Used Cross Breaking for sale (4,875)

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Dsdpfx Aaevwlqqo Necd Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, saw drive: 15,000 W, power of the servo motor: 11,000 W, Machine completely overhauled / as new Djdpfx Aov Diy Aja Nocd with new electrical system new Siemens S7 control Completion upon order Cross-cut saw with chalk line detection Wood cross-sections 430x30 / 300x150 / 200x200 mm DIMTER OptiCut 602 R Saw blade diameter 650/700 mm Feed speed 120 m/min Saw motor 15 kW SEW servo drive 11.00 kW with inverter

Condition: good (used), Year of construction: 2005, saw blade diameter: 800 mm, overall weight: 2,960 kg, 15 kW; 400 V; Dsdpfx Ajygk Haoa Nocd

Condition: used, functionality: unexamined, machine/vehicle number: ABMC-1, input voltage: 380 V, Used Mitsuboshi Diamond Industrial glass breaking machine. Dcjdpfxoxmhqzs Aa Nsd Model: ABMC-1 Manufacturer: Mitsuboshi Diamond Industrial CO., LTD. Voltage: 380V (50Hz)

Condition: refurbished (used), Cross Rail Milling Machine Rsc Tccgsx Rdw Ioxasck Manufacturer: Stegherr Type: KSF Designed for milling cross rail joints, e.g. in windows, doors, and furniture. Equipped with 3 milling units: One upper and one lower milling unit perform parallel milling operations similar to angled cuts, while the third unit simultaneously performs flush milling. The machine table moves pneumatically-hydraulically. Proc Tccjw Imhcogxaef Feed and return speeds are adjustable. Dsdpfx Aox Rhwlja Njcd Foot-operated control. 2 motors, each with a power of approx. 2.2 kW Total power consumption approx. 4.5 kW Compressed air pressure: 6 bar Voltage: 380 V 50 Hz Suction connection diameter: 180 mm

Condition: used, Year of construction: 1999, functionality: fully functional, Crosscut saw, miter saw OMS FC 300 RAP 2.2 kW – after technical inspection Specification: • Technical condition – used, after inspection • Manufacturer – OMS • Model – FC 300 RAP • Blade diameter – 300 mm • Saw motor – 2.2 kW • Max. dimensions of workpiece at right angle: 95 x 125 mm (height x width) • Saw blade guards for operator safety • Extraction port – diameter 60 mm • Cutting angle adjustment: +/- 45 degrees (machine does not maintain perfect accuracy at extreme angles) • Year of manufacture – 1999 • CE marking • Overall dimensions without tables: 75 x 75 x 70 cm (L x W x H) Additional information: • The machine is in decent technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Possibility to power up and inspect the machine on site • The price listed in the auction does not include VAT or transportation costs Financing and transport: • We organize transport via MDD fleet, courier services, or external carriers • Financial support available in the form of leasing or lease loans Dedpfx Aoyg R Spja Nscd

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Log feeder, chain log infeed, and chain log conveyor – 20 m Minimum log length: 5 m Maximum log length: 14 m Holtec ES 120 – Cross-cut saw (Year of manufacture: 1995) For cutting and trimming wood in industrial applications Chain log conveyor – 4 m Cassel Metal Shark® Octa – Metal detector Dsdowlaxkopfx Aa Nscd Outfeed roller conveyor + transfer table – 7 m Control cabin Hydraulic operation Condition: perfect Manufacturer: Holtec Type: ES120 Year of manufacture: 1995

Condition: new, table length 330 mm table width 220 mm x-travel 210 mm y-travel 125 mm table height 150 mm T-slots 12 mm weight 33 kg dimensions 0,41 x 0,35 x 0,22 mm Djdpfx Aaeupw Tws Njcd Cross table with turntable

Condition: new, table length 430 mm table width 240 mm x-travel 225 mm y-travel 160 mm table height 160 mm T-slots 12 mm weight 45 kg dimensions 0,6 x 0,45 x 0,2 mm Dodpfxsupw T Rj Aa Nscd Cross table with turntable

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: SK-K-24001, Optimizing cross-cut saw line with scanner Manufacturer: Dimter Type: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 DIMTER cross-cut saw line with 1 x OptiCut 450 and F 100 feeding system with LuxScan CombiScan+ C 200 and curvature measurement Djdjwya Syspfx Aa Nscd The line was in operation until 2024, has been professionally dismantled and can be viewed.

Condition: excellent (used), functionality: fully functional, overall weight: 23 kg, Year of construction: 2016, machine/vehicle number: 20161500027, Cutting of openings up to a maximum depth of 400 mm is possible in several work steps. Suitable for creating cut-outs and channels in concrete or masonry. Optimized engine performance thanks to efficient cylinder design, digital ignition system, and X-Torq engine technology. Cutting disc pair with very stable core and excellent cutting performance. Djdpfx Aoxnm Ihsa Njcd

Condition: good (used), Code: 0252 Brand: MA BREVETTI Model: JUNIOR 275 Pneumatic double mitre saw for 45° + 45° cuts at both ends, in frames and mouldings of any shape and kind Technical data: Blade diameter mm 275 F30 Max cutting capacity: Width 70 mm - Height 90 mm Production rate approx. 700/800 cuts Motors n° 2 - 2 Hp each - rpm 2800 Power supply V.380/50 Operating pressure 6 bar Suction port diameter 100 mm Dcodpfx Aex Au A Nsa Ned Overall dimensions mm 850 x 700 x 1400 mm Weight kg 265

Condition: good (used), Year of construction: 1999, machine/vehicle number: 89257, GreCon Dimter Opticut 704 L saw from 1999. Machine dismantled from a functioning production line. Dcodpstvahlofx Aa Nsd No output ejectors; the machine requires reintegration or retrofitting. Available for inspection at our premises.

