Used Chamfer for sale (344)

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1300 mm plate height: 190 mm Plate thickness: 95 mm Kdedsu N D Ipepfx Addeg weight of the machine ca.: 4,15 pro Platte t transport dimensions LxWxH: ca. 4,0 x 1,3 x 0,2 / pro Platte m very good steel plate for sale free, packed in oiled paper and foil AP 4000x1300 - ground steel plate Ra 0.8 Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x stop swivel) *

Condition: used, Technical details: floor-plate length: 2500 mm plate width: 1250 mm plate height: 100 mm transport dimensions LxWxH: 2,53 x 1,25 x100 m Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered Kdodowm Ngtjpfx Addog 8 through-holes with D=17mm *

Condition: used, Year of construction: 1984, Technical details: pressure: 50 t chamfer lenght: 2550 mm distance between columns: 2045 mm throat: 250 mm stroke: max. 170 mm Kdsdpfeu Ib D Ejx Addjg back gauge - adjustable: ca./approx. 800 mm control: DELEM DA 24 e stroke speed - idle stroke upwards: 80 Hub/min stroke speed - idle stroke downwards: 160 Hub/min total power requirement: ca./approx. 7,5 kW weight of the machine ca.: 6,2 t machine dimensions LxWxH: 3,3x1,8x2,7 m - back gauge motorized adjustable - crowning - biggest distance between table and bottom edge of the ram = 600mm - smallest distance between the table and the lower edge of the ram = 430mm The machine has a control malfunction ( DELEM) and will be sold as is! i.D. *

Condition: used, Year of construction: 1987, Technical details: pressure: 200 t chamfer lenght: 4000 mm distance between columns: 3530 mm control for program: DNC 7000 max. stroke: 220 / min: 200 mm throat: 320 mm ajustment speed: 70 - 80 mm/sec working feed: 10 mm/sec return speed: 49 mm/sec back gauge: 700mm motorisch table-size: L x B: 4110 x 180 mm work height max.: inkl. Tischverlängerung mm interface: RS 232 connection voltage: 380 V Kedpsu Icc Aefx Addsdg total power requirement: 15 kW weight of the machine ca.: gesamt: 17,0 t machine dimensions LxWxH: 4,6 x 1,6 x 3,3 m incl. 2 pieces table extensions rear support 700mm travel motorized and 2 pieces support blocks with travel 1500mm motorized right/left operation via control panel swiveling and 2x foot operation Hydraulics: max. pressure 318bar; oil filling approx. 170 liters; pump capacity 19.3 l/min. Control DNC 7000, graphic display, PC software equipment: Cutting zone lighting stroke counter div. Tools optional *

Condition: used, Year of construction: 1980, Technical details: rpm spindle (continous): 2000 - 2500 U/min double strokes/min.: 25; 37; 50; 75; 100 H/min. Grinding-wheel diameter: Ø 250 mm Kedpfx Aou Ng I Eoddjdg work height max.: 1350 mm total power requirement: 2,7 kW weight of the machine ca.: 1,0 t dimension machine xH: 0,85 x 1,0 x 1,8 m Use for medium to larger metal circular saws from 250 - 1450mm. Saw blade attachment Ø 60 to Ø 80mm and shaft Ø 31,5mm Tooth pitch up to 42mm Tooth depth adjustment via scale Front cutting tooth: can be chamfered on both sides up to 45° and overcut at pitch 0.02mm *

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, trailing chamfering unit on upper spindle, air cushion table with dual-axis control for left and upper spindle, brand new control system (latest Weinig version) Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 units 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Electric height adjustment for upper spindle Optional with/without feed system Feed brake system: Yes Feed speed stepless up to: 3 - 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. jointing allowance: 10 mm Jointing rebate cutter on jointer: Yes Powered rollers in table: 1 unit Control system: PLC control Spindle readout: mechanical digital display Infeed rollers before jointer: Yes Air cushion table: three-strip Kedpfewwwkhjx Addjdg Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Location: Nattheim

