Used Column Drilling Machine for sale (66,738)

Condition: used, Column Drilling Machine INFRATIREA - ORADEA Type PH - 031 Serial No. Year of manufacture 1975 Drilling capacity 40 mm Spindle taper MK 4 - short quill Throat depth 320 mm Quill stroke 250 mm Table size 400 x 400 mm Column diameter 160 mm Lhodpfx Astrpifjhzsb Spindle speed 85 - 1500 rpm, 6-speed gearbox Motor power 2.2 kW Power supply 400 Volt, 50 Hz - Spindle speed adjustable over 6 gear steps - Right and left-hand rotation - Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/rev - Swivel drill table - Table height adjustment via hand crank - Clamping surface on machine base - Coolant pump integrated in base Required space L x W x H 1000 x 600 x 2450 mm Weight 700 kg

Condition: used, Column drilling machine IXION - MAXION type Unimax 3 serial no. 201516 year of construction 2009 Drilling capacity 30 mm Spindle holder MK 3 - short quill throat 260 mm Quill stroke 125 mm Table size 360 x 500 mm Column diameter 110 mm Lhsdpfx Ahsrz Tuwezjb Spindle speed 80 - 3200 rpm infinitely variable Motor power 0.8 / 1.5 kW Mains connection 400 Volt, 50 Hz - Spindle speed via 2 V-belt stages, 2 motor speeds and infinitely variable via variator drive - Motor speed level 1 for clockwise and counter-clockwise rotation, motor speed level 2 for clockwise rotation - Handwheel for quill fine feed - Drill table height adjustment via hand crank - RÖHM quick-action drill chuck Ø 1 - 16 mm - Emergency stop button Space requirement L x W x H 800 x 530 x 1800 mm Weight 230 kg Very good condition

Condition: new, Semi-automatic drill Ljdpsd Rhy Dofx Ahzjhb - Precise lifting frame for accurate drilling results and hard requirements - stepless drilling stroke adjustment with automatic return stroke via limit switch - Two-hand safety control - Horizontal and vertical workpiece clamping via foot switch - Automatic or manual operation - Position-accurate adjustment in the Y-axis - Support table right/left with scale and folding stops We will be happy to provide you with an offer tailored to your requirements.

Condition: new, drilling capacity: 32 mm, - MK4 - 80/2130 tons - 2-speed engine Lhjdpfjtttlfox Ahzsb - Rotates clockwise and counterclockwise - Table 385 x 335 mm - Table can be rotated - Emergency stop - Protective cap - Documentation - 400V

Condition: good (used), Year of construction: 2016, machine/vehicle number: PRJ052353, Offer 25490 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Drilling performance in steel ST 60: 50 mm - Drill spindle taper: MK 4 Lhjdoxy Hp Aspfx Ahzsb - Drill spindle stroke: 160 mm - Digital speed display - Throat depth: 300 mm - Swivel table with vice: 440 x 440 mm - Column diameter: 145 mm - Electromagnetic feeds: 0.1 – 0.2 – 0.3 – 0.4 mm/rev - Infinitely variable drill spindle speeds with digital readout: 200 – 3200 rpm - Drive: 400 V / 1.8 / 2.9 kW - Lighting - Electrical foot switch - Required space (approx.): W 650 x H 1900 x D 800 mm - Weight (approx.): 470 kg

Condition: good (used), - MK4 - Automatic feed Ljdpfoxc N T Ajx Ahzohb - Variomatic - Rotates clockwise and counterclockwise - Cooling - Machine vise - Lighting - 380V

Condition: like new (used), Year of construction: 2021, Like-new drill press from Arodrill (Denmark) Capacity up to: 25 mm Mounting: MC 3 RPM: 220 - 1680 Year of manufacture: 2021 Lhodewc Nhiepfx Ahzeb