Condition: new, Year of construction: 2026, Cross splitting wedge for 16-ton log splitters Allows logs to be split into 4 parts. It features a universal mounting system compatible with most wood log splitters available on the market. Thanks to its universal mounting design, it fits the majority of commercially available log splitters. Djdpeycu T Ajfx Aa Nocd Manufacturer: Cormak

Condition: new, Year of construction: 2026, Cross splitting wedge for 14-ton log splitters Dcedpfx Aajycu R Us Njd Allows logs to be split into 4 parts. It features a universal mounting system compatible with most wood log splitters available on the market. Thanks to its universal mounting design, it fits the majority of commercially available log splitters. Manufacturer: Cormak

Condition: excellent (used), Year of construction: 1988, I sell the cross veneer guillotine Josting QFS 800. Year 1988 (2pcs. available on stock). Cutting length 800mm. Cutting height 60mm. Djdpfx Aoyc Nilsa Nscd Very good condition. Available immediately.

Condition: used, Cross table with handwheels Table size: 300 x 200 mm Travel in X: 160 mm Travel in Y: 240 mm Construction height: 141 mm - Spindle pitch 4 mm (4 mm travel per handwheel rotation) Dedpfx Aoxf Uxisa Necd - Rotatable by 340° - Dovetail guideway - 2x T-slots in the clamping surface, 14 mm Weight: 38 kg Good condition

Condition: good (used), design: Cutmatic Dedpfx Aajwzvlxj Nscd strip width: max. 2.150 mm strip thickness: max. 6 mm

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 201, saw blade diameter: 800 mm, cutting height (max.): 300 mm, cutting width (max.): 550 mm, total length: 2,000 mm, overall weight: 1,000 kg, total width: 2,300 mm, total height: 2,000 mm, working height: 940 mm, input voltage: 400 V, saw drive: 11,000 W, saw blade bore: 40 mm, operating pressure: 8 bar, Ideal cross-cut saw for the timber trade or sawmills. Solid and robust machine, well suited for beams and laminated beams, for packaged goods but also individual pieces. Can be integrated into a cantilever rack due to its compact frame construction. Saw blade emerges from below, stably guided. Dodpfsudwzcsx Aa Njcd Safe two-handed operation with large protective hood. Entire machine virtually maintenance-free. Pneumatic clamping cylinders right and left. Completely workshop-tested and ready for use. Saw blade included.

Condition: good (used), Code: 0246 Brand: OMGA Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Dedpsxztydofx Aa Njcd Weight kg 600

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Dedpfx Aaewb Hxve Nocd Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: used, Horizontal Mitre Band Saw in Swivel Bow Design JAESPA Type W 320 G Serial No. 18793 / 99 Year of Manufacture: 1999 Cutting Capacity at 90° (Round): Ø 320 mm Cutting Capacity at 90° (Square): 320 x 320 mm Cutting Capacity at 90° (Flat): 460 x 200 mm Cutting Capacity at 45° (Round): Ø 290 mm Cutting Capacity at 45° (Flat): 290 x 220 mm Cutting Capacity at 45° (Square): 240 x 240 mm Cutting Capacity at 30° (Round): Ø 200 mm Dcedpfewwaz Ajx Aa Nsd Cutting Capacity at 30° (Square): 200 x 200 mm Cutting Capacity at 30° (Flat): 220 x 200 mm Saw Blade Dimensions: 4120 x 27 x 0.9 mm Blade Speed: approx. 50 m/min Material Feed Height: approx. 630 mm Saw Motor Power: 1.5 kW Connection: 400 Volt, 50 Hz - Quick mitre adjustment via pivoting saw bow with rotary table and clamping - Infinitely variable mitre cuts from 30° - 90° - Hydraulic saw bow movement with rapid approach and return stroke after cutting - Material height detection via limit switch - Quick-adjust vice with eccentric clamping - Coolant system integrated in machine base - Emergency stop mushroom push button Required space (L x W x H): 2000 x 1150 x 1800 mm Weight: 975 kg

Condition: ready for operation (used), Cross Bar Milling Machine Dedpfew Imhcex Aa Njcd Manufacturer: Stegherr Model: KSF Suitable for milling cross bar joints, e.g., in windows, doors, and furniture Equipped with 3 milling units An upper and a lower milling unit simultaneously mill the two mitre-like cut-outs A third unit simultaneously performs the flattening The machine table is moved pneumatically-hydraulically. The forward and return speeds are adjustable. With foot switch 2 motors, each approx. 2.2 kW Total connected load approx. 4.5 kW Compressed air 6 bar Voltage 380 V 50 Hz Extraction connection diameter 180 mm Incl. 3 milling tools

Year of construction: 2024, condition: new, - 6.000mm cutting length - min. cutting length 600mm - 5 saw supports - 80 - 140 mm cutting height - 4 KW saw motor - 1,5 KW stepless feed 10-30m/min Optional Dcodpopfcgaefx Aa Ned - Disposal conveyor belts

Year of construction: 2024, condition: new, Log cross conveyor - Number of chain strands according to customer specifications - length and width according to customer specifications - powerful SEW gear motors Dedpfx Ajhmp Ibea Necd - solid pin conveyor chain with gentle rollers