Used Column Drilling Machine for sale (67,036)

Condition: used, drilling capacity steel/GG: 15 mm spindle taper: 1 MK Bledpfevxpp Hex Aaajf arm length: 300 mm table size: 210 x 300 mm spindle sleeve stroke: 110 mm spindle turning speed range: 200 - 3000 rpm engine: 380 V, 1,1 kW space needed: 850 x 420 x 1860 mm weight: 220 kg

Condition: used, Year of construction: 1971, drilling capacity steel/GG: 23 mm spindle taper: 3 MK arm length: 275 mm table size: 300 x 400 mm spindle sleeve stroke: 90 mm spindle turning speed range: 100 - 1180 rpm carriages: 0,1/0,6/0,25 mm Bedperz Nqaofx Aaajlf engine: 380 V, 1,25/2,15 kW space needed: 850 x 400 x 1770 mm weight: 280 kg

Condition: ready for operation (used), Drilling capacity steel/GG: approx. 25 mm Spindle mount: 2 MK Thrust: 300 mm Table size: 305 x 380 mm Quill stroke: 115 mm Spindle speeds: 200 - 1200 rpm Blsdev Du Rajpfx Aaasf Drive motor: 380 V, 1/1.5 kW Space required: 800 x 400 x 1800 mm Weight: approx. 280 kg

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Blodpfxjqa Txqe Aaasf Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: ready for operation (used), Column Drilling Machine / ALZMETALL AB 3 ES from vocational school - Well-maintained original condition - Drilling capacity / steel max. 35 mm - Throat depth 280 mm - Table size 600x470 mm - Drilling stroke 180 mm - Morse taper MK 3 Bedpjyzakrjfx Aaajlf - Infinitely variable speed control - Drill depth stop - Speed display - Drill chuck - Documentation Dimensions: L x W x H 1.2 x 0.8 x 2 meters / Weight 480 kg Errors and omissions excepted.

Condition: used, machine/vehicle number: 8580, 3 automatic feeds 01, 02 -0.3mm/rev Bedjwtdmuopfx Aaaelf Table clamping surface: approx. 500 x 370 mm Table height adjustable via rack and pinion Machining base plate approx. 350 x 320 mm With motor: 1.5 kW, 1415 rpm, 380/220V

Condition: good (used), functionality: fully functional, rotational speed (max.): 1,400 rpm, rotational speed (min.): 32 rpm, throat depth: 355 mm, overall weight: 1,700 kg, drilling capacity: 50 mm, For sale: 1 used pillar drilling machine Manufacturer: WMW Saalfeld Bljdpfx Ajvytw Doaajf Type: BK50 AI Drilling capacity in steel: 50mm Thrust: 355mm Spindle mount: MK5 Speed: 32 - 1,400 rpm Table size: 770 x 640mm Clamping surface: 630 x 550mm Base plate: 490 x 530mm Machine weight: 1.7t The machine can be viewed in our warehouse in 09599 Freiberg.

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp Bedpexlqxfefx Aaajlf - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Spindle taper: MT 3 – short quill Distance spindle nose – table: 545 mm (short quill) Distance spindle adapter – table: 395 mm (MT adapter) Throat: 290 mm Blsdpfx Aoharwvoaaof Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Condition: refurbished (used), functionality: fully functional, spindle mount: MK 4, total height: 1,970 mm, throat depth: 345 mm, spindle speed (max.): 720 rpm, spindle speed (min.): 80 rpm, 1.) Alzmetall AB4/SV Speed range: 80–720 rpm Feed rate: 0.09/0.16/0.28 mm/rev Spindle taper: MK4 Throat depth: approx. 345 mm Drive power: approx. 1.8 kW Column diameter: approx. Ø 160 mm Quill travel: approx. 180 mm Table clamping surface: approx. 730x560 mm with 14 mm T-slots Dimensions: 1000x500x1970 mm Weight: approx. 600 kg Price: 2,400 euros net plus VAT. 2.) Gillardon GB30 Speed range: 60–1600 rpm Bodpfx Aasunhtxjaelf Spindle taper: MK3 Throat depth: approx. 320 mm Drive power: 1.1/1.6 kW Column diameter: approx. Ø 130 mm Quill travel: approx. 175 mm Table clamping surface: approx. Ø 500 mm with 14 mm T-slots Table swivel range: approx. + / – 90 degrees Dimensions: 1000x500x1970 mm Weight: approx. 400 kg