Condition: excellent (used), Year of construction: 2012, Brand KDF110 Optimat Ambition - only 1150 hours Brand: Brandt Model: KDF 110 Year of manufacture: 2012 M-Nr.: 0-261-20-6960 Kjdpfx Adjxvirfjdodg Control system: Easy Control 10+ contactless line control, feed-regulated with start-stop optical-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers / product guidance: Central control, 2 roller tracks Jointing milling unit: 2 x 0.75 kW, 200 Hz including jointing cutter set in DIA version with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing station for hotmelt glue with option for PU application, magazine, pressure zone with electro-pneumatic 2-point positioning via central control unit Pressure zone: First roller driven and 2 free-running rollers for excellent and consistent compression End trimming unit: 0.18 kW, 12,000 rpm Profile milling unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counterrotation, 3-position adjustment chamfer/radius (R2), overhang and straight, max. 3 mm edge thickness with Siko counter Profile scraper: Max. 3 mm edge thickness Surface scraper: Reversible blade Chain width: 80 mm Edge material in rolls: 0.4 – 3 mm End trimming device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Minimum workpiece width: • For workpiece thickness 8–22 mm: 70 mm • For workpiece thickness 23–40 mm: 120 mm (Depending on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed speed: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Overall length: 3,672 mm Location: ex stock 54634 Bitburg - Immediately available -

Condition: ready for operation (used), Year of construction: 2010, pressure 220 t chamfer lenght 3720 mm distance between columns 3020 mm column arm 400 mm ajustment speed 125 mm/sec working feed 10.0 mm/sec return speed 132 mm/sec back stop - adjustable 800 mm stroke 275 mm dayligth 550 mm table height 900 mm oil volume 300 ltr. total power requirement 18.5 kW weight of the machine ca. 12800 kg. range L-W-H 5850 x 2220 x 2820 mm - in checked conditions - machinevideo - ?v=d-ZVBtFsjI4 Features: - Electro-hydraulic CNC press brake - With DELEM CNC control model DA 66W * 2D graphic programming * Automatic bend sequence calculation and collision detection * High-quality color LCD screen (TFT) - Swivel control panel, front left - CNC-controlled axes: Y1 + Y2 + X + R + crowning - CNC electric motor-driven backgauge (X axis) - CNC electric motor height adjustment of the backgauge (R axis) - CNC electric motor-driven bending table crowning - 2x manually adjustable stop fingers Kdodpfx Adoxfwc Dodeg - AMADA/PROMECAM upper tool holder - 1x reversible MULTI-V die block - 2x front sliding support arms (“sliding” system) - Side guard * Swivel doors + FIESSLER laser safety device - Rear safety device (light barrier) - 1x freely movable foot control - Original operating instructions * Special accessories included in delivery: - 1x NEW complete upper tool set - split (currently not installed) * ROLLERI PS.135.85.R08 * Height 135 mm / 85 degrees / R 0.8 mm

Condition: good (used), Pipe processing machine Manufacturer: probably Banning Year of manufacture: approx. 1983 Kdsdpfovtbi Ujx Addjg Type: Pipe diameter: 14 mm Use: cutting to length, beading for sealing and chamfering pipes Dimensions: 1,500 x 800 x 1,200 mm Weight: approx. 0.8 t

Condition: used, Year of construction: 2010, pressure 40.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 200 mm Kdjdpfox Emqtex Addog stroke 100 mm dayligth 308 mm ajustment speed 150 mm/sec working feed 1-10 mm/sec return speed 100 mm/sec table width 100 mm table height 900 mm control DNC 60 PS oil volume 100 l voltage 400 V total power requirement 5.5 kW weight of the machine ca. 2750 kg Equipment: - CNC electro-hydraulic press brake - CYBELEC "DNC 60 PS" CNC control * Swiveling control panel, front left * Tool & program library - CNC electro-motorized backgauge (X-axis) * X-axis travel = 800 mm * 2x manually adjustable backgauge fingers (R+Z axes) * Backgauge on ball screws - CNC controlled axes Y1 - Y2 - X - Rehfuß upper tool system "A" with quick-change clamping * Additional crowning device in the tool holder - 4V universal die block with 60 mm die shoe - 2x sliding material/support arms ("Sliding System") - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine - FIESSLER AKAS laser safety device in front of the machine - 1x freely movable Double Foot Switch - Operating Instructions (PDF)

