Used Cone Countersink for sale (1,073)

Condition: good (used), fixed point, fixed center point, fixed Morse taper, fixed center point, center points -Manufacturer: WMW ABW, fixed centering tip with mounting bore -Recording: Morse cone MK5 -Bore: Ø 8 mm -Number: 2x centering tips available -Price: per piece Tedpfoi Hmnlex Abuod -Dimensions: Ø 46/200 mm -Weight: 1.9 kg/pc.

Condition: good (used), Travel X / Y / Z: 475 / 330 / 280 mm Table size W x D: 650 x 250 mm Tjdpfsd Dgdyex Abued Quill stroke: 60 mm Spindle speed: 63 - 2800 rpm / 12 steps Mounting cone: ISO 30 / DIN 2080, ISO 40 / DIN 2080 Weight: approx. 950 kg Machine size W x D x H: approx. 1100 x 1400 x 1600 mm Spindle bore: 17.8 mm (24.8 mm) Movement range: Longitudinal travel. table: 330 mm Table: 330 mm* 1 handwheel rotation: 5 mm Vertical travel: Console: 475 mm* 1 handwheel rotation: 2 mm Transverse travel: Milling spindle carrier head: 400 mm 1 handwheel rotation: 5 mm *These two directions of movement are provided with automatic feed and can be controlled by programs. Shortest cycle time 15 seconds, or 4 program sequences per minute. Reading accuracy at the scale drums: 0.02 mm Main motor: Milling head 2 speeds Engine: 1.1/1.5 kW, 1500/3000 rpm Automatic feeds: Rapid speed motor: 0.55 kW, 1000 rpm Rapid traverse lengthwise: 2500 mm/min Rapid traverse vertical: 1000 mm/min Working feed motor: 0.2 kW max. Control range in longitudinal direction 4 - 500 mm/min Control range in vertical direction: 1.6 - 200 mm/min Coolant device: Engine: 0.15 kW, 3000 rpm Coolant pump capacity: 20 l/min Coolant tank capacity: 30 l

Condition: good (used), Year of construction: 1984, Multi-spindle head, multi-spindle drill head, drilling gear -Joint multi-spindle head -Max. x drill Tedpfx Ajdym D Tsbujd -7x drill built-in collet: mm -min. Distance drill: mm -Weight: 11.3 kg Articulated multi-spindle heads are: variable tools for various machining operations such as drilling, thread cutting, countersinking, reaming, milling, turning, with which several holes can be machined at once.

Condition: new, functionality: fully functional, Year of construction: 2026, roller diameter: 200 mm, roller length: 2,000 mm, working width: 2,000 mm, sheet thickness steel (max.): 8 mm, type of input current: three-phase, working length: 2,000 mm, Hydraulically controlled four-rolls bending machine Make BIKO, model B4 2020 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 2000 mm Top roll diameter: 200 mm Lower roll diameter: 180 mm Side rolls diameter: 160 mm Guaranteed installed power: 5.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,950 kg Length: 3,200mm Width: 1,000mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 1000 mm Rolling capacity (full working width) 5 mm Bending capacity (full working width) 4 mm from pipe diameter 265 mm Standard equipment: Linear guide system for roller movement Extremely wide bearing blocks Needle bearing for the roller rotation Tjdpfxsd Iclrj Abusd Extra heavy double hinged folding release Hardened rolls for high wear protection Hydraulic parallelism system of the side rollers Digital display for the position of the side rolls and the bottom roll cone bending device Control on the swiveling control panel Safety lanyard with emergency stop and CE certification

Condition: good (used), three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 139 mm -Bolt circle: Ø 170 mm -Through hole: Ø 80 mm Tsdpfxodq Tt Hj Abujd -Weight: 24 kg

Condition: good (used), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck Tedpfxjd Itcns Abujd -Mouth size: Ø 250 mm -Cone: Ø 94 mm -Thread: M20 -Gradient: 2.5 mm -Weight: 33.3 kg

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 380 mm -Inner diameter: 103 mm -Mount: Cone Ø 135 mm Tedpfx Asf Ek Hmsbuod -Bolt circle: Ø 170 mm/M16 -Bolt circle: Ø 335 mm/M24 -Dimensions: Ø 380 x 105 mm -Weight: 37 kg

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: WMW ABW, rotating center point -Type: ZN 205 -Recording: MK5 -Number: 9x centering tip available -Price per piece -Dimensions: Ø 92 x 270 mm / Ø 92 x 270 mm Todefr Iw Dspfx Abuod -Weight: 4.7 kg /pc.

