at center of workspace: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation at center of workspace: ±1 to ±3% RH Maximum heat compensation: 8000 W Enclosure dimensions: External dimensions with hinges and door lock: Height: 1995 mm, Width: 1680 mm, Depth: 1855 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1300 mm, Depth: 1855 mm Internal dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm Test chamber volume: approx. 1300 liters Feedthroughs: The test chamber is equipped with feedthroughs on both the right and left sides. These allow for test leads and testing devices to be routed into the chamber. 1 x R1 NW 125 mm 1 x R1 NW 140 mm 1 x L1 NW 50 mm Test chamber illumination: Halogen bulb 24V, 50W Power supply: 3/N/PE AC 400V ±10% 50Hz Rated power: 44.0 kW Rated current: 63.0 A Customer-provided fuse: 100 A slow-blow Maximum heat output to the environment: 2.2 kW Permissible test item weight: Total load on shelf supports: 100 kg Test chamber floor: 150 kg, Removable shelf: 50 kg Refrigerants: R 404A/R 23 Bledpswvgwbefx Aacop Weight: 1900 kg For your security as a buyer, please note: The following steps are carried out in advance on our chambers offered for sale: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data and specifications!) We are happy to answer any further questions by phone.