Condition: new, Year of construction: 2026, Thread cutting device Undercutting device Programmable drilling depth stop Drilling depth and speed display - digital Thread cutting device M30 (pitch-dependent) Option R1: Infinitely variable spindle speeds with intermediate gearing, speed range 100-2000 rpm Option R2: Infinitely variable spindle speeds with intermediate gearing, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle taper MK 4 Drilling depth 160 mm Throat 300 mm Usable table area (swiveling) 590 x 450 mm Feed rate 0-300 mm/min, stepless Table height adjustment with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor - three-phase 400 V, pole-reversible, 1.5/3.0 kW Weight 420 kg Option Drill Set No.6: Taper arbor B18/ MK 4, Keyless drill chuck B18/ 3-16 mm, Machine vice No. 2-140 and T-slot bolts, EUR 910.00 Option: Automatic spindle stop at upper drill spindle position, EUR 432.00 Option: Chip break module EUR 432.00 Delivery: free to site including packaging (Germany only) Warranty: 3 years NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS – REQUEST AN OFFER! Blsdpfx Aasd H Rh Roajf FLOTT AUTHORIZED DEALER

Condition: new, Year of construction: 2026, Continuous/Standard Drilling Capacity: 18/20 mm Thread Cutting Capacity: M12 (depending on pitch) Spindle Taper: MK II Drilling Depth: 100 mm Throat Depth: 240 mm Column Diameter: 82 mm Usable Work Surface (W x L): 340 x 280 mm T-slot Size (Arm), Spacing (mm), Slot Width (mm): Number: 2, 125, 13/26 Speed Display: Digital Drill Depth Display: Digital Drill Depth Stop: Quick-adjust stop ring Manual Drill Feed Table Height Adjustment with Rack-and-Pinion Motor: Three-phase AC – frequency-controlled, 230 V, 0.75 kW Spindle Speeds: Infinitely variable 30 – 3000 rpm Table Work Surface: 155 - 415 mm Base Work Surface: 155 – 550 mm Machine Dimensions: 355 x 705 x 1,825 mm Weight: 195 kg Blsdovu Tmnjpfx Aaajf Optional Accessories Drilling Bundle 3 consisting of: - Machine vice [felix] 2.0, 100 mm - Quick-action drill chuck 3-16 mm (accuracy 0.17 mm) - Taper shank MK 2 B18 and reduction sleeve MK 2 to MK 1 €485.00 D0Ezfi Factory warranty: 3 years Free delivery including packaging (Germany only) Delivery time: available immediately from stock NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS! ASK US FOR AN OFFER!

Condition: good (used), Year of construction: 2007, machine/vehicle number: 075912, Offer 26444 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Maximum drilling diameter in steel ST 60: 45 mm - Drill spindle taper: MK 4 - Drill spindle stroke: 200 mm - Throat depth: 385 mm - Table with 2 T-slots, height adjustable via hand crank - Table size: 550 x 480 mm - Min./max. distance between table and drill spindle: 120 / 650 mm - Column diameter: 200 mm - Electromagnetic feed rates: 0.1 - 0.2 - 0.3 - 0.4 mm/rev - With overload protection - Infinitely variable spindle speeds in 3 ranges: 60 - 1900 rpm - Drive: 400 V / 3 kW - Space requirement approx.: W 700 x H 2120 x D 1100 mm - Weight approx.: 700 kg Bledpfx Aeyvhuneaasf - Equipped with: thread cutting device, coolant system, digital speed display

Condition: excellent (used), Year of construction: 1980, table width: 460 mm, table length: 745 mm, space requirement height: 2,400 mm, space requirement length: 1,200 mm, space requirement width: 800 mm, Manufacturer: Alzmetall Type: AB 40 ST Spindle: MK 3 Bljdpfxovwkw Ao Aaaof Table dimensions: 745 x 460 mm Machine can be viewed under power

Year of construction: 1965, condition: used, Drilling diameter 30 mm total power requirement 0,74 kW Machine weight approx. 0.35 t drilling capacity in steel (diameter) 30 mm throat 300 mm drilling stroke 120 mm mounting MK 3 table surface 335 x 280 mm groove width 14 mm table adjustable in height 510 mm distance spindle/table max. 120 - 630 mm column base area 380 x 400 mm distance spindle / base plate 1160 mm Bledpsm Sg Tbjfx Aaasf Speed range - drilling 200 - 2500 rpm speed steps working spindle 4 column diameter 100 mm machined base plate: Yes table rotation approx. 180 ° space requirement approx. 0,9 x 0,4 x 1,9 m Control conventional