Condition: used, Year of construction: 1991, Allis Chalmer 60 109 M-II Primary Gyratory Crusher 2 complete units, intake size: 1,500 mm (60 inches), cone diameter: 2,725 mm (109 inches), output size: 175 to 250 mm (7 to 10 inches), throughput: approx. 4,700 to 6,400 t/h, without electric motor (required drive power: 750 kW), including one hydraulic hammer each, Todpfx Aovg A Rajbujd total weight: approx. 570 t per unit

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 Todpfsqwlmqex Abusd turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. The machine offers the following processing options: - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) - countersinking - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) - Radial compensation of the tool by means of patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector Tedpfx Aerbz T Nebujd - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine portal

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Tedewc Afhopfx Abujd Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 Tsdpfx Ajwc Ri Iobusd 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Todswc Rk Espfx Abued Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Year of construction: 2025, Weighing unit with 10 weighing heads (large hoppers for bulky products) for very precise weigh checking, with 5.5-Liter volume each. Special design for salad or similar products: dimpled surface, adjustable rotating top cone and stronger linear feeder, stagger dump, washdown construction. - Specifications: max. speed of the machine in neutral: 40 cycles/minute; weighing range: 10-5000g, accuracy: +/- 0.5-2.0g; touchscreen (large version) operation; stainless steel; 220V, 2.0kW; L1900xW1266xH1900; 700/750kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Tjdpfx Aov Nmrysbusd Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, functionality: fully functional, Year of construction: 2026, BIKO B4 2014 Linear Four roll bending machine Hydraulically controlled four-rolls bending machine Make BIKO, model B4 2014 Technical specifications: Number of Rolls: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 145 mm Lower roller diameter: 130 mm Side roller diameter: 130 mm Guaranteed installed power: 5.5 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 2,300 kg Length: 2,900mm Width: 900mm Height: 1,000mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 4 mm Bending performance (full working width) 3 mm from pipe diameter 725 mm Rolling capacity (full working width) 3 mm Bending performance (full working width) 2 mm from pipe diameter 190 mm Standard equipment: Linear guide system for rolls movement Extremely wide bearing blocks Tsdpfjiinknox Abujd Needle bearing for the rolls rotation Extra heavy double hinged folding release Hardened rolls for high wear protection Hydraulic parallelism system of the side rolls Digital display for the position of the side rolls and the bottom roll cone bending device Control on the swiveling control panel Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, 4 HEL 3128 Four rolls bending machine Electronically controlled, hydraulic four-rolls bending machine Make FACCIN, model 4 HEL 3128 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 3050 mm Top roll diameter: 285 mm Lower roll diameter: 275 mm Side rolls diameter: 205 mm Certified rolls hardness: 950-1050 N/mm² Pressure force against the top roll: 150 tons Working pressure at maximum power: 190 bar Guaranteed installed power: 11 kW (15 hp) Tjdpoiink Sjfx Abued Guaranteed maximum rotation speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450mm Width: 1,520mm Height: 1,450mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 12 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,425 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6.5 mm from pipe diameter 370 mm Standard equipment: Double linear guide system for rolls movement Extremely wide bearing blocks MCS double bearing system for the rolls rotation Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device FACCIN AP package CNC control PGS-ULTRA

Condition: new, functionality: fully functional, Year of construction: 2026, TECHNICAL SPECIFICATIONS: Number of rolls FOUR Geometry linear guides Maximum plate width mm 3000 Top roll diameter mm 390 Tjdpfegd T R Djx Abusd Bottom roll diameter mm 370 Side rolls diameter mm 295 Installed power HP 40 Stepless variable rotation movement m/1' 4-8 Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield point 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Bending performance (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Bending performance (full working width) Ø 507 mm 16 mm • Hardened and polished rollers • Siemens NC control • Cone bending device with electronic tilting