Condition: excellent (used), Hundegger K2 Industry 5-Axis CNC Timber Joinery Machine 5-axis machining capabilities – Maximum machining section: 300 x 620 mm Machining operations: Section probe detector, section measurement – Cutting: All straight cuts and any angle, horizontal and vertical, birdsmouth, valley and hip rafters, rebates, half-lap joints, chamfering, groove, straight and angled birdsmouth groove, web notch – Milling with aggregate head (hogging head) and other milling cutters, mortise and tenon, mortises, notches, scarf joints, dovetail joints (straight and angled), Gerber scarf – Drilling: straight and angled, deep-hole drilling – 1x side drill and 1x underside drill. Ink marking system – Piece identification labelling Control console and software: The control system allows importing data from CAD software and automates the calculation of complex machining operations. Work is currently performed with CADWORK software (not included in the sale of the machine). The machine features a pit designed for the elimination of wood waste and sawdust. This HUNDEGGER K2 CNC is fully upgraded and refurbished! Dimensions: - Machine: Length 22,900 mm x Depth 5500 mm x Max. height 2550 mm (on the floor) - Waste pit: approx. Length 12,000 x Width 2,400 x Depth 950 mm - Timber feeding length: 13,000 mm - Max. timber output length: 13,000 mm - Transverse infeed conveyor: 5 chains, 2,200 mm - Extendable timber support table - AQF feed chain with shaft extension, 2,900 mm - Under-table pivoting crosscut saw - Right-hand safety flap Ksdpfx Adox U Ti Uedsdg Waste evacuation system located below – Control for waste extraction system – Universal 5-axis milling unit with profiling tool, dovetail cutter, multiple finger joint cutter, combined vertical tool holder, drilling unit, finger joint cutter, combined horizontal tool holder, rebate unit / Drilling unit 1 and 2 – Marking device – Pneumatic beam turn-over station – Outfeed table with 7 arms Year of manufacture: 2003 Purchased by current owner in 2020. Machine was fully reconditioned in 2020: electrical, mechanical, pneumatic, tooling, and IT systems (dismantling parts and motors, replacement of bearings, hoses, cables, guideways, IT update and EKP data export, cleaning, new tooling in 2020) The machine is in very good technical and visual condition.

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Max. workpiece height approx. 40 mm Min. workpiece length approx. 250 mm Min. workpiece width approx. 70 mm Feed rate approx. 11 m/min Ready for operation in approx. 4-5 min Power consumption approx. 11 kW With quick-heating glue reservoir Pneumatic edge trimming up to 3 mm With cross-cut saw for edge thickness up to 5 mm With milling station, optionally equipped with combined reversible blade cutters for radius, straight and chamfer milling Kdedpfxsx Rr Dvs Addeg Outrigger, foldable and extendable to the front With chassis L x W x H: 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: short-term Location: Flörsheim

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: SOP10107, travel distance X-axis: 355 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 455 mm, table width: 381 mm, table length: 457 mm, spindle speed (min.): 10,000 rpm, number of slots in tool magazine: 8, XYZ Machine Tools XYZ 2-OP (2020 Model) Upgrade your workshop with this reliable and high-performance CNC machine from XYZ Machine Tools Ltd, a trusted name in precision engineering. Machine Specifications: Feature Spec / Capability Travel (X × Y × Z) ~ 355 mm × 305 mm × 455 mm Kedjxd Dgyjpfx Addsdg Table size ~ 457 mm × 381 mm Max work load ~ 250 kg Spindle BT30 taper, 10,000 rpm, ~ 3 hp (≈ 2.2–2.3 kW) motor Tool changer 8-station automatic tool changer Rapid traverse ~ 15 m/min (X/Y/Z) Control ProtoTRAK TMX conversational CNC (menu-driven, with G-code compatibility), USB file transfer Accuracy / repeatability Positioning accuracy typically around ±0.005 mm (varies with condition), repeatability ±0.003 mm Footprint ~ 760 × 1,220 mm, ~ 2.5 m tall Machine weight ~ 1,100 kg • Year of Manufacture: 2020 • Rated Voltage: 400V • Full Load Current: 15A • Short Circuit Rating: 10kA • Phase: 3 • Cycle: 50Hz • Main Motor Power: 2.2 kW • Max Spindle Speed: 10,000 RPM • Pneumatics: 6 bar / 100 L/min • CE Certified _____ Practical machining use • High-speed drilling, tapping, and small-tool milling: The 10k rpm spindle makes it much better for smaller cutters (Ø3–10 mm) and aluminium machining compared to the older 6k rpm version. • Secondary ops & light milling: Great for “clean-up” cuts, bolt holes, chamfers, flat milling, and side ops after turning. • Batch work with multiple ops: The 8-station tool changer is limiting, but with smart tooling (spot, drill, tap, end mill, chamfer, face) you can cover a lot. • Compact footprint: It can be placed near lathes or VMCs to absorb “2-op” bottlenecks. Condition: • Excellent working order • Lightly used, well-maintained. Has only been used to make Aluminium and Nylon shop fittings. • Ready to go straight into production Why Choose the XYZ 2-OP? • Precision engineering and durability • High spindle speed and robust motor for versatile machining • Compact and efficient design • Backed by XYZ’s reputation for service and reliability Don’t miss this opportunity to own a top-quality XYZ 2-OP machine—perfect for workshops, tool rooms, and production facilities looking to boost their machining capabilities.