Condition: new, Bernardo Gear column drilling machine GB 50 HS Drilling capacity in steel50 mmDrilling capacity in cast iron60 mmThread cutting max.M42Drill chuck1 - 13 mm / B 16Morse coneMK 4Spindle speed / number of steps40 - 2100 rpm / 12feed range0,1 / 0,2 / 0,3 / 0,4 mm/reach370 mmDistance spindle / table max.600 mmDistance spindle / base plate 1190 mmSleeve stroke 250 mmPillar diameter200 mmTable size / T-slot size 600 x 500 mm / 14 mmMotor power2,2 / 2,8 kWMachine dimensions (W x D x H) 700 x 1050 x 2350 mmWeight approx. 670 kgScope of supply - Toothed ring drill chuck 1 - 13 mm / B 16 drill chuck mandrel MK 4 / B 16 reduction sleeve MK 4 / 3, MK 4 / 2 - Motorised table stroke coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector LED machine light - Initial filling with Shell Tellus 46 - Digital speed display - Digital drilling depth display - Height-adjustable protective cover Bedped Tm T Hsfx Aaaolf

Condition: new, COLUMN DRILLING MACHINE IBERDRILL BZ 40 TECHNICAL DATA - STANDARD max. drilling capacity for steel (St 60) at continuous power S1 Ø 40 mm max. drilling capacity for grey cast iron (GG 20) at continuous output S1 Ø 45 mm max. tapping capacity for steel (St 60) at continuous power S1 M 33 max. tapping capacity for grey cast iron (GG 20) at continuous output S1 M 39 tool holder in spindle MK 4 max. spindle stroke (drilling depth) 180 mm motor power spindle 4,12 kW Drive V-belt Speed adjustment stepless speed range for 50 Hz - motor, n = 1.500 rpm 100 - 2.000 rpm Feed automatic or manual Number of automatic feeds 3 gears range of automatic feeds 0,1 - 0,2 - 0,3 mm/rev Table dimensions (width x depth) 480 mm x 480 mm column diameter 150 mm distance spindle center / column 350 mm Machine weight (net) 470 Kg Gross weight 520 Kg Dimension transport v. (length x width x height) 2,3 m x 0,6 m x 1,1 m STANDARD EQUIPMENT / BASIC MACHINE V-belt drive with frequency converter Blsdpfx Aogy Haaoaaof infinitely variable speed adjustment via potentiometer digital speed display 3 automatic feeds electromagnetic clutch ergonomic 4-fold handle cross with integrated feed buttons scale with adjustable drilling depth automatic feed reversal during thread cutting automatic tool ejector movable, rotatable and tiltable work table ( type MGI ) machine base plate with machined support surface, T-slots and integrated coolant device integrated

Condition: new, COLUMN DRILLING MACHINE IBERDRILL BC-50 VE TECHNICAL DATA - STANDARD Bljdpogy Halsfx Aaaof max. drilling capacity for steel (St 60) at continuous power S1 Ø 50 mm max. drilling capacity for grey cast iron (GG 20) at continuous power S1 Ø 60 mm Max. tapping capacity for steel (St 60) at continuous output S1 M 42 max. tapping capacity for grey cast iron (GG 20) at continuous output S1 M 50 tool holder in spindle MK 4 max. spindle stroke (drilling depth) 200 mm motor power spindle 4 kW Drive 3-speed gearbox and V-belt Speed adjustment infinitely variable via potentiometer Speed range for 50 Hz motor, n = 1.500 rpm 30 - 300; 90 - 900; 190 - 1.900 rpm Feed automatic or manual Number of automatic feeds 4 gears range of automatic feeds 0,1 - 0,2 - 0,3- 0,4 mm/rev Table dimensions (width x depth) 550 mm x 550 mm column diameter 175 mm distance spindle center / column 360 mm Machine weight net/gross 760 kg / 850 kg Dimension transport v. (length x width x height) 2,4 m x 0,7 m x 1,3 m STANDARD EQUIPMENT / BASIC MACHINE Gearbox with quality gears and automatic oil pump lubrication and V-belt 3 gear speeds preselectable via 1 front lever 3 speed ranges with infinitely variable speed adjustment by means of frequency converter digital speed display integrated in front panel 4 automatic feeds electromagnetic clutch ergonomic 4-fold handle cross with integrated feed buttons handwheel for fine manual feed scale with adjustable drilling depth