Condition: new, Year of construction: 2025, For delivery times and current prices, please contact us directly. Dimensions and weights: Column diameter: 150mm Length (product): approx.880mm Width/depth (product): approx.595mm Height (product): approx.2445mm Weight (net): approx.550kg Drilling capacity: Drilling capacity steel (S235JR): 40mm Continuous drilling capacity steel (S235JR): 35mm Tapping steel (S235JR):M 30 Drilling table: Drilling table work surface length: 530mm Drilling table work surface width: 530mm Drilling table T-slot size:18mm Drilling table T-slot number: 3 Drilling table T-slot spacing: 125mm Drilling table rotation: 360 Drilling table inclination: ± 90 Load capacity drilling table: 250kg Distance spindle - drill table max.:740mm Distance spindle - drill table min: 130mm Speed range: Speed range: 30 - 2430min¯¹ Number of speed ranges: 4 steps Speed control: electronic Electrical data: Drive motor power: 2.2kW Supply voltage: 400V Mains frequency: 50Hz Machine base: Distance spindle - machine base max.: 1210mm Machine base working surface length: 435mm Machine foot working surface width: 445mm Machine foot T-slot size: 18mm Machine foot T-slots quantity: 2 Machine foot T-slot distance: 150mm Spindle: Quill stroke: 170mm Spindle holder: MK 4 throat: 350mm Lodpfjq T Ry Usx Ahzjhb Quill feed: automatic Quill feed speed: 0.1 - 0.2mm/rev Speed levels quill feed: 3 levels Motor(s): Coolant pump Power drive motor: 100W

Condition: good (used),

Condition: good (used), Internal article no.: 24035 Column drilling machine Solid TB15 Ljdpfett Ahpex Ahzshb 2 speed settings Left-right rotation Spindle holder: MK2 Quill stroke: 100mm (with adjustable depth stop) Speed adjustable via belt. Speed levels unfortunately not visible. (Presumably up to 4000 rpm) Table: 320 x 260mm Dimensions (LxWxH): 60 x 40 x 170cm Weight: approx. 300Kg

Condition: like new (used), Gillardon column drilling machine type GB 30 V, speed 60-1800 rpm, automatic feed, very good condition Lhedpfx Ahoxpxbcozsb

Condition: good (used), spindle speed (max.): 9,600 rpm, spindle speed (min.): 200 rpm, – MK3 – 200–9600 rpm – Right- and left-hand rotation – Thread cutting function – Throat depth 120 mm – Steplessly adjustable speed – Thread cutting function Lhodpfx Ahoxq Rwfszob – Protective cover – Emergency stop switch – 40V

Condition: good (used), Year of construction: 1976, Stock number: 2909 Manufacturer: ORADEA - Infratirea Year of manufacture: 1976 Machine number: 62981 Type: 6GMA1 Mounting: MK5 Drilling capacity: 63 mm Table: 600 x 700 mm Clamping surface: 450 x 580 mm Distance spindle - table min/max: 200 / 890 mm Vertical adjustment of the head: 690 mm Stroke: 200 mm throat depth: 350 mm Speeds: 56 to 1,220 rpm Feed rate: 0.1 / 0.16 / 0.25 / 0.4 mm/rev Accessories / equipment: Thread cutting option, automatic feed, integrated coolant pump Connection: 4.15 kW Weight: 1.1 t Footprint: 700 x 1,200 mm Dimensions: 700 x 1,200 x 2,600 mm Ljdju Tip Repfx Ahzehb

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 3, total height: 1,800 mm, total width: 500 mm, total length: 600 mm, table width: 500 mm, table length: 355 mm, spindle speed (max.): 3,020 rpm, spindle speed (min.): 100 rpm, type of input current: three-phase, Equipment: type plate available, 3 Phase 380V, 2 speed motor is running fine! Geared head with 8 speeds. Spindle RPM adjustable from 100 up to 3020. MT3 spindle taper. Tool ejector. Maximum drilling depth: 130 mm Table size: 500x355 mm Head & table height adjustable. Lhedpfxjxl Hpao Ahzjb Good working condition! Made in Sweden. Overall dimensions: 60x50x180 cm Contact us for shipping possibilities! € 1,850.00 EX VAT!