Condition: used, Year of construction: 2001, with air cushion table, chamfering unit Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 pcs 1st spindle: bottom Spindle diameter: 40 mm Clamping length: 270 mm Speed: 6000 rpm Motor power: 11.0 kW 2nd spindle: right Spindle diameter: 40 mm Clamping length: 170 mm Speed: 6000 rpm Motor power: 11.0 kW 3rd spindle: left Spindle diameter: 40 mm Clamping length: 170 mm Speed: 6000 rpm Shared motor with right spindle With ATS/M system (automatic positioning control) 4th spindle: top Spindle diameter: 40 mm Clamping length: 270 mm Speed: 6000 rpm Motor power: 11.0 kW With ATS/M system (automatic positioning control) 5th spindle: top, beveling unit 6th spindle: bottom Spindle diameter: 40 mm Clamping length: 270 mm Speed: 6000 rpm Motor power: 11.0 kW Motor brakes: mechanical Electric hood locking: Yes Height adjustment of top spindle: electric, with feed Ksdpfjxr A Npox Addsdg Feed brake system: Yes Feed speed stepless up to: 3 - 26 m/min Feed roller pressure: pneumatic Feed drive power: 4.0 kW Feed drive: Cardan shaft Lubricating pump: automatic Max. cutting depth (joining): 10 mm Jointing cutter on planer: Yes Powered rollers in table: 1 pc Control type: PLC (programmable logic controller) Spindle position indicator: digital display Infeed rollers before planer: Yes Air cushion table: double track Central lubrication point: Yes Description: Joiner table with jointing fence 1.0 m, pneumatic pressure Infeed roller before planer Powered rollers in table Total connected load: 52 kW Location: Nattheim

Condition: new, Year of construction: 2026, Simply top - and practically as if by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Behind this is a sophisticated system that allows all production steps to be carried out with maximum precision at maximum speed. Perfect for all logs that are already milled and/or peeled and waiting for their final shape as posts, poles or palisades. Kdjdpshm S Ruefx Addjg Simply point - and practically by itself The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering and cutting to length in a few efficient steps and within one cycle time. Both models allow three process steps - coping, pointing and chamfering - to be carried out fully automatically at the same time. Without slowing down the production flow: For example, the single-length machine can handle up to 4,000 wood piles and more in single-shift operation. The powerful geared motors run up to top performance via frequency converters - for maximum speed in cutting and cycle time optimization. This has a particularly positive effect when handling different diameters: the processing speed can be easily adapted to the logs.

Condition: excellent (used), Professional set of milling and drilling tool holders with SK40 / ISO40 taper, compliant with DIN 69871 A standard. The set includes approximately 25 ready-to-use tools with mounted milling cutters and drills. Tool diameter range: from Ø4 mm to Ø12 mm – an ideal set for serial production. Holder length: 50 mm – compact and precise, perfect for CNC machining centers. The set includes various tool types: end mills, taps, countersinks, solid carbide drills, and chamfer mills. Some tools are coated – suitable for machining steel, stainless steel, aluminium, and cast iron. All holders are used and in good technical condition – inspected and ready for immediate use. Products from renowned brands: ZÜRN Germany and Orion. Option to purchase the entire set or individual items. Kjdpsxldr Eefx Addjdg

Condition: excellent (used), For sale: Industrial deburring machine from the German manufacturer Rolei Eisenblätter GmbH, model PEF 500. The device is designed for precise deburring, chamfering, and edge preparation of steel, aluminum, and other metallic workpieces. Manufacturer: Rolei Eisenblätter GmbH, Germany Model: PEF 500 Robust steel construction V-shaped work table—ideal for guiding components Electric drive with safety switch Kodpjw R E Hpsfx Addedg Application: edge processing, chamfering, weld seam preparation, and the removal of burrs after cutting and machining The machine is fully functional and in good technical condition. Extremely stable construction, ideal for workshops, metalworking shops, toolrooms, and series production.