Condition: new, Bernardo Gear-Driven Pillar Drilling Machine GB 32 S Vario Technical Specifications • Drilling capacity max.: 32 mm • Tapping capacity max.: M22 • Drill chuck: 1 – 13 mm / B16 • Morse taper: MK 4 • Spindle speed / 2 ranges: 90 – 980 / 1000 – 3000 rpm • Feed range: 0.06 / 0.12 / 0.18 mm/rev • Throat depth: 300 mm • Max. spindle to table distance: 670 mm • Spindle to base plate distance: 1285 mm • Quill stroke: 160 mm • Column diameter: 125 mm • Table size / T-slot size: 460 x 460 mm / 14 mm • Base working area: 420 x 340 mm • Motor output (S1 100%): 1.5 kW / 400 V • Motor input (S6 40%): 2.2 kW / 400 V • Machine dimensions (W x D x H): 540 x 900 x 2120 mm • Weight: approx. 360 kg Features • Infinitely variable speed control, ideal for adjusting the desired cutting speed • Machined base (420 x 340 mm) with integrated coolant pump • Integrated digital display for speed and drilling depth • Heavy-duty cast iron table with rotatable and tiltable work surface • Supplied as standard with 3 automatic spindle feeds • Guaranteed concentricity ≤ 0.02 mm measured in the quill • User-friendly membrane keypad operation • Standard with automatic quill feed and tapping device • Robust, ground steel column designed for heavy-duty use Scope of Delivery • Gear-driven drill chuck 1 – 13 mm / B16 • Drill chuck arbor MK 4 / B16 Bedex Agiuepfx Aaaolf • Reducing sleeves MK 4 / 3, MK 3 / 2 • Delta VFD frequency converter • Automatic tool ejector • Coolant system • Electromagnetic spindle feed • Tapping device • LED machine lamp • Digital speed display • Digital drilling depth display • Height-adjustable safety guard

Condition: new, COLUMN DRILLING MACHINE IBERDRILL AZ 40 TECHNICAL DATA - STANDARD max. drilling capacity for steel (St 60) at continuous power S1 Ø 40 mm max. drilling capacity for grey cast iron (GG 20) at continuous output S1 Ø 45 mm max. tapping capacity for steel (St 60) at continuous output S1 M 33 max. tapping capacity for grey cast iron (GG 20) at continuous output S1 M 39 tool holder in spindle MK 4 max. spindle stroke (drilling depth) 180 mm motor power spindle 4,12 kW Drive V-belt Speed adjustment stepless speed range for 50 Hz - motor, n = 1.500 rpm 100 - 2.000 rpm Feed automatic or manual Number of automatic feeds 3 gears range of automatic feeds 0,1 - 0,2 - 0,3 mm/rev Table dimensions (width x depth) 480 mm x 480 mm column diameter 150 mm distance spindle center / column 350 mm Machine weight (net) 460 Kg Blsdpfx Aegy E U Djaasf Gross weight 510 Kg Dimension transport v. (length x width x height) 2,3 m x 0,6 m x 1,1 m STANDARD EQUIPMENT / BASIC MACHINE V-belt drive with frequency converter infinitely variable speed adjustment via potentiometer digital speed display 3 automatic feeds mechanical clutch scale with adjustable drilling depth automatic feed reversal during thread cutting automatic tool ejector movable, rotatable and tiltable work table ( type MGI ) machine base plate with machined support surface, T-slots and integrated coolant device integrated lighting EMERGENCY STOP button chip protection device with micro switch

Condition: new, Bernardo Gear Column Drilling Machine GHD 28 SV with Digital Depth Display Technical Specifications - Maximum drilling capacity: 28 mm - Maximum thread cutting: M12 - Quick-release drill chuck: 1 – 16 mm / B 16 - Morse taper: MK 3 - Spindle speed (8): 75 – 3010 rpm - Feed range: 0.004 / 0.006 / 0.009 / 0.012 / 0.10 / 0.15 / 0.30 mm/rev - Throat: 320 mm - Max. spindle to table distance: 810 mm - Spindle to baseplate distance: 1230 mm - Quill stroke: 150 mm - Column diameter: 105 mm - Baseplate working area: 325 x 360 mm - Table size / T-slot size: 500 x 350 mm / 14 mm - Motor output S1 100%: 0.90 / 1.2 kW (400 V) - Motor input S6 40%: 1.35 / 1.7 kW (400 V) - Machine dimensions (W x D x H): 600 x 700 x 1900 mm Bodpfx Ajd Err Ueaaslf - Weight: approx. 290 kg Features • Digital quill stroke display for convenient operation • Supplied as standard with automatic quill feed (0.04 – 0.3 mm/rev) • Helical gear transmission for optimal power transfer • High efficiency and smooth operation thanks to helical gears with steel reinforced fiber material • Automatic quill feed disengages when preset drilling depth is reached • Directional switch for clockwise and counterclockwise rotation for thread cutting • Stable, ground steel column designed for heavy-duty use • 8 switchable speeds via powerful two-stage drive motor Scope of Delivery • Quick-release drill chuck 1 – 16 mm / B 16 • Drill chuck arbor MK 3 / B 16 • Reducing sleeve MK 3 / 2, MK 3 / 1 • Digital drilling depth display • Automatic tool ejector • Forward/reverse switch • Height adjustable safety guard