Condition: new, Year of construction: 2025, Continuous/standard drilling capacity 15/18 mm (in E335/St60) 17 Nm Tapping capacity M12 (pitch-dependent) Spindle taper MK II Drilling depth 70 mm Throat 220 mm Max. distance spindle/work surface: 750 mm Column diameter 70 mm Usable work surface W x L 300 x 250 mm T-slot size (arm), spacing (mm), width (mm) Number 2, 125, 14/26 Ljdpfx Aexgdn Ajhzohb Speed display: Digital Drilling depth display: Digital Drilling depth stop: adjustable stop ring Feed: manual Table height adjustment: hand crank/rack and pinion Motor, three-phase 230V with Quefren frequency inverter: 0.75 kW Spindle speed: 40–4,000 rpm Machine dimensions: 420 x 540 x 1,780 mm Weight: 88 kg Optional Accessories Drill package 3 consisting of: - Machine vice [felix] 2.0 100 mm - Quick-action drill chuck 3–16 mm (accuracy 0.17 mm) - Taper shank MK 2 B18 and reducing sleeve MK 2 to MK 1 €490.00 Factory warranty: 3 years Free delivery including packaging (within Germany only) NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT DISTRIBUTION PARTNER AND CAN OFFER YOU THE COMPLETE FLOTT PRODUCT RANGE! REQUEST A QUOTE!

Condition: excellent (used), For sale is an as-new Teknatool Nova Voyager DVR pillar drill equipped with a powerful 2 HP direct-drive motor. The machine is in excellent condition and has been reconditioned and inspected by our qualified staff. (Fully operational) Lhjdpoxzf H Aofx Ahzob Technical specifications: - Pillar drill with DVR drive - Speed range: 50 - 3,000 (5,500) rpm - Forward/reverse operation - Variable speed control - Height: 1,794 mm, Width: 448 mm, Depth: 578 mm - Spindle travel: 152 mm - Table size: 419 x 419 mm - Motor: 2 HP (230 Volt) - Keyed drill chuck 3 - 16 mm The machine is located at A-8561 Söding and can be inspected and collected during our business hours at any time. Subject to prior sale! Related terms: column drill, bench drill, drill press Reference: DT58003 SHIPPING NOT POSSIBLE!!!

Condition: used, Workbench Column Drilling Machine FLOTT type 16 STG/R2 Spindle: CM2 Spindle exit: 100 mm Spindle speed: from 80 to 2000 RPM Table size: Length 340 mm x Width 280 mm Maxi distance spindle nose/table (lower table): 400 mm Throat depth: 240 mm 2 speed motor 2,2 kW Drilling/tapping function Adjustment by belt variator Electronic RPM speed not working Voltage: 380 V Lhodpfjxx Tncox Ahzsb Width: 500 mm Depth800 mm Total height: 1100 mm Weight: approx 150 kg

Condition: used, Column Drilling Machine PRECIS Ø 23 mm Cone: CM2 Maxi diameter: Ø 23 mm Rotation: from 165 to 4400 RPM Table size: 390 x 190 mm Spindle travel: 100 mm Column diameter: Ø 120 mm Throat depth: 240 mm 2 speed motor Mini chuck/table height: 100 mm Maxi chuck/table height: 350 mm Manual descent Manual hydraulic lifting of the table Voltage: 380 V Width: 700 mm Depth: 1000 mm Ljdpexx Tkwofx Ahzjhb Total height: 1800 mm Weight: approx 800 kg

Condition: used, Year of construction: 1997, Workbench Column Drilling Machine CINCINNATI PE 32 Year of construction: 1997 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 100 to 3800 RPM Table travel X: 290 mm / Travel Y: 150 mm Speed variator by belt variator Maxi height base/spindle nose: 500 mm Mini height base/spindle nose: 260 mm Lhsdpfjxx Nyzex Ahzob Throat depth: 300 mm Spindle sleeve diameter: Ø 80 mm Equipped with one cross table dimensions: L 430 x W 240 mm Voltage: 380 V Width: 900 mm Depth: 1100 mm Total height on base: 2000 mm Weight: approx 400 kg

Condition: new, Year of construction: 2022, functionality: fully functional, We are selling a pillar drill without quill feed. Technical data: - infinitely variable spindle speed (frequency converter with reduction gear) - Speed: from 65 rpm to 2000 rpm - Speed range I 65-540 rpm - II 245-2000 rpm - Taper in the spindle: MK 4 - Spindle diameter: 75 mm - Spindle stroke: 150 mm - Column diameter: 150 mm - Table size: 560x470 mm - 16 mm T-slots in the table - max. drilling diameter: 40 mm - Tapping capacity: M24 - Clamping surface base plate: 485x685 mm - Distance spindle - table: 850 mm - Distance spindle - base plate: 1180 mm - Main motor power: 1.5 kW - Weight: 340 kg Ljdpfx Ahjvbbycszehb - Dimensions: 670x580x2000 mm - Integrated coolant system - CE conformity