Condition: good (used), For sale, Edge chamfering machine. - Assfalg ASO 750. - 1.1kw engine. - We will help you organize a profitable shipping company or courier. Kdedpsv T Ttfefx Addog

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Kdjdpfx Ajx Ux U Ajddog Edge thickness: 0.4 - 6 mm Modern control unit with selector switch for aggregate settings Fully automatic edge magazine for roll and strip material Glue application station GLU-JET cartridge + PU bonding Adhesive application via nozzle technology Touch-sensitive nozzle Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness Pneumatic adjustment of trimming saws from 0-10° angle Milling unit: flush trimming 6 mm, radius milling - bevel milling - 15° Corner copying unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper holders Surface scraper unit - finish Buffing unit Spraying device in infeed and outfeed areas, as well as for PU Machine supplied with all working units/tools Machine is WORKSHOP TESTED First delivered in 2016 Available ex stock Lieboch

Condition: used, mileage: 1,000 km, power: 129 kW (175.39 HP), first registration: 06/2024, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 06/2025, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, suspension: steel, total width: 2,550 mm, total height: 2,240 mm, Equipment: air conditioning, parking sensors, H07 Automatic climate control, LH9 LED front headlights, LA1 0400 Pure White, A86 limited slip differential, EE9 Battery, 2 x 12 V/100 Ah, maintenance-free, F62 heated rearview mirrors, JW0 reverse warning system, QQ1 towbar with ball hitch + 12V electrical kit (vehicle’s 12V system), RR9 spare wheel holder, double secured, SA5 driver's airbag, SH6 driver comfort air-suspension seat with horizontal suspension, VB5 long mirror arms incl. wide-angle mirror, YA2 transport wheel arches incl. reflectors on frame. BODY Ideal for natural stone or stonemasonry business. BODY Platform subframe: welded and hot-dip galvanized lightweight steel auxiliary frame, cross members spaced approx. 500 mm apart, platform floor made of 21 mm thick, multi-layer bonded phenolic plywood panels, platform floor frame profile: lashing-lock outer frame with chamfer, hole diameter 30 mm. BODY Platform superstructure: fixed, welded, hot-dip galvanized front wall, cab height, with 3 rows; lashing rails Quar, approx. heights 450 mm/900 mm/1,300 mm; platform side wall: 400 mm high and 25 mm thick aluminum; fixed rear wall: anodized silver, hollow-chamber profile, 400 mm high and 25 mm thick aluminum. BODY Paint: Subframe and front wall completely hot-dip galvanized. BODY Loading crane: FASSI LOADING CRANE F55A.0 e-active, slewing range 370°, 6-function RCS radio remote control (linear levers) with display and XP system, D850 control block with 5 control valves, operable from one side, hydraulic. Subject to prior sale and errors excepted. The vehicle description serves for general vehicle identification only and does not constitute a warranty in the legal sense of a sales contract. For exact equipment details, please contact our sales staff. Please contact us. ... more on our homepage. Kodpfxox Uanqo Addjdg

Condition: used, Year of construction: 1994, Machine: Edge banding machine Manufacturer: Hebrock Model: AKV 2001 DK Year of manufacture: 1995 CE type tested GS wood dust tested Workpiece width min.: 70 mm Workpiece length min.: 300 mm Workpiece height min.–max.: 8 – 50 mm Edge thickness min.–max.: 0.4 – 8 mm Feed speed: 11 m/min Heated infeed fence New compressed air line Crosscut saw unit Kdsdox Tcbqopfx Addjg Flush and radius milling unit Hot-melt adhesive container Support plate Pneumatic end trimming up to 3 mm edge thickness Flush trimming unit with combination cutter for radius, straight, and chamfer milling Extraction connection: Ø 140 mm Connection: 380/50 Volt/Hz Total connected load: 12 kW Weight: approx. 550 kg