Condition: new, Bernardo GB 55 NC Vario geared pillar drilling machine Technical specifications Drilling capacity in steel 50 mm Drilling capacity in cast iron 60 mm Thread cutting max.M42 Drill chuck 1 - 13 mm / B 16 Morse taper MK 4 Spindle speed / 2 steps 50 - 316 / 316 - 2200 rpm Feed range 0.08 / 0.12 / 0.17 / 0.24 / 0.35 / 0.50 mm/rev Projection 360 mm Distance spindle / table max. 580 mm Distance spindle / base plate 1185 mm Quill stroke 225 mm180 mm Column diameter Table size / T-slot size 570 x 480 mm / 14 mm Working surface base plate 435 x 445 mm Bjdpfx Ajrivbvoaaolf Motor power 3.0 kW Machine dimensions (W x D x H) 750 x 1020 x 2340 mm Weight approx. 630 kg Scope of delivery Sprocket chuck 1 - 13 mm / B 16 Drill chuck arbor MK 4 / B 16 Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 Motorized table stroke Coolant device Touch screen Automatic tool ejector Electromagnetic spindle feed Thread cutting device Initial filling with Shell Tellus 46 LED machine light Digital speed display Digital drilling depth display Height-adjustable protective cover

Condition: new, PILLAR DRILLING MACHINE IBERDRILL AZ 34 TECHNICAL DATA - STANDARD max. drilling capacity for steel (St 60) at continuous power S1 Ø 34 mm max. drilling capacity for grey cast iron (GG 20) at continuous output S1 Ø 40 mm max. tapping capacity for steel (St 60) at continuous output S1 M 27 max. tapping capacity for grey cast iron (GG 20) at continuous output S1 M 33 tool holder in spindle MK 4 max. spindle stroke (drilling depth) 150 mm motor power spindle 3 kW Drive V-belt Speed adjustment stepless speed range for 50 Hz - motor, n = 1.500 rpm 100 - 2.000 rpm Feed automatic or manual Number of automatic feeds 3 gears range of automatic feeds 0,1 - 0,2 - 0,3 mm/rev Table dimensions (width x depth) 420 mm x 400 mm column diameter 125 mm distance spindle center / column 300 mm Machine weight (net) 360 Kg Gross weight 410 Kg Transport dimension (length x width x height) 2.3 m x 0.6 m x 1.1 m STANDARD EQUIPMENT / BASIC MACHINE V-belt drive with frequency converter infinitely variable speed adjustment via potentiometer digital speed display 3 automatic feeds mechanical clutch scale with adjustable drilling depth automatic feed reversal during thread cutting automatic tool ejector movable fixed work table (type MF) machine base plate with machined support surface, T-slots and integrated coolant device integrated lighting EMERGENCY STOP button chip protection device with microswitch monitoring Bledpfx Aaegy E S Eeajf thermoma

Condition: like new (used), Year of construction: 2025, Column Drilling Machine BOMA SB 32 - V - CE marking - Exhibition machine / Unused - Morse taper MT 3 - Infinitely variable speed control - Thread cutting device up to M16 - Spindle speeds / Infinitely variable 50-2100 rpm - Spindle stroke 135 mm - Worktable rotatable 360 degrees - Worktable size 415x375 mm - Column diameter 100 mm Bodpfx Ajyrnm Ueaaolf - Throat depth 250 mm - Distance spindle - table 850 mm - Distance spindle - base plate 1190 mm - Drill chuck - Documentation Dimensions: LxWxH 0.6x0.9x1.85 meters / Weight 280 kg Errors and omissions excepted

Condition: ready for operation (used), Year of construction: 1975, Column drilling machine Make CORDIA Type: S-18 Year.ca.1975 drilling in steel max.18mm spindle mounting : MK2 spindle speed : 90 -1450 rpm spindle stroke : 120 mm table:350 mm X 400 mm clamping surface;270 mm X 320 mm Bljdpehtri Ejfx Aaajf Space requirement : width 420mm depth 650mm height:2000 mm Weight:ca.350 Kg. Machine is ready for use .