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 3, total height: 1,900 mm, total width: 600 mm, total length: 900 mm, table width: 400 mm, table length: 550 mm, overall weight: 360 kg, spindle stroke: 150 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 160 rpm, input voltage: 380 V, Equipment: rotational speed infinitely variable, type plate available, 3-phase 380V, 2-speed motor is running fine. Stepless speed adjustment thanks to variomatic spindle drive. Spindle RPM adjustable from 160 up to 2800. MT3 spindle taper. Albrecht 1-13mm drill chuck included. Chuck eject tool included. Drilling depth adjustable. Maximum drilling depth: 150mm Table size: 550x400mm Table height adjustable. Weight: 360KG Overall dimensions: 90x60x190cm Made in Germany Lhsdpfx Ahjwy Ec Dszsb Overall good condition. Contact us for shipping possibilities! € 2,350.00

Condition: new, SHOWROOM MACHINE For sale is an as-new Teknatool Nova Voyager DVR 18" pillar drill with a 2 HP magnetic motor. The showroom machine is in its original condition, so you receive the full warranty. Technical data - Working area diameter: 18" = 457 mm - Distance spindle centre to column: 228.5 mm Lhodpfx Ahsxu Dfkjzjb - Drilling depth: 152 mm (spindle travel) - Spindle taper: MT2 - Drill chuck clamping range: 1-16 mm - Forward/reverse rotation - Keyed drill chuck The machine is located in A-5431 Kuchl and can be inspected and collected at any time during our opening hours. Subject to prior sale!

Condition: new, Infinitely variable pillar drill with fully-fledged tapping unit. Equipped with digital speed display as standard. Drilling table adjustable via rack and swivels around the column. Motor protection. Technical data: Drilling capacity: 40 mm Thread cutting: M 24 Spindle: MK 4 Drilling depth: 150 mm Spindle speeds, infinitely variable Range A: 65 - 540 1/min Range B: 245 - 2000 1/min throat depth: 265 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Ljdoqfdywjpfx Ahzshb Column diameter: 115 mm Table size: 560 x 470 mm / 14 mm Base plate size: 685 x 485 mm Dimensions, approx. (W x D x H): 580 x 950 x 2000 mm Connected load: 1.7 kVA Weight, approx.: 370 kg Equipment - Gearbox reduction gear - Large machine table - Digital speed display - Stepless speed adjustment - Thread cutting device - Table clamping and height adjustment from the front - Drilling depth stop - Overload protection Scope of delivery: - Coolant device - Two MK 3/2 reducing sleeves - LED machine light - Height-adjustable protective cover with micro limit switch - Operating instructions - CE/IEC conformity

Condition: new, Drilling capacity max.: 30 mm Thread cutting: M 16 Tool rear ham: MK 3 Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - CE / IEC, German Documentation and German Service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 Lodped R Nv Iofx Ahzohb - Coolant device - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Condition: new, Year of construction: 2025, Brush cutting device Drilling depth switch-off programmable Drilling depth and speed display - digital Thread cutting device M20 (depending on pitch) Infinitely variable speed from 125 - 4000 rpm in two stages, stage change via belt repositioning. Drilling capacity 25/30 mm Spindle MK 3 Drilling depth 125 mm Thrust 280 mm Lhjdpfxed H Rgfo Ahzob Usable table surface (swivelling) 420 x 340 mm Feed 0-300 mm/min continuously variable Table height adjustment with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor three-phase 400 V pole-changing 0.9/ 1.45 kW Weight 300 kg OPTION: - Drilling package 5 consisting of: cone mandrel, drill chuck, vice and T-slot set (€ 790.00) - Spindle stop and chip breaking module (€ 855.00) DELIVERY: free delivery including packaging NOT THE RIGHT MACHINE? WE ARE FLOTT'S SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!