Condition: used, empty load weight: 28,700 kg, overall weight: 98,000 kg, axle configuration: > 3 axles, first registration: 07/2009, next inspection (TÜV): 05/2026, tire size: 285/70 R19,5, color: yellow, Equipment: ABS, Hydraulically liftable and lowerable gooseneck • Ball bearing turntable-mounted fifth wheel plate, 3 1/2" kingpin and adjustable steering wedge • Built-in hydromechanical double steering for steering pendle axles (dual-circuit steering, 4 hydraulic cylinders) • Hydraulic lift and lower function, hydraulic differential lock • Hydraulic connection for tractor unit Shaped loading platform (approx. 3,600 x 2,480 mm) with checker plate covering and chamfered front corners • Designed for a technical fifth-wheel load up to 30 t Steering radius approx. 2,500 mm Kdjdpfsx Sragox Addsg Controls for hydraulic functions located on the left in the direction of travel, incl. folding protective cover Gooseneck mounted directly onto the chassis for the shortest possible construction length and rigidly welded in place GOLDHOFER 2-axle running gear with THP/ET special axles permanently fixed to the hydraulic gooseneck two single-tire pendle axle units with hydraulic axle compensation with a total of 4 wheels per axle line Tyre size 285/70 R 19.5 150/147 J TL Chassis width 2,750 mm, wheelbase 1,360 mm Technical axle load per axle line max. 14 t (at 70 km/h) Maximum steering angle of the pendle axles approx. 70 degrees Loading height at mid position 1,240 mm (loaded) Hydraulic axle lift ±300 mm Dual-circuit hydromechanical steering system Two-line full-air brake system with spring-loaded parking brake, ALB brake and automatic slack adjusters (AGS) ABS brake (anti-lock braking system, Wabco make) Hose burst safety valves on all axles Hydropneumatic gas storage suspension can be deactivated when loaded Rear frame-integrated adapter element in a short and narrow compact design for connecting between chassis and flatbed deck Errors excepted

Condition: used, Year of construction: 2018, Available after alignment of the panel: from the operator to the left Max. edge banding thickness: 3 mm Min. workpiece thickness: 8 mm Max. workpiece thickness: 40/60 mm Min. workpiece width: 80 mm Min. workpiece length: 190 mm Feed speed: 10 m/min Heating time: 5 min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutter, diameter: 100 mm, height: 48 mm Adjustment of infeed fence: manual Guillotine up to: 3 mm Individual edge feeding: possible Gluing: glue contact roller PUR gluing: possible Cut-off saw: Yes Combination unit flush/chamfer/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Scraper: Yes, with sensor Aggregate display: on the display Control type: PLC line control Operation: touch screen Kdsdpfxex Rdm Aj Addeg Motor power: 12 kW Travel device: Yes Extendable roller support: Yes Protective hood: Yes Weight approx.: 1250 kg Extraction diameter: 80/140 mm Including additional change-over glue pot Location:

Condition: new, maximum load weight: 96,590 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Excerpt from the equipment specification. Full specification available upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable as well as detachable. Length approx. 3,650 mm * 2 pairs of folding lashing rings to the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the middle section of the gooseneck (LC 10,600 daN) * For tractor unit: 6x4 or 8x4 Kdedpfexn E Iyox Addeg 2-axle front bogie: * Pin-eye coupling front and rear. Length: approx. 2,970 mm * Chassis width: approx. 2,750 mm * 1 pair of lashing rings (LC 10,000 daN) in the outer frame * 2 pairs of lashing rings (LC 10,000 daN) on the central beam Loading platform: * 6-axle double telescopic loading platform with pin-eye coupling at the front and chamfering approx. 500 mm x 8° at the rear, length approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * 7 pairs of lashing rings along the central beam (LC 10,000 daN) Pendulum axle 2-axle front bogie: * PENDULUM AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinder with shut-off valves and safety pins for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Pendulum axle 6-axle loading platform: * PENDULUM AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinder with shut-off valves and safety pins for securing in the raised position * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation Tyres: * 24x brand of our choice (M+S) 245/70 R17.5 load index 143/141L (146/146F) Paintwork: * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final paintwork with 2 coats of 2K topcoat, single colour in RAL 3002 Carmine Red * Rear section metallised and painted RAL 9010 (Pure White) Options included: * Truck hydraulic connection with flow controller (20 l/min), including support arm for supply lines, tractor unit tank must be at least 80 L * with MAX Trailer coupling pieces, otherwise coupling pieces to be supplied free ex works by the customer * 3.5 inch king pin * Steel front wall, approx. 400 mm high * Removable ALU side boards and rear wall on the gooseneck, approx. 400 mm high, anodised finish * Socket for remote steering operation on the gooseneck with cable remote control and push buttons including single-wheel tracking alignment (without installation in the tractor unit) * Control lever on the gooseneck protected by a foldable cover * Illuminated gooseneck control area with on/off switch * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2 * Hydraulic connections from gooseneck to lowbed with screw couplings * BEKA-MAX central lubrication system for a 2-axle bogie with standard grease NLGI-2 * Stake pocket strips mounted transversely in the load floor for plug-in stakes approx. 100 x 50 mm * Chassis surface finished with sand coating for anti-slip protection * Hydraulic coupling pin * BEKA-MAX central lubrication system for the loading platform with standard grease NLGI-2 * Surface of the loading platform finished with

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Kedpjvvkd Tjfx Addjdg Storage location: Nattheim