Condition: excellent (used), Year of construction: 1988, TECHNICAL DATA. Max. clamping length: 90 mm Tool clamping height with tapered shank: 50 mm Tool clamping height with straight shank: 45 mm Max. helix angle: 45° Number of clamping positions: 1 to 99 Max. slide travel: 550 mm Max. grinding wheel diameter: 350 mm Min. grinding wheel diameter: 150 mm Grinding wheel speed (variable): up to 2700 rpm Swivel range of grinding spindle axis: 0° to 15° Grinding slide feed rate (variable): 0.05 to 16 mm/min (with 3rd and 4th axis: 0.05 to 8 mm/min) Workpiece spindle taper: ISO Taper No. 40 Tsdpfx Aewwkacsbusd Grinding Wheel Data CBN and diamond cup grinding wheel: Ø200 mm → Min. DFF: 66 (3rd axis), 76 (4th axis) Ø250 mm → Min. DFF: 16 (3rd axis), 26 (4th axis) CBN-ES cone grinding wheel: Ø200 mm → Min. DFF: 50 (3rd axis), 60 (4th axis) Ø250 mm → Min. DFF: 0 (3rd axis), 10 (4th axis)

Condition: like new (used), Year of construction: 2001, Set of clamping cones SK 50 - like new. Hardly used. Tsdpfx Aboxnldzjusd

Condition: used, Year of construction: 1988, turning diameter over bed 2000 mm turning diameter over slide rest / mm turning length / mm - Type 1 K 671 320 F3 - Year of manufacture 1988 (first commissioned in 1998) - Turning length 10,000 mm - Turning diameter over bed 2,000 mm (modified) - Faceplate diameter 1,950 mm - Faceplate clamping range 400 - 1,350 mm - Speeds 1.00 - 140 rpm - Torque 125,000 Nm - Main cutting force 130 kN max. - Automatic swiveling tailstock - Max. workpiece weight 70 tonnes Tsdpfxsxn Tz Ij Abujd - Max. workpiece weight with steady rest 100 tonnes - Drive power 100 kW - Number of bed ways 4 - Dimensions 22,000 x 6,200 x 2,900 mm - CNC control SIEMENS 840D (2010 for €220,000.00) - Support feed X-Z 0.3 - 4,000 mm/min. - Support rapid traverse X-Z 4,000 mm/min. - Inner cone dimensions 140 x 1:7 - The machine complies with CE guidelines - Includes 2 steady rests, 1 roller block, 4 jaws, boring device - Condition: very good condition

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 2,000 mm, warranty duration: 12 months, Workpiece Clamping Diameter : ø 3 – 140 mm (Optional: ø 210 mm) Workpiece Diameter : ø 3 – 310 mm Workpiece Length : 50 – 2.000 mm Centre Hole Diameter : ø 1 – 60 mm (Optional ø 100 mm) Workpiece Weight : max. 170 kg (Optional 1,000 kg) Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Tedpfx Abexrnchsued Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Grinding Process : Manual Sectors: : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex M-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex M-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Contact us for more details.

Condition: new, bore capacity in steel (diameter) 50,0 mm arm length 350 - 1.590 mm workpiece height max. 645 - 1.240 mm turning speeds 25 - 2000 U/min spindle taper MT 5 MK base plate 980 x 1.600 mm threading 42 M quill stroke 320 mm total power requirement 4,0 kW weight of the machine ca. 3.500 kg. range L-W-H 2450 x 980 x 2840 mm Description : Todpfsxaad Tox Abued - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulically controlled three-roller bending machine Make BIKO, model B3 2021 Technical specifications: Number of Reels: Three Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 215 mm Side roller diameter: 195 mm Guaranteed installed power: 7.2 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,000 kg Tjdpfx Ascuxp Tsbusd Length: 3,700 mm Width: 1,000mm Height: 1,100 mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 13 mm Bending capacity (full working width) 9 mm from pipe diameter 1075 mm Rolling capacity (full working width) 9 mm Bending performance (full working width) 7 mm from pipe diameter 280 mm Standard equipment: Double linear guide system for the roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged release Hardened rolls for high wear protection Hydraulic parallelism system of the side rolls Digital display for the position of the side rolls cone bending device Safety trip wire with emergency stop and CE certification Mobile control panel

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 32480 € 620.37 € 1550 mm 9 mm 9 mm 7 mm 7 mm 5 mm 180 mm 180 mm 150 mm 1,5 / 6 m/min 5.5 kW 3900 mm 1150 mm Tedjynmzpspfx Abusd 1250 mm 3250 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended